Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Production Trainee REPOST (Redhawk)

APS Residential Services

Production Trainee REPOST (Redhawk)

APS has an opening for a Production Trainee at our Redhawk Power Plant. Upon successful completion of the Production Trainee Program (maximum six months), you will be promoted to the next classification and continue progressing toward becoming a fully qualified Gas & Oil Power Plant Auxiliary Operator.

What You'll Do as a Production Trainee:

  • Support the safe, efficient, and cost‑effective production of electric energy.
  • Supply and prepare equipment, tools, materials, and protective devices needed for various jobs.
  • Haul and position materials and parts; assist as needed on tasks.
  • Operate hand tools, power tools, and a forklift.
  • Perform digging and backfilling using hand tools.
  • Spend the first 180 days split between classroom training and fieldwork (e.g., helper or laborer‑type duties)

Career Path & Advancement: Employees progress through the classification line over 1.5 Years. The program is structured to give you the skills and experience needed to become a fully qualified Auxiliary Operator.

An Auxiliary Operator supports power plant operations by monitoring, operating, and maintaining auxiliary equipment to ensure safe, efficient, and reliable electricity production. The Auxiliary Operator takes field readings, identifies and corrects equipment issues, performs basic maintenance and water testing, follows strict safety procedures, and coordinates closely with the Control Operator during normal operations, startups, shutdowns, and emergencies at the plant.

Work Location & Placement: Please note: Selected candidates will be based at the Redhawk Power Plant and may be scheduled for training rotations at any of the following locations:

  • West Phoenix Power Plant — Phoenix, AZ
  • Ocotillo Power Plant — Tempe, AZ
  • Sundance Power Plant — Coolidge, AZ
  • Yucca Power Plant — Yuma, AZ

The work schedule for this position is a 12-hour rotating shift as defined in the Collective Bargaining Agreement; LOMA dated December 8, 2015. After completion of the AO Training program, if there is not an Auxiliary Operator position open in your classification at the plant where you completed your training program, you may be forced to go to other plants that have an open position.

Production Trainee Program Requirements:

  • Must successfully complete all required training for Production Trainee within 6 months of hire.
  • Reasonable and necessary overtime will be required.
  • Production Trainee will report to Operations based on projected plant needs.

Minimum Requirements:

  • High School Diploma or GED.
  • Must be eighteen (18) years or older.
  • Possess a valid driver's license.
  • Pass both the EEI mechanical aptitude test (MASS) and the EEI operations aptitude test (POSS).
  • Must live within reasonable distance (one (1) hour) of headquarters.
  • Pass a panel interview.
  • Pass APS physical exam (drug test, etc.).
  • This position requires working with aerial equipment, which has weight restrictions of 300lbs or less.

Major Accountabilities:

  • Complies with safety and environmental rules and regulations.
  • Complies with all Company policies and procedures.
  • Successfully completes all assigned training per the training plan.
  • Hauls and positions material and parts. Assists as needed.
  • Operates hand tools, power tools and forklift.
  • Digs and back fills with hand tools.
  • Performs other duties as assigned.

Training Objectives:

  • Safety and plant orientation
  • Power Plant Fundamentals (Operations & Maintenance)
  • Basic computer skills
  • Intro into the electric utility business
  • Welding and cutting safety
  • Mandatory training (includes LOTO, OSHA, Environmental, Safety, etc)

Hands On Training:

  • Welding and cutting basics
  • Forklift training
  • Arial lift equipment (site specific)

