Structural Ironworker: Welding, Rigging & Erection
Turner Construction
Division: San Antonio Main Project Location(s): San Antonio, TX 78216 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Trade Education: Job Family: Trade Compensation: Non-Union Trade Position Description:Assemble, erect, connect, and weld steel projects. Essential Duties & Key Responsibilities: Fully comprehend scopes of work per plans and specifications to complete job assignment. Assemble hoisting equipment and rigging (e.g., cables, pulleys, and hooks, to move heavy equipment and materials). Bolt aligned structural-steel members in position for permanent riveting, bolting, or welding into place. Drive drift pins through rivet holes to align rivet holes in structural-steel members with corresponding holes in previously placed members. Erect metal and pre-cast concrete components for building structures. Fasten structural-steel members to hoist cables, using chains, cables, or rope. Force structural-steel members into final positions, using turnbuckles, crowbars, jacks, and hand tools. Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members. Pull, push, or pry structural-steel members into approximate positions for bolting into place. Unload and position prefabricated steel units for hoisting and use rope to guide them into position. Verify vertical and horizontal alignment of structural-steel members, using plumb bobs, laser equipment, transits, and/or levels. Cut, bend, and weld steel pieces, using metal shears, torches, and welding equipment. Dismantle structures and equipment as needed. Install fiberglass building insulation, metal cladding, and siding, standing seam roofing, insulated metal panels, windows, passage doors, and overhead doors. Fabricate metal parts such as steel frames, columns, beams, and girders, according to blueprints or instructions from supervisors. Operate equipment including forklifts, backhoe, skid steer, excavator, compactors, and construction hoist. Ensure Trade employees, subcontractors, and vendors to comply with Turner standards, safety codes, regulations, and jobsite security. Display high level of teamwork, integrity, commitment, and leadership in daily operations. Fully understand work instructions, project signage, and safety instructions from tool and equipment manufacturers and prepare and inspect tools prior use to ensure safe and working condition. Participate in daily Pre-Task Plans, follow safety expectations for operation of equipment and tools, select appropriate equipment for performing work, adhere to safety protocols to perform work, and wear appropriate PPE (Personal Protection Equipment). Ensure security of equipment and work area while conducting operations. Identify, communicate, and escalate problems and issues to supervisor for immediate resolution. Track production of completed tasks. Maintain positive working relationships with customers, contractors, suppliers and other employees. Other activities, duties, and responsibilities as assigned. Qualifications: Minimum of 3 years of welding experience required or equivalent combination of education, training, and experience Structural Welding Certification, as required Proficient knowledge of materials, methods, and tools involved in construction or repair of buildings or other structures, foundations, and framing Ability to understand, and interpret construction contract documents, drawings (e.g., shop, structural, blueprints, sketches, and/or building plans), specifications, scopes of work, vendor tags, and project schedule to determine dimensions and materials to execute work activities Proficient use of related tools to complete work assignments Knowledge of and able to apply arithmetic and basic geometry to work tasks Ability to measure, read, and convey lengths with ruler or tape with high degree of accuracy Able to think critically and use good judgment to solve problems Ability to take direction, work independently with minimal supervision, and in team environment Ability to apply active listening skills, ask clarifying questions, and complete assignments as directed Clear and professional verbal and written communication skills and engage with all levels of teams, clients, business partners, and management Reliable transportation required Ability to travel using various modes (e.g., automobile, train, air) and accommodate night and weekend work as needed Physical Demands:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance requires vision abilities including close, distance, color, peripheral, depth perception, and focus, and hearing abilities with or without the use of an aide. Performance requires physical ability to navigate work areas under construction, climb permanent and temporary stairs, passenger use of construction personnel hoists, and climb ladders, along with the following: Constantly: Standing, walking, combined standing/walking, lifting/lowering/carrying weights up to 50 lbs., reaching above and below shoulder height, bending/twisting neck, bending at waist (forward & sideways), balancing, pushing/pulling, climbing, repetitive motion, hand/wrist flexion extension, and exposures to noise/dust/chemical, and working on heights. Frequently: Squatting and kneeling. Occasionally: Sitting, crawling, confined space hazards, and lifting/lowering/carrying weights over 50 lbs. Work Environment:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works on-site at the construction site where the employee is exposed to moving mechanical parts, high precarious places, fumes or airborne particles, outside weather conditions, and risk of electric shock. The noise in the work environment is usually moderate to loud. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. #J-18808-Ljbffr
