Assembler
$35.11k - $52.64kGraco Inc
Graco manufactures and markets premium equipment to move, measure, control, dispense and spray a wide variety of fluid and powder materials. What does that mean? Well, we pump peanut butter into your jar, and the oil in your car. We glue the soles of your shoes, the glass in your windows and the screen on your phone. We spray the finish on your vehicle, coatings on your pills, the paint on your house and texture on your walls. Graco is part of your daily life.
Job Purpose
Under general supervision, complete basic pneumatic, electrical, and mechanical assemblies, following established assembly procedures and work instructions.
QED Environmental Systems, a Graco company, is located in Dexter, Michigan, just west of Ann Arbor. QED is the leading manufacturer of innovative environmental products. For over 30 years their expertise has included Pumping Systems, Landfill Products, and Air Strippers.
Graco was proud to be named a Best Place to Work in Manufacturing and Production by Fortune Magazine in 2019. Essential DutiesMaintain accurate job punch time using company supplied system
Build sub-assemblies, kits, and finished goods
Retrieve and maintain inventory in work cell locations
Clarify specifications by communicating with supervisor
Box finished assemblies
Clean up and organize work area daily
Assist other employees as required
Perform other duties as assigned by supervisor or manager
Position Requirements
Essential
High School diploma or equivalent
Six (6) to twelve (12) months of related experience
Basic mechanical, electrical, and pneumatic skills
Some problem-solving skills
Ability to read and follow blueprints, work instructions and manufacturing procedure numbers
Experience using hand and power tools, and limited use of basic electronic test equipment
Basic computer skills
Desirable
Associates Degree in Electrical/Electronics/Mechanical, Maintenance or related Technical Degree
Work Environment
Factory environment
Full-time
Monday - Friday
Overtime may be required
Climate controlled
Limited outside environment work required
Physical Requirements
Ability to lift up to 75 lbs
Ability to push/pull
Ability to bend, stoop, twist, and turn
In an 8-hr workday, must be able to sit 1 hr, stand 3 hrs, and walk 4 hrs
Good hand/eye coordination
Extensive periods of walking and/or standing
Ability to withstand exposure to heat and cold
Requires frequent repetitive elbow movements and simple grasping with both hands and occasional firm grasping and fine manipulation with both hands
Correctable vision
QED Environmental Systems is an equal employment opportunity employer and qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin.
Updated September 01, 2023
Applicants must be legally authorized to work in the United States. This role is not eligible for immigration sponsorship now or in the future (e.g., H-1B, TN, F-1 OPT).
At Graco, you truly make a difference. Your unique talents contribute to our organizational growth and future. Not only do you make a difference, but Graco’s culture empowers employees to create their own career path. Whether you choose to advance within your current department or explore new opportunities in different divisions, you have the ability to build your future. Our managers are here to provide support and guidance as you continue to grow within your career.
Graco has excellent opportunities available to individuals who want to be part of a fast-moving, growing company that is committed to quality, innovation and solving fluid handling problems for our customers. Graco is proud to be named a Best Place to Work by Fortune Magazine in 2016, 2018, 2019, 2021 & 2022. Graco offers attractive compensation, benefits and career development opportunities. Graco’s comprehensive benefits include medical, dental, stock purchase plan, 401(k), tuition reimbursement and more.
Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit
The base pay range for this position is listed below, exclusive of fringe benefits or other compensation. If you are hired, your final base hourly rate will be determined based on factors such as geographic location, skills, competencies, education, and/or experience. In addition to those factors, we will also consider internal equity of our current employees. Please keep in mind that the range provided is the full base salary range for the role. Hiring at or near the maximum of the range would not be typical to allow for future and continued salary growth.