Export Compliance / EEO Statement This position may require access to and/or use of information subject to control under the Department of Energy's Part 810 Regulations (10 CFR Part 810), the Export Administration Regulations (EAR) (15 CFR Parts 730 through 774), or the International Traffic in Arms Regulations (ITAR) (collectively, 'U.S. Export Control Laws'). Therefore, some positions may require applicants to be a U.S. person, which is defined as a U.S. Citizen, a U.S. Lawful Permanent Resident (i.e. 'Green Card Holder'), a Political Asylee, or a Refugee under the U.S. Export Control Laws. All applicants will be required to confirm their U.S. person or non-US person status. All information collected in this regard will only be used to ensure compliance with U.S. Export Control Laws, and will be used in full compliance with all applicable laws prohibiting discrimination on the basis of national origin and other factors. For positions at Palo Verde Nuclear Generating Stations (PVNGS) all openings will require applicants to be a U.S. person. Pinnacle West Capital Corporation and its subsidiaries and affiliates ('Pinnacle West') maintain a continuing policy of nondiscrimination in employment. It is our policy to provide equal opportunity in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations. This policy of nondiscrimination shall include, but not be limited to, recruiting, hiring, promoting, compensating, reassigning, demoting, transferring, laying off, recalling, terminating employment, and training for all positions without regard to race, color, religion, disability, age, national origin, gender, gender identity, sexual orientation, marital status, protected veteran status, or any other classification or characteristic protected by law.

Federal law requires all employers to verify the identity and employment eligibility of every person hired to work in the United States, refer to E-Verify poster. View the employee rights and responsibilities under the Family and Medical Leave Act (FMLA). In compliance with the Drug Free Workplace Act of 1988, the Company is committed to a work environment that is free from the effects of alcohol and controlled substances, and free from the abuse or inappropriate use of prescribed and over-the-counter medications. The Company requires employees to be subject to drug and alcohol testing that is job-related and consistent with business necessity, regulatory requirements and applicable laws. Testing Information Tests are only administered to referred candidates. More information about our tests and the testing process can be found HERE. A written [paper and pencil] test will be administered. A test using a computer with keyboard will be administered. A hands-on skills test will be administered. A physical ability test will be administered. E-mail will be the method of contact with job applicants for test scheduling. Please be sure to check your e-mail regularly so that you receive scheduling notifications for testing and updated job information.

Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Production Trainee REPOST (Redhawk) in Tempe, AZ vacancy
  •  ...CMI Group in Tempe, AZ is seeking Gear & Spline CNC Operators and apprentice-level trainees. Applicants must be U.S. citizens or valid permanent residents and be able to work full-time in a fast-paced aerospace and defense manufacturing environment. The role involves... 
    Traineeship
    Permanent employment
    Full time
    Apprenticeship
    Day shift

    CMI Group

    Tempe, AZ
    4 days ago
  •  ...DH Pace Company in Tempe, AZ, is seeking an Entry Door Installer Trainee to ensure safe and accurate installation of doors and hardware. This role offers a commitment to quality workmanship in a team environment. The ideal candidate should be able to lift 100 pounds and... 
    Traineeship

    DH Pace

    Tempe, AZ
    4 days ago
  •  ...DH Pace Company is seeking Commercial Door Technician Trainees in Tempe, AZ. The role includes servicing various commercial doors and door hardware while ensuring safety at all times. A valid driver’s license is required along with the ability to safely lift 100 lbs overhead... 
    Traineeship

    DH Pace

    Tempe, AZ
    4 days ago
  •  ...DH Pace Company, Inc. in Tempe, AZ, is looking for Commercial Door Technician Trainees. Candidates must be able to safely lift 100 pounds and possess a valid driver's license. Experience with commercial doors and related hardware is a plus. The role includes servicing... 
    Traineeship

    DH Pace

    Tempe, AZ
    14 hours ago
  •  ...CNC Operators in Tempe, AZAerospace & Defense ManufacturingLooking for experienced gear & spline machinists and apprentice level trainees that would like to learn! Pay would be based on level of related experience.Location: Kimberly Gear & Spline - 1515 W 17th St, Tempe... 
    Traineeship
    Permanent employment
    Full time
    Apprenticeship
    For subcontractor

    Cmi-Group-Aerospace-

    Tempe, AZ
    2 days ago
  • DH Pace Company in Tempe, AZ, is seeking Commercial Door Technician Trainees for an entry-level role. This position involves servicing, installing, and maintaining commercial doors and door hardware. Candidates should be able to safely lift 100 pounds and possess a valid... 
    Traineeship

    DH Pace Company

    Tempe, AZ
    2 days ago
  •  ...additional service requests to the Service Advisor Monitor repair time and update service advisor Assist in mentoring technician trainees Attend company and factory training and keep current with factory technical bulletins Examine and diagnose vehicles Discuss repairs... 
    Traineeship

