Welder
Department of the Navy - Agency Wide
Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Welder in Valley Forge, Montgomery County, PA vacancy
- ...careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The Welder is responsible for the prep, layout, tack, weld, test, complex...SuggestedShift work
- ...Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...TIG Welder Pay Rate: Negotiable based on experience and weld test Shift: Days Description: ~ We are seeking a skilled TIG (GTAW) Welder to produce and repair precision, thin-gauge stainless steel and titanium components used in demanding service environments...SuggestedTemporary workWork experience placementShift workDay shift
- ...weekends and holiday periods to meet business needs. Dorney Park is seeking a skilled and safety-focused Ride Mechanic / welder to perform inspections, maintenance, and repairs on our world-class rides and attractions. This hands-on role is perfect for mechanically...SuggestedFull timeShift workNight shift
- ...Job Description: Welder: Shift: 6 AM - 2:30 PM: Responsible for preparing and welding aftermarket custom exhaust components. Strong communication and math skills. Good interpersonal skills with the ability to communicate and interface positively with other...SuggestedLocal areaShift work
- ...Heritage Fence Company is looking for an Welder Fabricator to join our growing team! This role is a great opportunity for a detail-orientated individual with experience in the construction industry . We are celebrating 53 years in the Fencing industry and are focused...Hourly payFull timeTemporary workWork at officeWork visaFlexible hoursDay shift
- Mission Critical Group - EECOE is seeking a Metal Shop Technician - Welder to fabricate and assemble metal structures. The ideal candidate will operate MIG and TIG welders, interpret blueprints, and maintain safety standards in the manufacturing plant. Applicants should...Flexible hours
- Production Operator/ Assembler Join our dynamic team in our Assembly department where we assemble lawn and garden equipment! Responsibilities include: Assembles fabricated metal components, subassemblies, products, or systems, as specified by work orders, diagrams...Flexible hours
- Job Description Position Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...Local area
- Heritage Fence Company is seeking a Welder Fabricator to join our team in Skippack, PA. The role requires a detail-oriented individual with 5-7 years of experience in the construction industry. Ideal candidates will have strong welding skills (Stick, TIG & MIG), the ability...
- ...compliance and efficiency. Develop Welding Procedure Records (WPQRs) , Create Welding Procedure Specifications (WPSs), and maintain Welder Qualification Records (WQRs). Evaluate and resolve welding-related production issues to improve efficiency and reduce defects....Work at office
$21 - $24 per hour
Maintenance/Construction Technician Berger Communities is hiring a Construction Technician to support apartment renovations at Plymouth Pointe Apartments. This is a hands-on role where you'll be working on apartment upgradeseverything from demo to finishing touchesto...Temporary workFlexible hours- Job Description The Metal Shop Technician - Welder will fabricate and assemble metal structures and equipment using various welding techniques and tools. The ideal candidate should have experience reading blueprints, operating welding equipment, and maintaining safety...Hourly payLocal areaDay shift
- Mission Critical Group is looking for a Metal Shop Technician - Welder in Montgomery County, North Wales. This position involves fabricating and assembling metal structures using various welding techniques. Ideal candidates should have experience in reading blueprints...
$800 per month
Start Strong with Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800. Mavis Tires & Brakes at Discount Prices is seeking highly motivated Automotive Tire Technicians to join our team Mavis TODAY at our state-of-the-art automotive service...Hourly payWeekly payImmediate start- As a Building Mechanic, you will be responsible for operating, maintaining, and installing equipment used for operation within the GMP biopharmaceutical manufacturing facility This role will provide YOU the opportunity to lead key activities to progress YOUR career,...Local area
$30 per hour
ECOLAB in King of Prussia, PA is seeking a Maintenance Technician to perform preventative maintenance, safety checks, and repair tasks. This role is critical for ensuring equipment functionality and safety. Successful candidates will have at least 4 years of industrial...Night shift$30 - $45 per hour
Description This will be part-time, seasonal opportunity. Typically, 20-30 hours a week per client needs Do you have the expertise and drive to ensure the highest standards of safety and quality in the pipeline and welding inspection industry? We are looking for ...Hourly payPart timeFor contractorsSeasonal work- Job Description Job Description SHEET METAL INSTALLER - RESIDENTIAL NEW CONSTRUCTION Location - East Norriton, PA Sobieski New Homes of East Norriton, PA is looking to hire a full-time Residential New Construction Sheet Metal Installer. The successful Sheet...Full timeFor contractorsApprenticeshipLocal areaFlexible hours
- Position Overview The Maintenance Technician is a critical team member directly responsible for the repair, upkeep and preventative maintenance for an assigned group of Spotless Brands locations. This individual travels daily providing routine scheduled maintenance...ApprenticeshipLocal areaFlexible hoursNight shift
$10 per hour
Handyperson, Light Maintenance Join a fast-paced, growing, and exciting company full of great opportunities! Kellermeyer Bergensons Services (KBS) has immediate full-time, permanent openings for a Handyperson. If you enjoy working in a fast-paced environment and ...Hourly payPermanent employmentFull timePart timeLocal areaImmediate startShift work$30.51 per hour
Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity...Shift work- About Us We offer complete mechanical and facilities services, as well as energy solutions, mobile services, retrofits, and design-build services. Backed by cutting-edge technology, our proactive approach to addressing clients' most vital issues has enabled us to ...Seasonal workWork at officeImmediate startFlexible hoursShift work
$36 per hour
Neier Inc. in King of Prussia is seeking a Maintenance Mechanic to ensure peak operations of machinery. The role involves fabricating custom solutions, diagnosing complex systems, and repairing equipment using welding and metal-working tools. The ideal candidate will have...- GoTo Meeting is looking for a Maintenance Mechanic (1st Shift) in Oaks, PA. This role involves repairing and maintaining production machinery and equipment, ensuring efficient production processes. Qualified candidates should have a High School Diploma or GED and 2-plus...Day shift
- Operador de Produccin ( Production Associate ) en el area de King of Prussia Aplica o textea a Maycol al (***) ***-**** Horarios: Lunes a Viernes 7:00 am - 3:30 pm O 2:00 pm a 11:pm Oportunidad de Crecimiento Beneficios luego de los 30 das Paga semanal Responsabilidades ...Monday to Friday
- World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an Production Operator, you'll contribute to JM's mission as a world leader in sustainable technology, transforming energy...Night shiftAfternoon shift
- Certified Welding Inspector - CWI (Midwest USA) IL, IN, MO, KY Job Description Pennoni is currently seeking full-time and part-time AWS Certified Welding Inspectors for fabrication shops that produce bridge and highway products for transportation agencies located in the...Full timePart timeWork at office
$15.5 per hour
Join Our Team! Position: Production Operator L ocation: Ki ng of Prussia, PA Pay Rate: $15.50/hr Are you ready to take the next step in your career? We're actively seeking a dynamic and motivated Production Operator to join our team in King of Prussia, PA! ...Immediate startMonday to FridayShift work- Recycling Center Lead Maintenance Technician The Recycling Center Lead Maintenance Technician provides direction to a group of technicians to ensure that all repairs and maintenance of equipment are performed in compliance with the company's safety standards and applicable...Contract workTemporary workLocal area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder. Be the first to apply!



