Industrial Engineer
Waskey
Description JOB SUMMARY The Industrial Engineer is responsible for analyzing, developing, and improving manufacturing processes, production workflows, and operational systems to maximize efficiency, productivity, quality, and cost-effectiveness within the Company's precast concrete manufacturing operations. This position evaluates production methods, labor utilization, equipment performance, material flow, and facility layouts to identify opportunities for continuous improvement and operational excellence. The Industrial Engineer works collaboratively with Production, Operations, Engineering, Scheduling, Quality Control and Safety to implement practical solutions that reduce waste, improve resource utilization, minimize downtime, and support production schedules and business objectives. The Industrial Engineer reports to the Operations Manager. DUTIES & RESPONSIBILITIES Process Improvement & Operational Efficiency • Analyze existing manufacturing processes, production workflows, and operational procedures to identify inefficiencies, bottlenecks, and opportunities for improvement. • Develop and implement process improvements to increase productivity, reduce waste, improve quality, and optimize overall manufacturing performance. • Conduct time studies, work measurement analyses, and process evaluations to establish production standards and identify opportunities for improved labor and equipment utilization. • Evaluate production processes, including form preparation, reinforcement placement, concrete batching, pouring, curing, stripping, finishing, and material handling. • Develop and recommend standardized work procedures and best practices to improve consistency, efficiency, and overall production performance. • Apply Lean Manufacturing, Six Sigma, and other continuous improvement methodologies to streamline operations and eliminate non-value-added activities. • Identify root causes of production inefficiencies and recurring operational issues and implement sustainable corrective actions. Production Planning & Resource Optimization • Evaluate production capacity, labor requirements, equipment utilization, and material flow to support efficient production planning and scheduling. • Analyze manpower allocation, crew productivity, and production cycle times to identify opportunities for improved resource utilization. • Collaborate with Production and Scheduling to improve workflow, reduce production delays, and optimize manufacturing schedules. • Assess equipment capabilities, production constraints, and facility capacity to support operational planning and future growth. • Develop and recommend improvements to production layouts, workstations, material staging areas, and equipment placement to maximize efficiency and minimize unnecessary movement. • Assist in evaluating staffing levels, labor standards, and production methods to support operational and financial objectives. Data Analysis & Performance Measurement • Collect, analyze, and interpret production data to evaluate operational performance and identify trends. • Develop and maintain key performance indicators (KPIs) related to productivity, labor efficiency, production cycle times, equipment utilization, downtime, material waste, and manufacturing costs. • Prepare reports, dashboards, and performance analyses to communicate findings and improvement opportunities to management. • Establish measurable performance benchmarks and monitor the effectiveness of implemented process improvements. • Analyze production variances and recommend corrective actions to improve performance and cost control. • Utilize data-driven methods to support operational decisions, capital investments, and long-term business planning. Manufacturing Systems & Continuous Improvement • Evaluate and improve manufacturing systems, equipment utilization, and material handling processes to support safe and efficient operations. • Collaborate with Engineering and Production teams to improve manufacturing methods, formwork processes, and production sequencing. • Identify opportunities for automation, equipment upgrades, and technology improvements that enhance productivity and operational reliability. • Assist with the evaluation, implementation, and optimization of manufacturing software, production tracking systems, and other operational technologies. • Support the development and implementation of standard operating procedures (SOPs), work instructions, and process documentation. • Lead or participate in continuous improvement initiatives involving multiple departments to improve overall operational performance. • Evaluate proposed process changes for feasibility, cost-effectiveness, safety, and impact on production. Cost Analysis & Project Management • Analyze manufacturing costs, including labor, materials, equipment utilization, and production inefficiencies, to identify cost-reduction opportunities. • Conduct cost-benefit analyses and return-on-investment evaluations for proposed process improvements, equipment purchases, and capital projects. • Develop project plans, timelines, budgets, and performance objectives for assigned improvement initiatives. • Coordinate improvement projects with internal departments, vendors, and contractors to ensure successful implementation. • Monitor project progress, measure results, and communicate updates and recommendations to