$27 - $36 per hour
...Antonio, TX 78220Pay Range: $27.00 - $36.00 per hourWhat's the Job?Weld units and components using established procedures and standard... ...equipment, hand tools, material preparation, alloys, and safe rigging practices.What's in it for me?Competitive pay ranging from $27.0...SuggestedHourly pay$27 - $36 per hour
...220 Pay Range: $27.00 - $36.00 per hour What's the Job? Weld units and components using established procedures and standard welding... ...equipment, hand tools, material preparation, alloys, and safe rigging practices. What's in it for me? Competitive pay ranging...SuggestedHourly payPermanent employmentFlexible hoursShift work$19.23 - $30.76 per hour
Job Description Johnson Controls , a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience...SuggestedHourly payLocal areaShift workDay shift$23 per hour
...and we’re looking for skilled professionals to help us do it. As a Fitter Welder , you’ll play a key role in the fabrication and welding of components that power our innovative solutions. This is more than just a job—it’s a chance to grow your career in a supportive,...SuggestedHourly payShift workWeekend work- ...work completed so as to facilitate the accounting activities.Maintaining routine inventory supplies that are used for operating the welding unit via inspection of stocks and ordering fresh stock as and when required.Skills and SpecificationsKnowledge of the properties...Suggested
- ...seeking a Journeyman Welder. The individual will permanently fit and weld various metals—including steel, aluminum, and stainless steel—... ...gaps with welding. Test and inspect welded surfaces and structures to identify flaws. Maintain equipment in a condition that does...Permanent employmentNight shiftWeekend work
$21.5 per hour
...industry. You will work under the guidance of experienced professionals while developing essential skills in fit up, fabrication and welding. What you will do You will be responsible for the local delivery and execution of the fit up, fabrication and core welding to...Hourly payApprenticeshipTraineeshipLocal areaFlexible hoursShift workWeekend work- ...Welder FabricatorThe Welder Fabricator is responsible for certified structural welding, custom fabrication, mechanical installation, and equipment support across the facility. This position supports the Maintenance and Kaizen teams by designing, fabricating, and installing...
$28 - $30 per hour
...Structural Steel WeldersTradesmen International is immediately hiring experienced Structural Steel Welders for projects located in or... ...to advance your career!Job Scope:Perform FCAW (Flux-Cored Arc Welding), FCAW-G, SMAW, and SAW welding on structural steel componentsWeld...Work at officeImmediate startDay shift- ...WELDER. Individual is responsible for permanently fitting and welding of various metals to include but not limited to; steel, aluminum... ...welding pieces and filling gapsTest and inspect welded surfaces and structure to discover flawsMaintain equipment in a condition that does...Permanent employmentNight shiftWeekend work
- ...Operator - Job Description Job Title: Welder/Fabricator/Saw Operator Report to: Warehouse Manager The Welder/Fabricator/Saw Operator will weld, cut, fabricate, and paint metal and products by using flame-cutting, hand welding equipment, torch cutting, and machine cutting. In...ApprenticeshipWork experience placement
$45k - $60.95k
...involves contributing to high-quality product production in a dynamic environment. As a Welder, you'll perform MIG, TIG, and stick welding tasks to assemble and repair metal components. You'll also adhere to safety protocols and maintain a clean, organized workspace. You...Full time- ...welder.This person must be able to join metal parts, such as pipe or metal plates as specified by layout, blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned.Specific...Daily paidRelocationWork visa
$25 per hour
...hr. depending on experience and position Seeking at least 1-2 yrs. experience Welder Responsibilities: Arc flux, MIG, TIG welding. Steel, aluminum, copper, stainless. Read/interpret blueprints. Clean, cut, grind and align metal parts. Fabrication in...Immediate start- Job TitleWorley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction...
