Paint Prep Technician

Brief Description The Review checklist and follow work order instructions to ensure compliance with specifications Assess units prior to painting and check for issues (defects, leaks, etc.), elevate defect issues to lead or supervisor if discovered Mix paint and ensure the viscosity is consistent with specifications As needed replace paint in pots/drums Ensure paint guns are all in working order and spray pattern consistency is correct prior to painting the equipment If needed clean unit off accordingly by air or tack cloth Apply primer and paint as required to comply with quality expectations After primer and paint is complete look over unit to ensure quality expectations are met If unit is dissembled spray unit parts as required Once unit is complete move to final assembly Following all safety protocols which includes wearing appropriate personal protective equipment (PPE), respirator, glove, safety glasses, etc. Maintain safe, clean and orderly workstation and area. Other duties assigned as needed. Brief Description Review checklist and follow work order instructions to ensure compliance with specifications Assess units prior to painting and check for issues (defects, leaks, etc.), elevate defect issues to lead or supervisor if discovered Mix paint and ensure the viscosity is consistent with specifications As needed replace paint in pots/drums Ensure paint guns are all in working order and spray pattern consistency is correct prior to painting the equipment If needed clean unit off accordingly by air or tack cloth Apply primer and paint as required to comply with quality expectations After primer and paint is complete look over unit to ensure quality expectations are met If unit is dissembled spray unit parts as required Once unit is complete move to final assembly Following all safety protocols which includes wearing appropriate personal protective equipment (PPE), respirator, glove, safety glasses, etc. Maintain safe, clean and orderly workstation and area. Other duties assigned as needed. Requirements High School or GED preferred OSHA10 certified, preferred 1 year experience in paint manufacturing, preferred 1 year experience material handling equipment (forklift, crane, etc.), preferred Knowledge of basic hand tools preferred A proven track record in safety excellence is required. Adheres to all safety and environmental compliance regulations set by the organization. Notify management immediately of any safety concerns, hazardous conditions, or injuries. Ability to read and interpret work orders. Meet department and production goals set by supervisor. Ensure product quality meets company and client expectations. Possess a strong work ethic, excellent communication skills, problem-solving abilities, cooperative attitude, strong attention to detail and can work in a team environment. Adheres to the company’s employee handbook policies and embodies the organization’s core values. Ability to learn other department job functions and fill in as needed. Complete company compliance and safety training when required. Ability to work a flexible schedule and work under pressure in a fast-paced work environment. Physical requirements for this role include, but are not limited to the following: Safety protocols require the completion and passing of a respiratory fit test Lift 50lbs floor to waist and waist to shoulder multiple times Standing and walking for long durations Bending, squatting, and kneeling multiple times for long durations The ability to climb up and down a ladder multiple times Balance and stand on a ladder with three points of contact for extended periods of time Comfortable working in the heat and cold due to manufacturing facilities not being climate controlled. Summary Where Potential Powers Progress At Sunbelt Solomon, we believe progress starts with people — their ideas, their expertise, and their drive to make energy work better. With more than a century of combined experience, we deliver full-lifecycle power, energy, and automation solutions across the Americas. From our 40+ locations and a team of over 1,700 skilled professionals, we serve nearly every industry with the people, products, and insight needed to keep the electricity running. Our solutions span low-, medium-, and high-voltage systems, covering the complete electrical lifecycle, from design and engineering to operation, maintenance, modernization, and sustainable decommissioning. We’re known for our expertise in remanufacturing electrical equipment, including transformers and switchgear, and for providing flexible, reliable temporary power rental solutions. Through the Sunbelt Solomon family of brands, including Trinity Power, Magna IV Engineering, and Power Solutions Group, we combine deep technical field experience with advanced engineering and turnkey project delivery. Together, we help customers optimize performance, extend asset life, and achieve sustainability goals while building a more resilient, efficient energy future. At our core, we’re powered by people — innovators, engineers, technicians, and problem solvers — all working together to deliver energy solutions that move industries forward. Mission, Purpose, Vision & Core Values Mission: Through a culture of integrity, bold innovation, and customer-centricity we create value for our partners and team members with safe and reliable electrical power solutions and services. Purpose: To enhance the lives of our team members and partners through sustainable products and services in the communities we serve. Vision: To be the leading provider of customized electrical power solutions and services. Core Values People: The core of our success. Safety: It’s in our DNA. Strategic: We forge our own future. Sustainability: Industry leaders in power distribution life cycle management. Performance: Delivering excellence at every opportunity. Company Benefits Sunbelt Solomon offers a comprehensive, highly competitive benefits package to employees who meet applicable plan eligibility requirements. Benefits include but are not limited to medical, dental, vision, FSA/HSA, 401k with company match, life insurance and disability, paid vacation, sick time, and holiday. Temp employees are not eligible for company benefits. Equal Employment Opportunity All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Pre-Employment Screening Following an offer of employment all candidates are required to complete a background check and drug screen prior to being cleared to start employment. A physical, respiratory fit test, and/or Motor Vehicle Record check may also be required based on the job responsibilities and location of the position. #J-18808-Ljbffr