management. • Support budgeting and operational planning through analysis of production costs, capacity, and resource requirements. Quality, Safety & Cross-Functional Collaboration • Partner with Quality Control to identify and address process-related defects, rework, and production inconsistencies. • Evaluate manufacturing processes to ensure improvements support established quality standards and customer requirements. • Collaborate with Safety to identify operational hazards and incorporate safe work practices, ergonomic principles, and risk reduction into process improvements. • Work closely with Production supervisors and employees to understand operational challenges and develop practical, sustainable solutions. • Provide guidance and training to employees and supervisors on improved processes, standardized work methods, and operational best practices. • Communicate findings, recommendations, and improvement initiatives clearly to management and affected departments. • Perform other duties as assigned to support the Company's operational needs. SKILLS & ABILITIES
• Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or a related engineering discipline required. • Previous experience in industrial engineering, manufacturing process improvement, production operations, or a related field preferred. • Experience in precast concrete manufacturing, heavy industrial manufacturing, construction materials, or similar production environments preferred. • Strong understanding of manufacturing processes, production planning, workflow optimization, and resource utilization. • Knowledge of Lean Manufacturing, Six Sigma, continuous improvement methodologies, and root cause analysis. • Experience conducting time studies, process mapping, capacity analyses, and labor productivity evaluations. • Strong analytical, mathematical, organizational, and problem-solving skills. • Ability to interpret production data, develop performance metrics, and make data-driven recommendations. • Proficiency in Microsoft Office applications, particularly Excel, and familiarity with data analysis and reporting tools. • Experience with production management software, or other manufacturing technologies preferred. • Strong project management skills with the ability to manage multiple priorities and improvement initiatives. • Strong communication and interpersonal skills with the ability to collaborate effectively across departments and organizational levels. • Excellent organizational, planning, leadership, problem-solving, and decision-making skills with strong attention to detail. • Ability to work independently or collaboratively, exercise sound judgment, and develop practical solutions in a fast-paced manufacturing environment. • Self-motivated, adaptable, and flexible to changing priorities and operational needs. • Working knowledge of applicable industrial safety standards and manufacturing quality requirements. FUNCTIONAL REQUIREMENTS This position requires frequent (40-69%) standing, walking, bending, stooping, reaching, climbing, balancing, and navigating active manufacturing facilities and outdoor production yards. Occasional (0-39%) sitting, kneeling, crouching, crawling, reaching, handling, feeling, use of hands/fingers, hearing (listening), observing (vision), hand/eye coordination, twisting, pushing, pulling, and lifting up to 50lbs may be required. Duties involve inspecting facilities, machinery, equipment, and infrastructure; supervising maintenance activities; and coordinating repairs and improvement projects. Must possess the ability to safely navigate ladders, elevated platforms, uneven or unimproved surfaces, muddy conditions, loose rock, and other industrial environments. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Adequate hearing, hand-eye coordination, and manual dexterity are required to inspect equipment, identify hazards, and perform job-related tasks. This position is subject to industrial hazards, including but not limited to moving machinery, overhead cranes, mobile equipment, hazardous energy sources (LOTO), elevated work areas, electrical and mechanical systems, and high noise levels. May require the use of hand and power tools and occasional entry into confined spaces in accordance with applicable safety procedures. Work is performed in both indoor and outdoor environments with exposure to dust, noise, vibration, and adverse weather conditions, including heat, cold, and rain. Must be able to wear required personal protective equipment (PPE) and comply with all Company safety policies and procedures. Must be able to walk on uneven surfaces, muddy conditions, loose rock, loose/soft sand, etc. Will be exposed to adverse weather conditions (heat, cold, rain, etc.). Candidate must be able to be medically qualified by a NON-DOT or other job specific physical. May be required to respond to facility or equipment emergencies outside normal working hours. Must be able to perform the essential functions of the position, with or without reasonable accommodation and meet any applicable job-related medical qualification requirements.
BENEFITS All full-time employees who work a minimum average of 30 hours per week are eligible for health & wellness and ancillary benefits. Waskey Bridges, Inc. and its affiliated companies are an Equal Opportunity Employer and do not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class.