- ...RoleWe have active industrial and marine projects across Texas and need multi-process welders who can perform across disciplines. If you weld TIG and Flux, TIG and Stick, orbital, or ship applications — we have steady work waiting. Qualified candidates move through our...Daily paidImmediate startRelocation package
$27 per hour
...Structural WeldersTradesmen International is immediately hiring experienced Structural Welders for projects located in or around McCracken County, KY. This is a first shift opportunity and the pay rate is up to $27/hour for locals and starting as $24/hour plus $100 per...Daily paidWork at officeLocal areaImmediate startDay shift- ...Description We are seeking a Hollow Metal Shop Welder to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal frames and modify metal doors. Responsibilities: fabricate finished metal products Install and...
- ...Structural Welders – 6GR | 2G 3G 4G | Tarpon Specialty Services (Paloma Specialty Services) | Ingleside, TX - Many Jobs Available Tarpon... ...Texas and need skilled structural welders now. If you can weld in multiple positions and maintain quality to code, we want to...Daily paidImmediate startRelocation package
$28 per hour
...galvanized Read/interpret blueprints Clean, cut, grind and align metal parts Fabrication in shop Structural fabrication Finish outs Test and assess welded surfaces Reading measurements/diagrams, measure, lay out and fit metal components accurately...Immediate start$19 per hour
...Maintenance needs to be done. Maintenance of railcars including: changing wheels, brakes, safety fixe, fitting, fabrication, and stick welding of operating railcars Mechanically work on equipment/machinery All welders need to provide their own welding gear which...$67.9k - $101.9k
...society forward.The Lead Welder is responsible for overseeing daily welding and fit-up activities, ensuring quality workmanship,... ...working knowledge of recognized pressure-containing equipment, structural fabrication, and welding construction standards.Understand:Weld...$28 - $30 per hour
...Tradesmen International is immediately hiring experienced Structural Steel Welders for projects located in or around the San Antonio... ...your career! Job Scope: Perform FCAW (Flux-Cored Arc Welding), FCAW-G, SMAW, and SAW welding on structural steel components...Work at officeImmediate startDay shift$27 per hour
...Tradesmen International is immediately hiring experienced Structural Welders for projects located in or around McCracken County,... ...your chance to advance your career! Job Scope: Flux core welding Working with carbon steel Working with stainless steel...Daily paidWork at officeLocal areaImmediate startDay shift- A custom fabrication shop in San Antonio is looking for skilled welders and fabricators. Join a team that values creativity and craftsmanship, creating unique products such as truck bumpers and hunting vehicle conversions. This role offers a stable work environment with...
- ...Description Position: Welder Reports To: Foreman Summary: Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Welder must be able to pass a welder qualification test consisting...
- ...contribute creative solutions WELDERS Create great looking welds and finish what the fabricators start MIG weld custom-... ...name on it, and we stand behind our work. From custom hunting rigs that tour ranches across Texas to heavy-duty truck bumpers that...Hourly payMonday to FridayWeekend work
- ...Job Description Job Description Key Responsibilities: Read and interpret blueprints, isometric drawings, and welding specifications. Measure, cut, bevel, fit, and align pipe and fittings. Perform welding using TIG, MIG, SMAW, or other required processes....
- ...Fabricate, fit-up, and assemble stainless steel, steel, and aluminum components per project specifications Interpret and build to AWS weld symbols and drawings accurately Perform LASER, TIG, and MIG welding in various positions Receive, measure, and verify CNC...
$28 per hour
...Combo Welders for a shop in San Antonio. Will be responsible for welding and fabricating custom stainless-steel components and... ...as required). Duties: Fabricate and weld metal parts and structures according to blueprints and specifications. Perform welding...Immediate start
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Structural Ironworker: Welding, Rigging & Erection. Be the first to apply!


