Wastewater Operator
Cherokee Metropolitan District
Wastewater Operator
The Wastewater Operator reports to the Wastewater Supervisor/ORC. Perform unskilled and semi-skilled duties in the operation, sample collection, laboratory analysis, and maintenance of the water reclamation facility and of the collections system. This position must work well, independently or in group settings.
Essential Duties and Responsibilities
Operates Water Reclamation Facility and Related Facilities including:
- Operates facility to ensure compliance with state and federal regulations, the district's operating plan, and local policies and standards.
- Monitors effectiveness and efficiency of treatment processes. Makes recommendations for modifications based on facility performance. Modifies treatment parameters under delegation from the Operator in Responsible Charge as required.
- Maintains required documentation, transmits to State and Federal entities as applicable.
- Communicates changes in operating conditions and facility performance in accordance with established policies and procedures.
- Monitors/orders inventory of various chemicals, materials, equipment, and supplies required for treatment, and communicates order status to relevant staff.
- Maintains knowledge of industry best practices, regulations, and standards.
- Responds to collections and water reclamation facility related emergencies.
Maintains Water Reclamation Facility and Related Facilities including:
- Troubleshoots, maintains, and assists with maintenance of a variety of industrial equipment including pumps, motors, centrifuges, blowers, valves, and other mechanical and electrical devices at either the pump stations or the water reclamation facility.
- Maintains facilities, including but not limited to painting, plumbing, carpentry, landscaping, and general housekeeping.
- Makes recommendations on capital maintenance and capital construction projects.
- May oversee contractors commensurate with level of experience.
Monitors Water Quality including:
- Conducts monitoring and sampling at the facility, in waterways, and in the collection system.
- Performs and documents laboratory analysis in accordance with state and federal requirements, and District policies, procedures, and standards. Coordinates analysis by independent laboratories as needed.
- Maintains and calibrates laboratory equipment.
Other Duties and Responsibilities:
- Takes proper safety precautions, anticipates unsafe conditions, acts accordingly to prevent accidents.
- Serves as primary operator on a rotating basis, and as assigned.
- Willingness to learn the I & C (Instrument and Controls) aspect of operations and SCADA programming.
- Understand written documents such as: Safety Data Sheets, Operations and Maintenance Manual of the Facility, Colorado Regulations 100, Regulation 31 and 22, the discharge permit, and other industry regulations.
- On Call Rotations, including weekends and holidays to support 365-day operations.
- Must be willing to work overtime, holidays, and weekends.
Knowledge, Ability, Skills
- Beginner to Intermediate and even advanced process treatment (MBR Process) troubleshooting skills, RO (Reverse Osmosis) treatment troubleshooting skills, collections line maintenance skills (combo truck and video inspection), industrial pretreatment, along with adept mechanical repair and maintenance skills, and experience with hand and power tools for working on mechanical, plumbing, and electrical systems.
- Knowledge of chemistry, microbiology, laboratory testing procedures, and process control related mathematical calculations; experience with Supervisory Control and Data Acquisition systems (SCADA); computerized maintenance management software; Microsoft 365 suite (Word, Excel, Teams, Planner) and other programs; as well as general database reporting.
- Learn and apply department policies and procedures; report status of on-going projects to staff on a timely basis to ensure timelines are met and staff are informed; work independently, safely and execute judgment appropriately; communicate effectively both orally and in writing; review and analyze information and formulate logical recommendations.
Working Conditions/Physical Requirements
Work is performed both inside and outside the treatment facility, anywhere within the customer service area, and can be very physically demanding. Physical activities include heavy lifting; walking long distances; climbing and descending stairs, ladders, and steep terrain; using hand tools, power tools, lawn care equipment and snow removal equipment; operating District vehicles and heavy equipment.
Environmental factors would include exposure to: Weather conditions; loud noise; high humidity; odors; confined spaces; poor air quality; bio-hazardous aerosols; hazardous chemicals; rotating equipment; open tanks; electrical equipment and tripping hazards.
Certifications and Licenses
- Class D Wastewater Treatment certification or greater or the ability to obtain within 6 months of employment and Class 1 Collections certification or greater or the ability to obtain within 1 year of employment.
- Prefer Class B / A Colorado Commercial Driver's License or the ability to obtain one within a year.
Attractive Benefits Package
- 100% Employee medical, dental and vision coverage (choice of plans after 30 days).
- 75% Spouse and Dependent medical, dental and vision coverage (choice of plans after 30 days).
- 457 deferred compensation retirement plan with 8% company contribution, no employee match required.
- 30-day vesting.
- 13 paid holidays (On-call duties may require work during holidays, with pay).