- Valid driver's license with clear driving record
• Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or a related engineering discipline required. • Previous experience in industrial engineering, manufacturing process improvement, production operations, or a related field preferred. • Experience in precast concrete manufacturing, heavy industrial manufacturing, construction materials, or similar production environments preferred. • Strong understanding of manufacturing processes, production planning, workflow optimization, and resource utilization. • Knowledge of Lean Manufacturing, Six Sigma, continuous improvement methodologies, and root cause analysis. • Experience conducting time studies, process mapping, capacity analyses, and labor productivity evaluations. • Strong analytical, mathematical, organizational, and problem-solving skills. • Ability to interpret production data, develop performance metrics, and make data-driven recommendations. • Proficiency in Microsoft Office applications, particularly Excel, and familiarity with data analysis and reporting tools. • Experience with production management software, or other manufacturing technologies preferred. • Strong project management skills with the ability to manage multiple priorities and improvement initiatives. • Strong communication and interpersonal skills with the ability to collaborate effectively across departments and organizational levels. • Excellent organizational, planning, leadership, problem-solving, and decision-making skills with strong attention to detail. • Ability to work independently or collaboratively, exercise sound judgment, and develop practical solutions in a fast-paced manufacturing environment. • Self-motivated, adaptable, and flexible to changing priorities and operational needs. • Working knowledge of applicable industrial safety standards and manufacturing quality requirements. FUNCTIONAL REQUIREMENTS This position requires frequent (40-69%) standing, walking, bending, stooping, reaching, climbing, balancing, and navigating active manufacturing facilities and outdoor production yards. Occasional (0-39%) sitting, kneeling, crouching, crawling, reaching, handling, feeling, use of hands/fingers, hearing (listening), observing (vision), hand/eye coordination, twisting, pushing, pulling, and lifting up to 50lbs may be required. Duties involve inspecting facilities, machinery, equipment, and infrastructure; supervising maintenance activities; and coordinating repairs and improvement projects. Must possess the ability to safely navigate ladders, elevated platforms, uneven or unimproved surfaces, muddy conditions, loose rock, and other industrial environments. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Adequate hearing, hand-eye coordination, and manual dexterity are required to inspect equipment, identify hazards, and perform job-related tasks. This position is subject to industrial hazards, including but not limited to moving machinery, overhead cranes, mobile equipment, hazardous energy sources (LOTO), elevated work areas, electrical and mechanical systems, and high noise levels. May require the use of hand and power tools and occasional entry into confined spaces in accordance with applicable safety procedures. Work is performed in both indoor and outdoor environments with exposure to dust, noise, vibration, and adverse weather conditions, including heat, cold, and rain. Must be able to wear required personal protective equipment (PPE) and comply with all Company safety policies and procedures. Must be able to walk on uneven surfaces, muddy conditions, loose rock, loose/soft sand, etc. Will be exposed to adverse weather conditions (heat, cold, rain, etc.). Candidate must be able to be medically qualified by a NON-DOT or other job specific physical. May be required to respond to facility or equipment emergencies outside normal working hours. Must be able to perform the essential functions of the position, with or without reasonable accommodation and meet any applicable job-related medical qualification requirements.
