Materials Associate
BorgWarner
PC&L AssociateThe PC&L Associate is responsible for loading and unloading materials to and from production lines, storage areas, and trailers. The operator is responsible for following the job responsibilities within the plant and/or warehouse while operating in a fast-paced environment:Loads product, unloads product, receives product, ships product, moves materials at elevated heights, and issues material using system transactions.Key Roles & ResponsibilitiesTo perform this job successfully, an individual must have the ability to be able to perform each essential job duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Standard Duties:PC&L Associate will be expected to safely perform all tasks assigned by Leadership including all positions within the Physical Logistics department.Safely operates all equipment to which the individual is certified (ex): Sit-down ForkliftsStand Up Lifts (Both Reach and Pacer)TuggersElectric JacksReads and understands work instructions and/or follows oral instructions to execute the material flow requirements.Manually loads and unloads materials onto or from pallets, trays, racks, baskets, and shelves on foot and by hand as required (see physical requirements).Accurately and timely enters materials transactional information into SAP and other systems as required.Reads electronic and manual bill of materials, pull sheets, pick sheets to retrieve and deliver necessary materials for operations.Support 5S / Housekeeping activities as required.Use appropriate deviation areas, hold tags, to process defective parts through nonconforming material procedure.Loads/Unloads materials into trailers adhering to Dock Safety Protocol.Meet physical logistics KPI's, Associate Engagement and TeamworkAdherence to FIFO standards throughout all storage areas and material flow points.Wear all required PPE and follow box cutting safety protocols.Safety, Health and Physical RequirementsStand for long periods of time including during operation of stand -up lifts.Lifting shoulder high up to 35 lbs repetitively.Stepping up and down off lift; walking long distances over extended periods.Ability to work in a fast -paced environment.Working in a non-climate -controlled environment.Repetitive motion activities including but not limited to box cutting, standing, lifting, loading/unloading carts.All employees are responsible for knowing, understanding, and complying with the safety policies and procedures.Key CompetenciesSafetyInitiative and high sense of urgencyJudgement/Decision MakingTeamwork/Interpersonal SkillsAttendanceInternal/external Customer Service OrientationAttention to detail and accuracy of workEducation & ExperienceEducation:High School diploma or GED requiredExperience:3 months of Powered Industrial Truck experience required Active Forklift Certification License preferredKnowledge of SAP/ERP systems preferredExperience in fast paced industrial lean environment preferredComputer Skills:To perform this job successfully, an individual should have knowledge of SAP Inventory software; Excel Spreadsheet software and Word Processing software.EEO Statement"BorgWarner is an equal employment opportunity employer such that all qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity/expression, national origin, disability or protected veteran status."Career Scam Disclaimer: BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide their national ID numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner's website to verify the authenticity of any employment opportunities.
$18.03 per hour
...Material & Machine Associate – 1st ShiftLocation: Seneca SCShift: 1st ShiftSchedule: Full-TimePay Rate: $18.03 per hourWhy Join PPG Quality?At PPG Quality, we believe our employees are our greatest asset. We offer competitive pay, affordable benefits, and opportunities...SuggestedFull timeLocal areaDay shift- ...Materials AssociateThe Materials Associate is directly responsible for performing receiving, shipping, and storage functions in support of production operations according to established procedures. The Materials Associate requires the ability to safely move materials...SuggestedCasual workRelocationLong distanceNight shift
- ...Position Summary The PC&L Associate is responsible for loading and unloading materials to and from production lines, storage areas, and trailers. The operator is responsible for following the job responsibilities within the plant and/or warehouse while operating...SuggestedFull timeLong distance
- ...Responsibilities Analyze production and operational processes to identify inefficiencies. Collect and interpret data related to labor, materials, equipment, and workflow. Assist in developing methods to improve productivity and reduce costs. Conduct time studies and work...SuggestedRelocation
- Process Engineer This position will provide engineering, technical support and leadership to the Seneca catalyst manufacturing operation. Provides direction of technical operations and activities of assigned manufacturing department. Specifically develops and updates...Suggested
$100.8k - $141.75k
...pertains to rework or to be scrapped.Daily supports the incoming material suppliers if quality issues happen.Plans and designs... ...and the developmental of future products.Assists manufacturing associates by provided the training to the team leads and operators within...Hourly payFull timeAll shiftsWeekend work- Automation Design Engineer - Clemson, SC Automation Engineer Controls Designer PLCs Programmable Logic Controllers Programmer Integration HMIs Human Machine Interfaces Robots Motors Sensors Actuators Linear & Rotary Motion Control Machine Vision Electronics AC & DC Electrical...Contract workRemote workWork from homeRelocation package
- Job Description Job Description This job is posted on behalf of Gallman Consulting by Top Echelon. About our Client: Our client is a rapidly growing specialty chemical manufacturer whose products support advanced coatings, adhesives, electronics, telecommunications...