- Paid vacation (accrual begins after 90 days).
- Paid sick leave (accrual begins upon start).
- Golf privileges for employee and immediate family members at the Cherokee Ridge Golf Course.
- Safety gear, including work boot allowance.
- Uniforms provided.
- Employer sponsored training and career development.
- Cherokee provides opportunities to grow professionally through development of technical knowledge and skills delivering challenging projects.
Additional Information
- FLSA Status: Non-Exempt.
- Supervisory Classification: No.
- Probationary Period: 90 days.
- ...expressways, bridges, underground utilities, dam construction, asphalt/concrete paving and water/wastewater treatment plants. Job Description The employee is responsible for operating heavy equipment used for moving or grading earth, applying concrete, asphalt or other...SuggestedTemporary work
$42.02 per hour
...Heavy Equipment Operator Please note that the starting pay rate for this position is $42.02/hr. followed by a pay rate increase to... ...equipment and trucks in support of water, natural gas, electric, and wastewater construction and maintenance activities, as well as special...SuggestedTemporary workTrial periodFlexible hours$35.76 per hour
...Heavy Equipment Operator Location: Colorado Springs, CO (United States Air Force Academy) Type: Non-Exempt Work Schedule: Full Time. On-call work may also be required based on operational needs. Compensation: $35.76 per hour Deadline: October 19, 2026...SuggestedHourly payFull timeTemporary workPart timeFor contractorsLocal areaFlexible hours- ...Required Attributes Knowledge on how to call in locates on job sites Basic understanding of construction and engineering to be able to operate machinery safely Basic understanding of hydraulics, electrical systems and other mechanical components to be able to troubleshoot...SuggestedWork at officeLocal area
$27 - $31 per hour
...Description JOB SUMMARY The Equipment Operator II is a mid-level role responsible for the safe and efficient operation of heavy mobile equipment and stationary plant machinery essential to asphalt production. The Equipment Operator II is expected to possess...SuggestedFull timeTemporary workPart timeWork experience placementLocal areaWorldwideFlexible hoursShift work$35.76 per hour
...Colorado Springs, Colorado (USAF Academy) Part time R0006894 Heavy Equipment Operator (Snow Removal Operations) Location: Colorado Springs, CO (United States Air Force Academy) Type: Non-Exempt Work Schedule: Part-Time, On-Call Compensation: $35.76 per...Hourly payPart timeFor contractorsLocal area$95 per hour
Heavy Equipment Operators - $95 Per Diem - Up to $79,959/year - Colorado Springs, CO Heavy Equipment Operators are needed by Tepa Companies for construction projects based in Colorado Springs, with potential travel to surrounding states. Operators will handle a variety...Daily paidTemporary workFlexible hours$24.42 - $37.89 per hour
...per hour + per diem for travelers 95+ miles from the job site. ABOUT THE JOB The Tepa Companies are seeking Heavy Equipment Operators to perform various equipment operating activities on active construction sites. Job Functions: Operates various construction...Hourly payDaily paidTemporary workLocal areaFlexible hours- ...6/hr Schedule: 1 First shift position 1 Second shift position - (2:30 – 11:15pm)Job Description Summary Essential Responsibilities:Operate cold saw and automated band sawStock and identify all incoming cell raw materialCut incoming raw material to size per orderMaintain...Second jobImmediate startDay shiftAfternoon shift
- ...compensation and great benefits. It's all here and it's exactly what going further is all about. Position Summary Operates various tractor trailer combinations over long distances to deliver freight in a safe, claims-free, and cost-efficient manner....Local areaLong distanceFlexible hoursNight shift
$24 - $32 per hour
...Jet Truck Vactor Operator $24-32/hr. + $1,000 Bonus after 180 days. Bonus Structure & Full Benefits Package. PURIS operates across... ...Companies provide trenchless renewal solutions in the water, wastewater and stormwater markets. Our environmentally friendly solutions...Temporary workLocal area- ...supportive, rewarding work environment where every team member plays a critical role in our shared success. TRAVELING HEAVY EQUIPMENT OPERATOR We are seeking an experienced heavy equipment operator who is willing to travel based on business needs and project schedules....For contractorsFlexible hoursNight shiftWeekend work
$12 - $16 per hour
...6/hr Schedule 1 First shift position 1 Second shift position - (2:30 - 11:15pm) Job Description Summary Essential Responsibilities Operate cold saw and automated band saw Stock and identify all incoming cell raw material Cut incoming raw material to size per order Maintain...Immediate startDay shiftAfternoon shift- ...to transition concepts into reality, performing design-for-manufacturability (DFM) assessments. CNC Mastery: Program, set up, and operate CNC machinery, ensuring optimal tool paths and efficiency. Metrology & Quality: Conduct high-level precision inspections and metrology...