    Acura Of Tempe

    Tempe, AZ
    4 days ago
  •  ...commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in...  ...Pace Company, Inc. is seeking to hire an Entry Door Installer Trainee in Tempe, AZ. This Entry Door Installer will be responsible for... 
    Traineeship
    Temporary work
    For contractors
    Immediate start
    Flexible hours

    DH Pace

    Tempe, AZ
    2 days ago
  •  ...additional service requests to the Service Advisor Monitor repair time and update service advisor Assist in mentoring technician trainees Attend company and factory training and keep current with factory technical bulletins Contact To inquire see Todd Mohr or Abel... 
    Traineeship

    Acura-of-Tempe

    Tempe, AZ
    4 days ago
  •  ...commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in...  ...Pace Company, Inc. is seeking to hire Commercial Door Installer Trainees in Phoenix and the surrounding areas. If you have experience... 
    Traineeship
    Temporary work
    For contractors
    Immediate start
    Flexible hours

    DH Pace

    Tempe, AZ
    a month ago
  •  ...in Tempe, Arizona, is seeking a technician to examine and diagnose vehicles, providing labor estimates and assisting in mentoring trainees. The role demands solid dealership experience and an operator driver's license. Candidates will enjoy a fully air-conditioned shop... 
    Traineeship

    Acura-of-Tempe

    Tempe, AZ
    4 days ago
  •  ...Position Summary Wraps and labels meat products using wrapping machine. Stocks display cases and operates meat grinder. Cleans and sanitizes meat department, including meat room, cooler, equipment, and utensils. Restocks supplies. We offer a comprehensive package... 
    Temporary work

    Costco Wholesale Corporation

    Tempe, AZ
    5 days ago
  • Job Description Job Description Benefits: Bonus based on performance Company car Company parties Competitive salary Dental insurance Health insurance Paid time off Training & development Vision insurance We are seeking a skilled and motivated...
    Work from home

    Miracle Method of Tempe

    Tempe, AZ
    7 days ago
  • $20 - $22 per hour

     ...TO: Technician Supervisor SUMMARY: The Pharmacy Technician Trainee is responsible for assisting the Pharmacist with filling orders...  ...in accordance with company guidelines. Report product incidents as required in accordance with company policy. Participate... 
    Traineeship
    Hourly pay
    Local area

    Aspen Infusion

    Chandler, AZ
    3 days ago
  •  ...You are a seasoned Platform or Pioneer Driller who takes pride in the safe, precise, and efficient operation of production drilling equipment within a developing large open‑pit mining environment. With hands‑on experience across a variety of drill types, you consistently... 
    Contract work
    Live out
    Night shift
    Day shift

    Ledcor Group

    Tempe, AZ
    4 days ago
  • A leading mining services provider in Tempe, Arizona, is seeking an experienced Platform or Pioneer Driller. In this role, you will operate various drilling equipment, ensuring adherence to safety standards and operational excellence. The position requires minimum one ...

    Ledcor Group

    Tempe, AZ
    4 days ago
  • $20 - $25 per hour

     ...Pharmacy Technician The Pharmacy Technician or Pharmacy Technician Trainee will support the preparation, labeling, and packaging of sterile injectable products in accordance with FDA regulations, cGMP requirements, and USP / standards. This role works under the supervision... 
    Traineeship
    Hourly pay
    Full time

    Medivant Healthcare

    Chandler, AZ
    2 days ago
  •  ...according to specifications Read and interpret blueprints, engineering drawings, and work orders to determine machine setup and production requirements Select and install appropriate tooling and fixtures on the press brake machine Adjust machine settings such as... 
    Currently hiring
    Shift work
    Day shift

    SVS Group

    Tempe, AZ
    a month ago
  • $32 - $40 per hour

     ...Production Supervisor I A: Tempe, AZ 85282 Shift 1: Hours 4 am - 12:30 pm Monday through Friday Must be open to Saturday work and overtime. Pay Rate is $32.00 - $40.00 per hour. Candidates who are submitted at the higher end of the range need to superstars with... 
    Hourly pay
    Full time
    Monday to Friday
    Shift work

