Welder/Diver
Phoenix International Holdings Inc
Job Description
SUMMARY DESCRIPTION:
The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor.
CLASSIFICATION: Non-Exempt (hourly)
DUTIES AND RESPONSIBILITIES:
- Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor.
- Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations.
- Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements.
- Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data.
- Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation.
- Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive.
- Immediately report all symptoms or suspected symptoms as early and accurately as possible.
- Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation.
- Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others.
- Assist in the training of new personnel or tenders.
- Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits.
- Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site.
- Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others.
- Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance.
- Ensure their medical certificates are up to date and recorded in their logbook.
- Present their logbook to the Diving Supervisor on every job.
- Maintain current certification in first aid and CPR.
- Complete administrative office duties as assigned.
JOB REQUIREMENTS:
- Graduate of a professional diving school.
- Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability.
- Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld).
- Significant physical effort required. Significant exposure to physical risk.
- Ability to pass annual diving physical.
- Ability to obtain a U.S. Government security clearance.
- Able and willing, to travel worldwide, on short notice for indefinite periods of time.
Ability to pass a pre-employment drug/alcohol screen and physical, as required.
Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status
- ...Job Description Job Description Labor One is hiring Journey-Level Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (***) ***-**** ; (***) ***-**** or (***) ***-**** *...SuggestedPermanent employmentWork at officeLocal areaImmediate startShift workAfternoon shift
- ...Pipe Welder Labor One is hiring pipe welders for a project in San Diego, California. Shipyard experience is required. Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according...SuggestedLocal areaShift work
$39.1 - $42.45 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according to specifications...SuggestedHourly payLocal areaFlexible hoursShift work- ...Job Description Job Description JOB DESCRIPTION SUMMARY/OBJECTIVE The Welder Journeyman Welds fabricated steel components to assemble structural forms in the assembly and production of Navy ship repair and other marine and commercial equipment. Welder Journeyman...SuggestedShift work
- ...Job Description Job Description We are looking for a detail-oriented, outgoing, dependable Marine Welder for an established Marine and Industrial Repair Company. Qualified applicants will be tested on their skill level and scheduled to be interviewed at our office...SuggestedWork at office
- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$25 - $35 per hour
...layoff, recall, transfer, leave of absence, compensation, and training. Description ARMADA INC. POSITION DESCRIPTION TITLE: Welder REPORTS TO: Superintendent FLSA STATUS: Non-Exempt PAY RANGE: $25.00-$35.00 per hour DOE FT / PT STATUS: Full Time...Hourly payDaily paidFull timeFor contractorsLocal area$40.86 per hour
...pass full penetration joint details, for all joint and material thickness configurations May instruct and mentor less-skilled welders, as assigned Works with a sense of urgency, efficiency and productive out put Maintains safe work practices and adheres to safety...Hourly payContract workTemporary workApprenticeshipLocal areaFlexible hoursShift work$37.34 - $40.69 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks...Hourly payLocal areaFlexible hoursShift work- Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and...Relocation
- ...Job Description Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (***) ***-**** ; (***) ***-**** or (***) ***-****...Permanent employmentWork at officeLocal areaImmediate startShift work
$29.31 - $43.97 per hour
...Welder III Location: National City, CA Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations...Hourly payNight shift$31 - $35 per hour
...location. Position Location: Chula Vista, CA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old...Hourly payTemporary work- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and...Relocation
- Welding PositionThe general purpose of this position is to weld simple to complex components and/or structures while meeting all safety, quality, and schedule requirements. Responsible for various types of weld preparation, welding, and weld finishing operations to accomplish...Shift work
- 1st Class Structural Welder - Flux CoreLabor One Marine & Industrial Services is looking to hire a 1st Class Structural Welder - Flux core. This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural...Permanent employmentShift work
$27 - $30 per hour
...location. Position Location: Chula Vista, CA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old...Hourly payTemporary work- Job Title The general purpose of this position is to layout and weld simple to complex components and/or structures while meeting all safety, quality, and schedule requirements. Essential Duties and Responsibilities Lay out, positions, and secures parts and...Shift work
- Job Description Job Description SUMMARY/OBJECTIVE The Pipe Welder assists pipefitters with fit-up of piping systems, accomplishes welding piping onboard ship and shop fabrication for P-1 piping including working off and entering data into PCP’s. Welding needs to pass...
- ...Diver/Tender Diver/Tender is an entry-level diver, required to perform maintenance on diving and diving support equipment as they develop the skills required by all divers. This position is expected to work 8 hours in our facility and 12+ hours when deployed or on remote...Hourly payWork at officeImmediate startRemote workWorldwideShift work
$20 - $25 per hour
...Job Description Job Description TIG Welder - Naval Base San Diego - 1st Shift Job Description ~ This role focuses on TIG welding aluminum structures aboard vessels. You will perform precision welding in overhead positions and within confined spaces aboard a naval...Weekly payContract workTemporary workDay shift- ...application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Pipe Welder Journeyman Pipe San Diego, CA, US 9 days ago Requisition ID: 1877 Who We Are Vigor Marine CM San Diego, a Vigor Marine Group...For contractorsShift work
$160 per hour
...Pipe Welder Labor One is currently hiring pipe welders in San Diego, CA at a shipyard.$160 per diem, if eligible. Job requirements: Three years of experience in welding Knowledge of welding procedures and various types of welding equipment Proficient in flat, vertical...Daily paidCurrently hiringShift work- ...Job Description Job Description WELDER/FABRICATOR Job descriptionAbout us We are professional, agile and our goal is to established a solid reputation for quality utilizing state-of-the-art technology in the sheet metal fabrication industry since 1969. Specializing...Full timeApprenticeship
- ...CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has multiple positions open for Welder Journeyman , with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is...For contractorsShift work
- ...Job Description Job Description Structural Welder Full Job Description ~ Gap plate test in G2 through G4 positions. ~ Welders must show they can confidently set up welding rigs. ~ Flux core test, core pass and layers. ~ Must show they can start...
$29.31 - $43.97 per hour
...candidates will be considered. Veteran and retired candidates welcome! Job Overview We are seeking a highly skilled and experienced Welder III to join our team in National City, CA. This position is responsible for performing complex welding tasks in support of ship...Hourly payFor contractorsFor subcontractorLocal areaNight shift$25 - $35 per hour
...promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. ARMADA INC. POSITION DESCRIPTION TITLE: Welder REPORTS TO: Superintendent FLSA STATUS: Non-Exempt PAY RANGE: $25.00-$35.00 per hour DOE FT / PT STATUS: Full Time LOCATION: This...Hourly payDaily paidFull timeFor contractorsLocal area- ...relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Tank Builder / Welder (Nationwide) Day to Day Duties: ~ Performing arc and torch cutting and gouging. ~ Using generators, compressors, tuggers,...Full timeCurrently hiring
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder/Diver. Be the first to apply!
- welder fabricator Chula Vista, CA
- maintenance welder Chula Vista, CA
- welder welding Chula Vista, CA
- plant welder Chula Vista, CA
- welder fitter Chula Vista, CA
- navy welder Chula Vista, CA
- structural welder Chula Vista, CA
- steel fabricator Chula Vista, CA
- construction welder Chula Vista, CA
- welder Chula Vista, CA