$16.88 - $25.31- ...Our client, a manufacturing industry leader, is seeking an Assembler to join their team. As an Assembler, you will be part of the production department supporting the manufacturing process. The ideal candidate will have attention to detail, strong problem-solving skills...SuggestedPermanent employmentTemporary workFlexible hoursShift workDay shiftAfternoon shift
$18 per hour
Job Description: Material Handler * Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending...SuggestedTemporary workShift work$20 per hour
...Catheter Room Assembly Position Position will be in the catheter room in Dexter: Assembly with small components as well as larger tasks such as using dip tanks for the catheters. 2nd shift: 2:30pm-10:30pm. Training could fall on first or second shift, but most likely...SuggestedImmediate startAfternoon shift- ...We are seeking a detail-oriented Medical Assembly Technician to join our manufacturing team. In this role, you will perform a variety of assembly and production tasks to support the manufacturing of high-quality medical devices and components. The ideal candidate will...SuggestedShift workAfternoon shift
- ...Job title : Medical Assembler Client : Medical Device Manufacturing Company Duration : 12-Month Contract Assignment Location : Dexter, MI 48130 Shift : 1st Shift (6:00 AM - 2:00 PM CST) 2nd Shift (2:00 PM - 10:00 PM CST) Description...SuggestedContract workShift workDay shiftAfternoon shift
- ...Job Description Job Description Job Title: Assembler I Client: Medical Device Manufacturing Company Location: Dexter, MI 48130 Duration: 12-Month Contract Shift: 2nd Shift – 2:30 PM–10:30 PM Description: Job Summary Entry-level manufacturing...Contract workShift workDay shiftAfternoon shift
- ...Assembly Technician We are seeking a reliable and detail-oriented Assembly Technician to join our team. In this role, you will assemble products across various stages of production using visual aids, diagrams, schematics, and process flow sheets. If you take pride...Afternoon shift
$20 per hour
...Description Salary: $20 per hour + none Reference: 1162960-2 Job Description: We are seeking a reliable and detail-oriented Assembly Technician to join our team. In this role, you will assemble products across various stages of production using visual aids,...Hourly payTemporary workWork experience placementAfternoon shift$17.5 per hour
...Job Title: Clean Room Assembler Location: Ann Arbor, MI Schedule: Monday to Friday Hours: 6:00am-3:00pm (1 hour lunch) Compensation: $17.50 per hour Endress+Hauser Optical Analysis - Job Description Assembly Operator Pay Type: Hourly FLSA Status...Hourly payWork at officeLocal areaMonday to Friday$17 per hour
...Production AssemblerThe Production Assembler plays a crucial role in the manufacturing process, contributing to the manufacture of high-quality products. Responsible for executing assembly tasks according to the work instructions, this role requires precision, attention...Shift workWeekend work$19 - $21 per hour
Production AssemblerResponsible for performing a variety of tasks in the production of fuel cells and related components. Key duties include:Prepare and measure materials for batching and mixing using precision scalesOperate mechanical equipment and hand tools to carry...Contract workTemporary work$19 - $21 per hour
...Job Description Job Description Job Title: Production Assembler Pay Rate: $19-$21/hr (depending on experience) Open Shifts: ~1st (5am-3:30pm) Mon-Thurs ~2nd (2nd (2pm-12:30am) Mon-Thurs Job Duties: Responsible for performing a variety of tasks in...Weekly payContract workTemporary workWork at officeShift work$18 per hour
Looking for a dependable, hands-on role that offers ultimate flexibility and immediate weekly pay? Become an entry-level assembler / component handler! This role is perfect for those with little to no previous experience who are eager to learn basic manufacturing skills...Weekly payTemporary workWork experience placementImmediate startShift work$20 - $23 per hour
...spreadsheets WORK ENVIRONMENT :Cleanroom environment - this is a very clean, highly regulated environment. You will have your own assembly station within the manufacturing environment that is temperature controlled. LOCATION: Ann Arbor, MI 48108 SHIFTS AVAILABLE:...Weekly payContract workTemporary workWork at officeShift workAfternoon shift- ...equipment procedures. Select appropriate weld setting to obtain a quality weld. Cut and fabricate parts from raw stock material. Assemble and weld components for products. Use measuring tape and other tools. Operate all necessary equipment to assemble and weld components...