    Netpace

    Tempe, AZ
    2 days ago
  • $70,000 - $80,000 per day

     ...Plant - Tempe, AZ 85282Position Type: Full TimeSalary Range: $70,000.00 - $80,000.00Shift: DAY (12hr) - 6:00am-6:00pm Overview A Production Supervisor will lead a high-performing production team in a state‑of‑the‑art dairy manufacturing facility. The role drives operational... 
    Work at office
    Shift work
    Night shift

    UDA

    Tempe, AZ
    5 days ago
  • $3,000 per month

     ...quality standards.Operate welding equipment, hand tools, grinders, and fabrication machinery safely and effectively.Complete required production and quality documentation.Identify and report non-conforming materials, defects, or process issues.Maintain a safe, clean, and... 
    Hourly pay
    Apprenticeship
    Monday to Friday
    Shift work

    Torrey Holistics

    Tempe, AZ
    4 days ago
  • A prominent construction and mining firm is seeking an experienced Platform or Pioneer Driller in Tempe, Arizona. The ideal candidate will operate various drilling equipment while ensuring safety standards are met. Strong communication and mechanical skills are essential...

    Ledcor Construction, Inc.

    Tempe, AZ
    4 days ago
  •  ...a 3rd Shift Sanitation Operator at our state‑of‑the‑art dairy facility! As the overnight guardian of hygiene, you'll ensure our production environment is spotless and ready for the next day's operations. From deep cleaning equipment to maintaining immaculate work areas... 
    Weekly pay
    Immediate start
    Monday to Friday
    Flexible hours
    Night shift

    Safeway

    Tempe, AZ
    4 days ago
  • $22 per hour

    Multi-Site Service Technician (The Hyve/Hudson) Join to apply for the Multi-Site Service Technician (The Hyve/Hudson) role at Mark-Taylor, Inc. Mark-Taylor is the region's longest-standing investment manager, developer and owner of Class-A multifamily real estate on behalf...
    Hourly pay
    Full time
    Shift work

    Mark-Taylor Residential

    Tempe, AZ
    4 days ago
  •  ...experience with setups, blueprint reading, and inspection, along with the ability to troubleshoot and maintain consistent quality in a production environment. Key Responsibilities Set up and operate CNC milling machines to produce parts per blueprints and specifications... 
    Permanent employment
    Full time
    Temporary work
    Apprenticeship
    Shift work

    Kamatics Corp. Defunct

    Tempe, AZ
    4 days ago
  • Job Description SUMMARY Mortenson is currently seeking a Carpenter I that will be responsible for the construction and repair of wood and wallboard fixtures in compliance with local building codes and general construction principals. RESPONSIBILITIES...
    Temporary work
    H1b
    Local area

    M. A. Mortenson

    Tempe, AZ
    1 day ago
  •  ...Responsibilities: Lead the team for any drumming and dumping activity as required. Request and maintain blends for drumming/dumping production. Monitor machines Troubleshoot Inspect drumming/dumping areas, utensils, and equipment to ensure sanitation standards... 
    Immediate start
    Flexible hours

    Sun Orchard Juicery

    Tempe, AZ
    4 days ago
  • Description Read and interpret mechanical drawings and router instructions Uses gages and measuring instruments to meet tolerance requirements. Setup and machine parts to blueprints and/or work instructions Properly and safely selects, aligns, secures and removes holding...
    Contract work
    Day shift

    Turbineaero-Engines-Technics

    Tempe, AZ
    5 days ago
  • $22 - $24 per hour

    Join to apply for the Multi-Site Service Technician (San Capella - POD1) role at Mark-Taylor, Inc. 1 day ago Be among the first 25 applicants Join to apply for the Multi-Site Service Technician (San Capella - POD1) role at Mark-Taylor, Inc. Get AI-powered advice on this...
    Hourly pay
    16 hours
    Full time
    Shift work

    Mark-Taylor Residential

    Tempe, AZ
    5 days ago
  •  ...Moulding Processor | Moulder Operator is responsible for processing moulding materials and operating woodworking equipment used in the production of custom mouldings and architectural millwork products. This role supports production efficiency and product quality by ensuring... 

    Door Works

    Tempe, AZ
    19 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Production Trainee REPOST (Redhawk). Be the first to apply!