BENEFITS All full-time employees who work a minimum average of 30 hours per week are eligible for health & wellness and ancillary benefits. Waskey Bridges, Inc. and its affiliated companies are an Equal Opportunity Employer and do not discriminate on the basis of race, color, national origin, religion, sex, age, veteran status, genetic information or any other legally protected class.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Industrial Engineer in Baton Rouge, LA vacancy
- ...EngineerRequisitionJR000015860 Senior Manufacturing / Process Engineer (Open)LocationPort Allen, LAAdditional LocationsJob Description... ...device manufacturing.Experience in Ultra High Purity (UHP) industrial gas organizations. Working knowledge of cGMPs, including hands...SuggestedFull timeContract workFor contractors
$140k
...Aegis Worldwide Production Engineer Pay up to $140k Relocation Package Offered Position Summary: ~ Aegis Worldwide is partnered with a manufacturer in the Baton Rouge, LA area who is seeking a Production Engineer to provide technical leadership for assigned...SuggestedFull timeWorldwideRelocation package- ...Corrosion Engineer Taurus is a leading technical services contractor in the energy and industrial sector. Our business has over 60 years’ history and service excellence with an unwavering commitment to quality, safety, integrity, and respect. With operations spanning...SuggestedFor contractorsWork at office
- ...the two-year program, associates will: Gain first-hand experience in every operational position within an industrial facility. Work alongside engineering experts. Learn foundations of CapEx project planning and implementation. Enhance leadership skills by interacting...SuggestedLocal areaRelocationFlexible hours
$90k - $112.5k
...countries worldwide, every day. The Reliability & Maintenance Engineering (RME) team are the business partners that work tirelessly... ...material handling control systems, including PLC/PC controllers and industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus,...SuggestedRemote workWorldwideFlexible hoursShift workNight shift- DescriptionSobre nosotros Worley es una empresa global de expertos en energía, químicos y recursos naturales, con sede en Australia. Trabajamos en asociación con nuestros clientes para desarrollar proyectos y generar valor a lo largo del ciclo de vida de sus activos. Nos...
$124k - $186k
...Downstream and RenewablesExperience Level: Experienced ProfessionalsJob Description: What’s the roleShell is seeking an Operations Support Engineer to join its team at the Geismar Chemical Plant in Louisiana.The Operations Support Engineer will provide process engineering...Full timeTemporary workPart timeFor contractorsWork experience placementLocal areaRelocation packageShift work- ...Possible We have an immediate opening for a Process Controls Engineer working hybrid out of Baton Rouge, LA . This position will... ...safely and providing product to our customers. They work on industrial process control and safety instrumented systems in support of...Temporary workLocal areaImmediate startRemote workWork visaFlexible hours
- ...Schulte Hospitality Group in Baton Rouge is seeking a Maintenance Engineer to oversee property grounds and hotel guest rooms, conduct preventive maintenance, and complete work orders. The ideal candidate will have 2-3 years of relevant experience, including knowledge...
- ...world we live in. Become part of our global network of skilled engineers, scientists, auditors, planners and environmental specialists,... ...are we looking for? GHD has a fantastic opportunity for an Industrial Water (IW) Senior Engineer/ Project Manager who can be based anywhere...Live inWork at officeRemote work3 days per week
- ...replace controllers and I/O modules if needed Qualifications Education Required: · Bachelor’s Degree in Electrical Engineering Experience Required: Minimum of 5 years of experience in Yokogawa CentumVP DCS Ability to make DCS graphic and logic...
- ...client in Baton Rouge, LA that is seeking a Senior Electrical Control Systems Engineer (P.E.) to lead Electrical, Instrumentation & Controls (EI&C) projects supporting municipal and industrial facilities. This role will serve as a technical leader responsible for design...Hourly payContract workRemote work
$20 - $25 per hour
...build, estimate, and schedule mechanical, electrical and heavy industrial systems. • Support both administrative and construction... ...in Construction Management, Mechanical, Civil or Electrical Engineering or related degree • Must be legally authorized to work without...Full timeContract workTemporary workFor subcontractorSummer workInternshipSummer internshipWork at officeRelocationWeekend work$22 - $48 per hour
...Industrial TechnicianAre you interested in becoming an experienced Overhead Crane Service Technician? Join Konecranes, one of the world's largest material handling companies. We're seeking skilled individuals with electrical and mechanical expertise, comfortable working...Work at office- ...Overview ENGINEERING A BETTER TOMORROW". Our quality engineering, sustainable solutions and safety record inspire everything we... ...construction management services to the energy and chemicals industries. Position Summary TCE is seeking a motivated Mechanical...Full timeWork at officeLocal areaRelocation
- ...Entry-Level Rotating Equipment Engineer Job Purpose The Entry-Level Rotating Equipment Engineer provides technical and engineering... .... Recent graduates are encouraged to apply. Equivalent industry experience may be considered. Required Knowledge & Skills...Work at office
- ...Manufacturing Technician IIIAt Mezzo Technologies, we're partnering with industry leaders in aerospace, defense, energy, and high-performance motorsport to solve the most challenging thermal problems in engineering today. Our dynamic workplace fosters collaboration and empowers...Casual workAfternoon shift
- ...Rouge office. This role involves working on complex and unique engineering design projects, transforming general concepts into detailed... ...0 years experience in piping design within the Petro-Chemical industry • Creation and training of design teams including 3D modeling...Work at officeShift work
- ...Corrosion Engineer Our Story Crude oil is an essential element of our nation's energy supply, fueling our cars, trucks, airplanes... ...Maintain LOOP coating specifications and ensure they reflect current industry standards and operating needs. Investigate cathodic...Full timeFor contractorsWork at office
- ...assigned. Education and Experience Bachelor of Science in Engineering from an accredited university with at least nine (9) years of... ..., primarily in the refinery, petrochemical, or chemical industries, or an equivalent combination of education and experience sufficient...Work at office
- ...all aspects for complete designs of small and large mechanical engineering assignments using theoretical knowledge and practical design... ...Experience: This position requires 3+ years of relevant industrial experience in mechanical engineering. Required Knowledge,...
