Repair and Tool Technician
The Home Depot
Repair and Tool Technician | Home DepotPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.Location: RiversideState: CAAuto req ID_BR: 87096BRJob Type: Store Repair and Tool TechnicianAuto req ID: 200085958Pay Range: $24.00
$23 per hour
...Job Description Position Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians...SuggestedLocal area$24 per hour
...years of CNC machining experience or equivalent educationExperience operating CNC mills and lathesExperience with machine setups, tooling changes, and fixture adjustmentsKnowledge of shop arithmetic, GD&T, blueprint reading, and machining processesAbility to use precision...SuggestedHourly payShift work$39 - $44 per hour
...opportunities; combined with benefits of a large company's scale, tools, expertise, and financial strength with Dover. Join PSG, a... ...machines simultaneously Responsible for troubleshooting, minor repairs, and preventative maintenance in the department Seeking continuous...SuggestedHourly payTemporary workWork experience placementLocal areaFlexible hours- ...process checks and precision inspectionsReading and interpreting blueprints, routers, and set-up sheetsMaking offsets, edge-breaking, and tool checks as neededCommunicating issues and improvement ideas to supervisorsMaintaining clean, organized workspaces and following...SuggestedShift work
$25.13 - $53.69 per hour
...sub-assemblies, assemblies, and installations, development parts and assemblies, vendor manufactured parts, materials, all types of tooling, master gages, master models and development parts, etc., for workmanship, dimensional accuracy, and interchangeability.Sets up and...SuggestedWork experience placementWork at officeRemote workShift workNight shift$25.13 - $53.69 per hour
...sub-assemblies, assemblies, and installations, development parts and assemblies, vendor manufactured parts, materials, all types of tooling, master gages, master models and development parts, etc., for workmanship, dimensional accuracy, and interchangeability.Sets up and...Work experience placementWork at officeRemote workMonday to FridayAfternoon shift$25.13 - $53.69 per hour
...sub-assemblies, assemblies, and installations, development parts and assemblies, vendor manufactured parts, materials, all types of tooling, master gages, master models and development parts, etc., for workmanship, dimensional accuracy, and interchangeability. Sets up...Permanent employmentTemporary workWork experience placementWork at officeRemote workMonday to FridayFlexible hoursAfternoon shift- ...metals and exotic materials Understand how to read blueprints Instruct machines to cut mill drill etc. through written code or using software Tooling and setup for machines, operation, and first piece inspection Skill with various precise measuring equipment...
- ...manufacturer's instructions; troubleshooting malfunctions; calling for repairs. 12. Maintains safe and clean working environment by complying... ...Experience, Manufacturing Quality, Mechanical Inspection Tools, Tooling, Safety Management, Quality Focus, Power Tools, Judgment...
- Description Load and operate Computer numerical control (CNC) machines and machining centers to fabricate metallic and nonmetallic parts by performing the following duties Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions...
- A leading manufacturing company in Riverside, California, is seeking a skilled CNC Machine Operator to load and operate CNC machines and machining centers. This role requires reading blueprints, performing precise measurements, and conducting machine maintenance. The ideal...
$23.1 per hour
...Wheel Technician Dent Wizard is the nation's undisputed leader in automotive reconditioning... ...in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled... ...vehicles Use grinding and sanding tools to repair cosmetic damages (curb and road...- ...specificationsTravel to customers for on site training and engineering assistanceExperience in Sliding Headstock (Swiss) CNC machine tool related engineering and manufacturingPossessing and maintaining an in-depth knowledge of machine tool industry and product lines...
- ...specificationsTravel to customers for on site training and engineering assistanceExperience in Sliding Headstock (Swiss) CNC machine tool related engineering and manufacturingPossessing and maintaining an in-depth knowledge of machine tool industry and product lines...