- NETA Field Service TechnicianJoin one of the nation's Best and Brightest Award-winning companies! If you're ready to be part of a winning team, we have exciting opportunities waiting for you. Make the change you've been looking for and experience the Team UIS difference...Apprenticeship
$20 per hour
...Job Description CRP is a 3rd-generation family-owned company that's been gong strong for more than 70 years! We are looking for Assembly Technicians for our facility in Ann Arbor. Assembly Technicians follow established processes to remanufacture automotive parts....Flexible hours$16.5 per hour
...Assembler Apply today! Assembly positions available now! Company Profile Our client is a premier diesel fuel filtration system provider. Delivering is believing: From engineering to customer service, our client is committed to delivering superior products and...Weekly payFull timeTemporary workMonday to FridayShift work- Fives Group is seeking an Assembly Technician Under general direction, perform the build, wire, plumb, and debug of mechanical and electrical components, and building custom automation systems, robotic cells, and large factory automation projects. Specific Responsibilities...
$19 - $21 per hour
...Job Title: Production Assembler Pay Rate: $19-$21/hr (depending on experience) Shift: 1st (5am-3:30pm) Mon-Thurs Job Duties: Responsible for performing a variety of tasks in the production of fuel cells and related components. Key duties include: Prepare...Weekly payContract workTemporary workShift work$16 per hour
If you excel at high-volume, repetitive assembly and need immediate contract income, this role is for you! We are urgently hiring assemblers / production assembly specialists for short-term mandates that offer reliable weekly pay and consistent access to work. Put your...Weekly payContract workTemporary workWork experience placementImmediate start- ...Southeast Michigan. FMI specializes in product design, engineering, development and manufacturing of tubular fabrication, welded tubular assemblies and fabricated exhaust manifolds. SUMMARY OF ROLE Weld metal components, products, assemblies and parts including but not...Temporary workLocal areaFlexible hoursWeekend work
$18.5 - $20 per hour
...Job Description Job Description Job Title: Cleanroom Assembler Job Description As a Cleanroom Technician, you will be responsible for setting up workstations by reading assembly instructions and gathering necessary parts, tools, and materials. You will assemble...Weekly payContract workTemporary workWork at officeWorldwide$75k
We are looking for subcontractors to install our LeafFilter Gutter Protection System! No experience is necessary, just a willingness to learn and possession of a truck or van, basic tools, and ladders. We pay weekly and per job every Friday. Average pay is $150-300+ ...Weekly payFull timePart timeFor subcontractorSecond jobImmediate startFlexible hours- Roadway Worker In Charge (RWIC) Roadway Worker In Charge (RWIC) Location: Ann Arbor, MI Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory...Hourly payFull timeTemporary workPart timeFor contractorsLong distance
$18.5 - $20 per hour
...Cleanroom AssemblerAs a Cleanroom Technician, you will be responsible for setting up workstations by reading assembly instructions and gathering necessary parts, tools, and materials. You will assemble subassemblies and finished products according to standardized work...Contract workTemporary workWorldwide- Medication Technician Make a Meaningful Impact at Pomeroy Living Pomeroy Living is a state-of-the-art assisted living community where compassion meets excellence. We are looking for dedicated Med Techs who prioritize resident wellness and clinical accuracy...Daily paidFlexible hours
$18.75 per hour
Job Position: MIG Welder - 1st Shift - Automotive Manufacturing (ID 218006) Location: Chelsea, MI 48118 Pay Rate: $18.75 per hour Shift: 1st Shift | Monday-Friday | 6:00 AM-2:00 PM Job Order ID: 218006 Start Your Welding Career with a Company That Offers...Hourly payWeekly payPermanent employmentFull timeTemporary workImmediate startMonday to FridayShift workDay shift- ...specifications to identify and mark component reference points and compute layout dimensions to build, and check custom work pieces and assemblies. Sets indicators on height gauge, protractor, and layout machines to computed dimensions. Uses measuring instruments such...InternshipFlexible hours
$18 - $19 per hour
Stick welder candidates for the Belleville Plant. We There are 3 openings, and the main requirement of potential welding candidates is to have at least one year of recent stick/arc/smaw welding experience. Starting pay is $18.00 - $19.00 per hour, temp to full-time, day...Hourly payFull timeTemporary workMonday to FridayDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Assembler. Be the first to apply!



