Dip Operator Trainee (87393)
$25.57 - $30.8 per hourThe Gill Corporation
Job Details:
Job Location: 0T534 CA - El Monte, CA 91731, Position Type: Full Time, Salary Range: $25.57 - $30.80 Hourly, Job Shift: Multiple Shifts
Who we are:
The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products.
Responsibilities:
Transports blocks to dip tanks, places block in dip basket, and activates specified dip program.
Removes dipped blocks from tanks, delivers blocks to ovens, and activates specified bake programs.
Removes baked blocks from ovens and stages them for further processing.
Adds resin and alcohol to dip tanks as needed. Calculates and records the amount of alcohol and resin used per block.
Weighs blocks before and after dipping, and records on work order and/or dipping software.
Sets oven temperature controls and places dipped blocks in oven to bake and dry for specified time.
Records densities and all other necessary information on work order and/or dipping software.
Must be available any shift and over-time, including weekends.
Other essential duties may be assigned.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Required Qualifications:
High School Diploma
Good math skills
One or two years of related experience and/or training
Forklift Certification a plus
Satisfactory Lung Capacity Test to properly use Respiratory Protection as needed/required
Must be able to speak, read, and write English well
Acceptable Spirometry Test results.
Must be able to lift, push & pull a minimum of 50 lbs.
ITAR Requirement:
This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A "U.S. person" according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee.
Equal Opportunity:
The Gill Corporation is an Equal Opportunity Employer. Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances.
Accommodations:
The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department.
J-18808-Ljbffr
- ...The Gill Corporation in El Monte, CA is seeking a full-time position involving dipping, baking, and block handling in a manufacturing environment. You will operate dip tanks, monitor ovens, record process data, and comply with ITAR and safety requirements. The role requires...TraineeshipFull timeShift workWeekend work
- The Gill Corporation, a leading aerospace manufacturer, seeks a Lay Up Operator Trainee to assist the layup of panels and liners using precut materials. You will work under the Production Supervisor and contribute to setup, assembly, and changeovers while maintaining quality...TraineeshipApprenticeship
- The Gill Corporation is seeking a Lay Up Operator Trainee to assist in assembling precut materials into panels and liners. You will follow GPS instructions, support the Lay Up Operator in setup, assembly, and changeovers, and help loading/unloading presses. You must lift...TraineeshipApprenticeship
- The Gill Corporation is seeking a Lay Up Operator Trainee to assist in assembling precut materials into panels or liners. You will report to the Production Supervisor and support setup, assembly, and changeover activities as directed. Ideal candidates will have a high...Traineeship
- The Gill Corporation is seeking a Lay Up Operator Trainee in El Monte, CA to assist the Lay Up Operator in assembling precut materials into panels and liners. You will follow GPS work orders, ensure shelf-life compliance, and participate in setup, assembly and changeovers...TraineeshipShift workNight shiftWeekend work
- The Gill Corporation is seeking a Press Operator Trainee in El Monte, CA to perform troubleshooting, monitor press systems, and assist operators to meet production deadlines. Responsibilities include checking specifications, loading/unloading presses, inspecting panels...Traineeship
- The Gill Corporation seeks a Press Operator Trainee in El Monte, CA to support the production of aircraft panels and liners. You will troubleshoot, replace defective components, monitor press systems, read guides, determine product suitability, and inspect irregularities...Traineeship
- The Gill Corporation is seeking a CNC Operator Trainee to join our production team. Under supervision, you will set up and operate CNC machines to cut, shape and form metal work pieces to exact specifications. You will review drawings, interpret tolerances, and adjust...Traineeship
- The Gill Corporation in El Monte, CA is seeking a Prepreg Operator Trainee for the 2:00pm-10:30pm shift. The role involves setting up equipment, running material, and recording data with strict quality checks. ITAR compliance and equal opportunity employment are noted...TraineeshipShift workWeekend workAfternoon shift
- The Gill Corporation is seeking a CNC Operator Trainee in El Monte, CA 91731. The role involves setting up and operating CNC machines to cut and shape metal parts under supervision, with emphasis on accuracy and safety. Training will cover tool changes, feed/speed adjustments...Traineeship
- The Gill Corporation is seeking a CNC Operator Trainee in El Monte, CA. This full-time role involves setting up and operating CNC machinery to shape metal parts to exact specifications, under supervision. You will load programs, adjust feeds and speeds, change tools, and...TraineeshipFull time
$23.97 - $28.88 per hour
...Press Operator TraineeSalary Range $23.97 - $28.88 Hourly Position Type Full Time Job Shift 2nd ShiftOverviewThe Gill Corporation is one... ...products.The Gill Corporation is looking for a Press Operator Trainee who will perform troubleshooting, replace defective machine components...TraineeshipHourly payPermanent employmentFull timeLocal areaShift workWeekend work$22.15 - $26.69 per hour
...structures such as aircraft galleys and bulkheads, honeycomb core and related products. The Gill Corporation is seeking a Lay Up Operator Trainee who can assist the Lay Up Operator to assemble precut material slices (Balsa, Aluminum, Nomex) into panels or liners....TraineeshipHourly payPermanent employmentFull timeLocal areaShift workNight shiftWeekend work$25.57 - $30.8 per hour