$17 - $20 per hour
...You notice the small things and take pride in "doing it right the first time." Process-Driven: You enjoy following standard operating procedures (SOPs) and finding ways to work more efficiently. Reliable: You show up ready to work and can be counted on by your...Hourly payFull timeImmediate start$20 - $25 per hour
...CNC Machine Operator September 23, 2026 Located in Colorado Springs, CO Pay: $$20.00-$25.00 p.h. DOE Job Full Description Express Employment Professionals is seeking a CNC Operator to join our team. The ideal candidate will have experience operating CNC machines and general...- Job TitleSome U.S. state privacy laws offer their residents specific consumer privacy rights, which we respect as described in our privacy statement. To opt-out of our making available to third parties information relating to cookies and similar technologies for advertising...
- ...diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our...Worldwide
- ...utilities, dam construction, asphalt/concrete paving and water/wastewater treatment plants. Job Description The incumbent will be... ...materials including wood and steel. The incumbent will need to operate in a safe and efficient manner following all personal...
- ...edge, medication equipment to customers worldwide. Our manufacturing locations are growing, and we are seeking talented Machine Operators to help build a positive, yet hardworking culture that meets company quality standards for our Canal Winchester, OH manufacturing...Full timeWorldwide
$20 per hour
Semiconductor Machine Operator Pay: $20.00/hour Schedule: Full-Time | Compressed Work Week (3-4 Days per Week) Shifts Available: Day Shift: 7:00 AM - 7:00 PM Night Shift: 7:00 PM - 7:00 AM Build the Technology That Powers Tomorrow We are seeking motivated Semiconductor...Weekly payFull timeContract workTemporary workShift workNight shiftDay shift3 days per week$19 - $21 per hour
Responsibilities Setting up and operating equipment for production processes. Monitoring controls, adjusting settings, and performing maintenance. Ensuring adherence to specifications and safety procedures. Collaborating with teams to support successful implementation...Hourly pay$20.25 per hour
...Description Position at Samtec, Inc Samtec is seeking a Manufacturing Production Operator to work in our Optical Engine assembly area in our Colorado Springs, Colorado location. This is a second - shift position, working Monday through Friday from 2:30 PM...Hourly payTemporary workMonday to FridayShift workAfternoon shift$22 - $30 per hour
...position will help Markit! execute various forestry projects and be responsible for assisting in the proper maintenance, preparation and operation of all tools and equipment including hand tools, chainsaws, chippers, and heavy machinery. This position will report to and work...Hourly payDaily paidFull timeTemporary workNight shift- Ensuring the required materials are available for production, and that the factory is safe for all workers. Inspecting machinery and reporting any faults to management and workers. Identifying faults and troubleshooting wherever possible. Analyzing performance and products...
- ...Production Worker High School Diploma. 0 years of relevant assembly experience required. Ability to read and understand English. Ability to operate hand tools, electrical tools, hand cutters, measuring equipment, and light equipment. Ability to read blueprints with some...Contract workDay shift
$17 - $21 per hour
...is an entry-level position that assembles aircraft products under direct supervision and performs routine and repetitive assembly operations and processes. Essential Responsibilities Under direct supervision, assembles components by examining connections for correct...- ...manufacturing leader in the local area as an Expert-Level CNC Milling Machinist! In this high-impact role, you will independently set up, operate, and optimize complex 3- and 5-axis CNC machines to craft high-precision components with ultra-tight tolerances. Responsibilities...Temporary workApprenticeshipWork experience placementLocal area
$25 - $32 per hour
...producing quality parts, we want to hear from you! Location: Colorado Springs, CO Pay: $25-32/hourKey Responsibilities:Set up and operate CNC machines to manufacture precision parts.Read and interpret customer and internal engineering drawings.Measure finished parts to...Shift work$25 - $33 per hour
...blueprints, and 3D solid models. Utilize SolidWorks models and file packages to generate CNC programs for punch press and press brake operations. Improve manufacturing efficiency by reducing setup, punching, and bending cycle times. Manage tooling selection,...Hourly payPermanent employmentFull timeTemporary workMonday to FridayShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Wastewater Operator. Be the first to apply!
- swimming pool operator Colorado Springs, CO
- data operator Colorado Springs, CO
- hotel operator Colorado Springs, CO
- systems operator Colorado Springs, CO
- cashier phone operator Colorado Springs, CO
- list operator Colorado Springs, CO
- call center operator Colorado Springs, CO
- operator unilever Colorado Springs, CO
- line operator Colorado Springs, CO
- test operator Colorado Springs, CO