- ...HGA is seeking a Mechanical Engineer to support operations in Baton Rouge, LA. This Mechanical Engineer is responsible for developing... ...specifications to support Oil & Gas, Refinery, and Chemical industry projects, ensuring accuracy, compliance, and constructability....
$120k - $160k
...client in Baton Rouge, LA that is seeking a Senior Electrical Control Systems Engineer (P.E.) to lead Electrical, Instrumentation & Controls (EI&C) projects supporting municipal and industrial facilities. This role will serve as a technical leader responsible for design...Remote work- ...customer sites.The position requires driving to the customer industrial sites on a regular basis. Individuals must be capable of, and... ...control system installation and first-time powerup inspections, engineering Factory Acceptance Tests (FAT), commissioning, loop checkout,...Full timeLocal areaRemote workHome officeShift workNight shift
$116.86k - $175.56k
...sustained.As the leader in Energy‑as‑a‑Service (EaaS), we integrate engineering, design, construction, financing, and long‑term operations... ...design and be part of a model that is reshaping the industry—ENFRA is where engineering meets ownership, accountability, and...Work at office$134.43k - $201.92k
...sustained.As the leader in Energy‑as‑a‑Service (EaaS), we integrate engineering, design, construction, financing, and long‑term operations... ...design and be part of a model that is reshaping the industry—ENFRA is where engineering meets ownership, accountability, and...Work at office$27.5 per hour
...and support equipment and performing preventative maintenance procedures on motors, conveyor systems, filling equipment, and other industrial machinery. Responsibilities Support the production team as a mechanical expert in a millwright capacity. Ensure...Weekly payContract workTemporary work$31.5 per hour
Industrial Maintenance TechnicianDomino's Supply Chain Center is seeking an Industrial Maintenance Technician to join our team. This critical position demands advanced technical skills in designing, evaluating, troubleshooting, repairing, and installing production equipment...Work at officeImmediate startNight shift- ...across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with... ...deliverables comply with applicable regulatory requirements, industry standards, and Worley’s HSE and quality expectations.Deliver...Full time
- Austin is a leader in the Industrial Services market. We have developed and deployed safety and productivity focused technology that... ...Skills, and Background4-year degree in Construction Management or Engineering.Demonstrated collegiate-level computer skills, mathematics,...Permanent employmentFull timeContract workFor subcontractor
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Industrial Engineer. Be the first to apply!
Related searches
- industrial engineer Baton Rouge, LA
- industrial engineering manager Baton Rouge, LA
- industrial sales representative Baton Rouge, LA
- industrial supervisor Baton Rouge, LA
- industrial account manager Baton Rouge, LA
- industrial Baton Rouge, LA
- industrial automation Baton Rouge, LA
- industrial maintenance Baton Rouge, LA
- industrial electrical maintenance Baton Rouge, LA
- light industrial Baton Rouge, LA