- ...Commercial Tire Service Technician Position Title: Commercial Tire Service Technician... ...Technician is responsible for the inspection, repair, replacement, mounting, balancing, and servicing... ...Ability to safely operate jacks, air tools, compressors, and heavy equipment Must...Night shift
$23.38 - $34.04 per hour
...pull, lift, 10 lbs. and occasionally lift and/or move up to 50lbs.Receive set up information from Engineering department and prepare tools and fixtures per Engineering instructionProof out and fine tune the programs to provide acceptable first article partsEliminate any...Local areaShift work- ...Shift positions for our Corona, CA location. Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work...Permanent employmentFor contractorsWork experience placementWork at officeMonday to FridayShift workDay shiftAfternoon shift
- ...Shift positions for our Corona, CA location. Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work...Permanent employmentFor contractorsWork experience placementWork at officeMonday to FridayShift workDay shiftAfternoon shift
$24 - $26 per hour
Corona, CA Order: 351260 Order Type : Temp SkillSetGroup is seeking a CNC Mill Setup/Operator to work in the Corona, CA area. This position will be working setting up and operating 3-5 axis CNC machines. Ideal candidate must be able to read/...Contract workTemporary workShift workDay shiftAfternoon shift- ...meet precise mission requirements. The CNC Machinist supports production operations on second‑shift weekend schedules by preparing tooling and materials, coordinating efficient CNC machine setups, and producing high‑precision components. The role partners closely with...Permanent employmentTemporary workFor contractorsWork experience placementMonday to FridayFlexible hoursWeekend workAfternoon shift
$25 - $35 per hour
.... This is a hands-on role for someone who understands setups, tooling, and process optimization, not just operation. Top Skills /... ...(Search Optimization) CNC Lathe Setup Machinist, CNC Setup Technician, CNC Machinist, Lathe Setup, G-Code, Fanuc Controls, Multi-Axis...Hourly payFull timeDay shiftAfternoon shift- ...cutting strategies, and risk mitigation Lead prove-outs, first-article runs, and process qualifications Optimize cycle time, tool life, surface finish, and process capability Machining & Setup Execution Independently set up and run complex jobs on CNC mills...
- ...Job Description Job Description ~ Sets up, adjusts, or operates basic or specialized machine tools used to perform precision machining operations. ~ Aligns and secures holding fixtures, cutting tools, attachments, accessories, or materials onto machines. ~ Measures...Immediate start
$17 - $24 per hour
...Job TitlePerforms all automotive tire repairs, changes, balancing, rotations and TPMS procedures. Great growth and career opportunities... ...graduate, comparable vocational training or 6 months of tire technician experienceMust have knowledge of non-technical tire and auto...$20 - $24 per hour
...assembly of fabricated sheet metal products using hand, and power tools to ensure a smooth surface while inspecting products for flaws... ...cleaning, sanding, and applying finishes as required. Identify and repair any imperfections on the material (parts) prior to any outside...Permanent employmentFull timeWork at officeMonday to Friday- ...Description Tire Technician We're a results-focused, performance-driven team that knows how to deliver. Every role here plays... ...Technicians: Mount, dismount, balance, and rotate tires Repair flats and inflate to spec Test, replace, register, and reset...Hourly payFlexible hours
$19.06 - $25.73 per hour
Press Brake OperatorCrown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses...Visa sponsorshipFlexible hours$21.61 - $29.18 per hour
Press Brake OperatorTo support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Press Brake Operator in USA Fontana, Ca.Report to the Production Manager, the Press Brake Operator, is responsible for operating a press...Visa sponsorshipFlexible hours- Job Description Job Description CNC Mill or Lathe setup operator Must have 5 yrs. Exp. in the aerospace industry operating CNC Lathes. Inconel experience is a plus. SETTING UP. Lathes is a must. (Monday - Friday) 5:30 AM - 2:00 PM \nCompany Description ...Monday to Friday
- ...Daniels Tire Service is seeking Tire Technicians for the Yard and Pad. Responsibilities include... ..., maintenance, installation, and repair of tires for a variety of vehicles and equipment... ...and procedures when handling tires, tools, and equipment. Maintain a clean and...Monday to Friday
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!
- skilled maintenance technician Riverside, CA
- preventive maintenance technician Riverside, CA
- hotel maintenance technician Riverside, CA
- i & e maintenance technician Riverside, CA
- computer repair tech Riverside, CA
- hospital maintenance mechanic Riverside, CA
- community maintenance technician Riverside, CA
- maintenance technician Riverside, CA
- maintenance technician direct hire Riverside, CA
- pool repair technician Riverside, CA