- ...engineering principles, data analytics, labor management methodologies, and continuous improvement tools to optimize warehouse processes, material flow, facility layout, workforce utilization, and inventory movement. The Industrial Engineer partners with Distribution...Temporary workSeasonal workImmediate startMonday to FridayFlexible hours
- ...powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards. Key... ...areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and...Contract workApprenticeshipWork at office
- ...workspace for maximum efficiency. * Confer with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards. * Estimate production times, staffing...Full timeFlexible hours
- ...structured problem-solving methodologies (e.g., 8D, 6 Sigma). Disposition parts on hold regarding rework or scrap, and support incoming material suppliers on quality issues. Maintain equipment post-launch for continuous improvement, efficiency, and safety troubleshooting,...Hourly payFull timeAll shiftsWeekend work
$77k - $99k
Schneider Electric has an opportunity for the GSC Development Program - Safety, Environmental & Health Engineering Track * a dynamic, three-year rotational experience designed to accelerate your career, set to start January 2027 . You MUST be willing to relocate, as...Rotational programFull timeTemporary workInternshipLocal areaImmediate startRelocationVisa sponsorshipFree visaFlexible hours- ...and efficient production methods. Partner with vendors and suppliers to define product specifications, evaluate equipment and materials, and support procurement decisions. Estimate production times, labor requirements, equipment needs, and manufacturing costs to...
- Job Description Job Description Exempt Salary Position - First Shift Basic Qualifications: PRIMARY FUNCTION: Provide technical support to plant operation including leading capital projects, process improvement, implementing new technology, bench marking best...For contractorsDay shift
$92.8k - $127.6k
...functional team alignment with respect to Suppliers. Work with Suppliers and our internal teams to ensure compliance of incoming material to, Customer Specific (CSR), drawing and design requirements and ensure the flow of quality product into the BorgWarner facilities...Full timeWork at office$86.4k - $129.6k
Schneider Electric is seeking a motivated and detail-oriented Electrical Engineer to join our dynamic team at our Seneca, SC manufacturing facility. This is a fantastic opportunity to launch your engineering career with a global leader in energy management and automation...Full timeTemporary workImmediate startRelocation packageFlexible hoursDay shift- Job Description Job Description . Position Title: Sales Engineer 1 Employee Status: Exempt Reports to: VP of Sales Operations Employment Status: Full-Time Job Summary: The Sales Engineer is the technical cornerstone of CORE Transformers' growing...Full time
- Job Description Job Description CORE Transformers is seeking an accomplished Sales Engineer to serve as the senior technical and commercial authority for complex new construction projects. This influential role will help shape winning strategies for hyperscale data...Local area
- ...conventional engineering practice. Controls a variety of complex features such as conflicting design requirements, unsuitability of standard materials, and difficult coordination requirements · Perform other duties as assigned Additional Information: ~ Travel is...Full timeWork at officeAll shiftsWeekend work
- ...that the overall customer quality and regulatory requirements and expectations are met. Facilitate all quality-related activities associated with customer product introductions within APQP. Ensure PPAP target dates are successfully met. Proactively work with customers...Full timeApprenticeship
$100.8k - $141.75k
This position coordinates and performs design and development engineering, leads warranty resolution, and implements cost-reduction initiatives. Key activities include drawing revisions, tolerance stack-up analysis, and fastener and joint analysis. Responsibilities include...Full timeWork at office$90k - $115k
Growing SE looking for highly talented and ambitious Senior Project Engineers who want to ignite their career in high-end large construction projects. This Jobot Job is hosted by: Sam Kippen Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending...Daily paidFor contractorsFor subcontractorWork at officeLocal area- Quality Engineer I - Manufacturing Location: Westminster, SC Job Type: Full-Time | Direct Hire Schedule: 40 Hours per Week HTI is seeking a Quality Engineer I for a manufacturing facility in Westminster, SC! This is a great opportunity for an early-career...Full timeWork at office
- Senior Electrical Engineer – Power Systems, Switchgear & Transformers URGENT NEED! We are seeking a Senior Electrical Engineer to serve as the technical authority for medium-voltage transformer applications supporting mission-critical data centers, renewable energy...For contractors
- ...Reviews shop drawing and submittals.Reviews plans from the standpoint of value analysis and constructability, ensuring appropriate materials are utilized. Communicates inconsistencies to the architect.Recommends labor saving and other cost-saving methods, which will save...Temporary workFor contractorsFor subcontractorInternshipRelocationFlexible hours
$80.8k - $111.1k
The Senior Tooling Engineer leads the design, development, launch, optimization, and ongoing support of manufacturing tooling and related processes. This position coordinates with suppliers, vendors, project teams, and multiple engineering disciplines to ensure tooling ...Full timeTemporary workWork at office- Job Description Job Description US Engine Valve is seeking a motivated and detail-oriented Quality Engineer to support and maintain our Quality Management System. This role is ideal for a candidate who enjoys analyzing production and laboratory data, investigating...Work at office
- ...Job Description Job Description Position Summary The Associate Manufacturing Engineer plays a key role in supporting production operations by improving manufacturing processes, designing tooling and fixtures, troubleshooting production challenges, and driving...Traineeship
- Sandvik Coromant in Westminster, SC is looking for aRELIABILITY ENGINEERROLE SUMMARY:A Sandvik Coromant Reliability Engineer plays a key role in improving the uptime and reliability of equipment related to manufacturing, infrastructure, and site utilities. The role will...Full timeImmediate startRemote workRelocationRelocation package
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Materials Associate. Be the first to apply!
- preferred materials Seneca, SC
- building materials Seneca, SC
- materials testing Seneca, SC
- construction materials testing Seneca, SC
- building materials sales Seneca, SC
- outside sales building materials Seneca, SC
- material control Seneca, SC
- material handling engineer
- material management specialist
- material planning specialist