...structures such as aircraft galleys and bulkheads, honeycomb core and related products. The Gill Corporation is seeking a Prepreg Operator Trainee who will set up and operate the work center. Prepares all necessary equipment and performs material testing. Responsibilities...TraineeshipPermanent employmentWork at officeLocal areaFlexible hoursShift workAfternoon shift$25.57 - $30.8 per hour
...CNC Operator TraineeSalary Range $25.57 - $30.80 Hourly Position Type Full Time Job Shift 1st ShiftThe Gill Corporation is one of the... ...related products.The Gill Corporation is seeking a CNC Operator Trainee who under general supervision of an experienced CNC Operator or...TraineeshipHourly payPermanent employmentFull timeLocal areaShift work- ...Description Job Description Benefits: ~401(k) Benefits/Perks ~401k Job Summary We are seeking a few Machine Operators . NO EXPERIENCE NECESSARY. In this role, you will operate cnc and manual machines. Please apply in person. Interview hours are from...TraineeshipMonday to Friday
$25.57 - $30.8 per hour
...structures such as aircraft galleys and bulkheads, honeycomb core and related products. The Gill Corporation is seeking a CNC Operator Trainee who under general supervision of an experienced CNC Operator or Supervisor, sets up and operates numerical control machine to...TraineeshipHourly payPermanent employmentFull timeLocal areaShift workDay shift$105.88k
...**Journey-level experience applies to a person who has completed an apprenticeship program or is an experienced worker, not a trainee, and is fully qualified and able to perform a specific trade without supervision. PHYSICAL CLASS III - MODERAT E: This class...TraineeshipFull timeApprenticeshipWork experience placementSecond jobImmediate startShift workNight shiftAfternoon shift$32.59 - $37.72 per hour
...releases. Works from blueprints, specifications and plans. Operates key cutting and code cutting machines. Estimates materials required... ...experience ~ Four years' experience as a trade-related trainee may substitute for completion of a four year apprenticeship program...TraineeshipApprenticeshipWork experience placementLocal areaImmediate start- ...Plant Operator Trainee Plant Operator Trainee positions may be utilized in water, wastewater, or potable reuse treatment plants. Employees will be required to obtain and maintain certification. For certification requirements, click on the following link: Plant...TraineeshipContract workInternshipWork at officeLocal areaFlexible hoursShift workNight shiftRotating shift
$81.7k - $142.03k
WATER TREATMENT OPERATOR 5885 B (Revised 05-05-26) Salary $81,703.00 - $142,025.00 Annually Location CITY OF LOS ANGELES, CA Job Type FULL... ...treatment of potable water. NOTE: Entry-level positions are trainee positions. A Water Treatment Operator in a training position must...TraineeshipPermanent employmentFull timeNight shiftDay shift- Job Overview As a CNC Operator (Trainee), you will be an important part of making and finishing parts. You will work with advanced CNC machines that transform 3D‑printed metal pieces into high‑quality components used in aircraft. This role connects 3D printing to the final...Traineeship
- ...work to close tolerances, exact fit and structural soundness. Operates and uses a wide variety of specialty woodworking machines and tools... ...VA contractors, researchers, volunteers and health professions trainees (HPTs) who are expected to perform any or all of their work at...TraineeshipFull timePart timeFor contractorsSeasonal workRemote workWork from homeMonday to Friday
$35 - $60 per hour
...Description Position Overview We are seeking an experienced Header Operator to join our precision manufacturing team. This position is... ...systems as required. Train and assist junior operators or trainees on proper setup, operation, and safety procedures. Support continuous...TraineeshipHourly payRelocation packageAll shifts- ...department before accepting a job offer. A Wastewater Conveyance Operator performs a variety of semi-skilled and skilled tasks in the... ...Service Commission Rule 5.30. A Wastewater Conveyance Operator in a trainee position must successfully complete a three-year training...TraineeshipFull timeTemporary workPart timeWork at officeRemote work
- ...n \n Valid CDL-A and 3+ months of current experience required \n This lane is not suitable for students, recent grads, or trainees \n Must be 21 years or older \n Must be able to pass a DOT drug screen \n \n Your Journey to Success Starts Here. C.R....TraineeshipDaily paidMinimum wageLocal areaImmediate start
- ...A valid CDL-A and 3+ months of current experience are required \n This lane is not suitable for students, recent grads, or trainees \n Home time varies by route and location \n \n Our Fleets Offer: \n \n Competitive pay \n Weekly paychecks \n...TraineeshipMinimum wageLocal areaImmediate start
$97k
...This lane is not suitable for students, recent grads, or trainees \n \n This Dedicated Route Offers: \n \n Home 2 days every... ...for experienced CDL-A drivers to run Solo. This is a dry van operation hauling Anheuser-Busch products within 48 states. Delivery locations...TraineeshipMinimum wageImmediate start2 days per week$19.5 per hour
Description A Carpenter constructs, erects, installs, and repairs structures and fixtures of wood, metal, wallboard, etc., using carpenter's hand tools and power tools, and conforming to local building codes. While maintaining the necessary production and quality required...Hourly payFor contractorsApprenticeshipLocal area- ...with C.R. England for over 20 years. Lane Details: Dry van operation hauling Anheuser-Busch products Coverage across the lower 4... ...~ This lane is not suitable for students, recent grads, or trainees Benefits: ~ Medical, Dental, Vision, HSA, FSA, Life and...TraineeshipWeekly pay
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Dip Operator Trainee (87393). Be the first to apply!
- automation operator El Monte, CA
- coating operator El Monte, CA
- material handling operator El Monte, CA
- pool operator El Monte, CA
- systems operator El Monte, CA
- data center operator El Monte, CA
- refinery operator El Monte, CA
- call center operator El Monte, CA
- swimming pool operator El Monte, CA
- set up operator El Monte, CA




