Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Lathe Operator

United Rolls Inc.

Lathe OperatorSummary Job Description: Responsible for running lathe machines. This involves tasks related to set-up, machine operation, and disposing of chips as required.Tools and Equipment: lathes, variety of cutters and hand tools, chip pushers, steady rests, cranes, shovels, scale, tape measure, and brooms. This list is not all inclusive.Job Functions and Functional Job Task ElementsResponsible for turning necks, facing, centering, etc -finishing lathe-smaller finer cuts-customer centers, etc.An overhead crane is used on these machines to set rolls and take out chip boxes.The employee can hook up the chain for the chip box, by squatting to the level of the chain and not having to lift it to place it on the crane hook.Finishing Lathe- the employee needs to make an average of 4 tools changes per shift on this machine. Based on the design of the machine, the tool change is made between knee and waist level, and some have easier leverage than others.They weigh between 10-40#s and are handled on an infrequent basis per hour.Once set-up is completed, the employee runs the machine using automatic controls between waist and chest level with minimal coordination of bilateral hands.When the machine is running, the employee is only required to supervise the operation and dislodge chips on an occasional to frequent basis per hour.Chips are pushed by climbing on 2 steps and using a chip pusher to dislodge the chips while using a partial squatting motion in the standing position.Chips can also be pushed from a vertical position at ground level and this mostly involves using bilateral arms.Some lathes do not have hydraulics to move the rolls on the machine.The rolls have to be locked or unlocked from their location by using a variety of cranks, wrenches, etc.This involves increased use of bilateral upper extremities with twisting of the trunk. Need to be able to push and pull with at least 50#s of force to use the tools.To apply drivers to roll may be required to lift up to 90# waist level to neck of roll several times each month.Rough Lathe-needs to be able to lift a 50# tool without a jib crane and place it at 28 inches off the floor from the left side and make sure it fits in the slot for the tool.There is only a space of 2 feet on the side of the insert, so that the employee would not be able to stand in front of it and perform this task.Also need to be able to handle a chip pusher that is 10 feet and 8 inches long and weighs 15# on an occasional to frequent basis per hour.Need to be able to push chips that are approximately 12 feet away.Dual Compound -the cutters on this machine need to be mounted twice the number of times as a regular lathe as they cut from both ends.The parts are mounted sideways from the right and the left.On one side the part is mounted 25 inches off the floor from approximately 2 feet away and from 6 inches away on the other side.Do not need to use a chip pusher on this machine as they move into the underground bin by themselves, but the employee needs to be able to use a broom to knock them down with minimal force on an infrequent to occasional basis per hour.Note: This job description is not intended to be all-inclusive. The employee may be required to perform other duties as assigned.If you meet the requirements above and are interested in joining our team, please apply with your updated resume. We look forward to reviewing your application!RequirementsShift: 8 hours regular shifts and 12 hours over-time shifts. Breaks: 30 minute lunch.Flooring: Cement, wooden platforms, grates, rubber mats.Environment: Machine shop environment. Need to be careful with other employees while moving overhead cranes in the vicinity.Safety Equipment: Hard hat, gloves, safety glasses, and steel-toe shoes.Strength Range: Medium-Heavy strength range.

Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Lathe Operator in Canton, OH vacancy
  •  ...CNC Lathe OperatorUnited Rolls Incorporated is a global leader in spun cast roll manufacturing, supporting hot strip, cold strip, plate...  ...a 401(k) with company contribution.Position SummaryA CNC Lathe Operator sets up, operates, and monitors computer-controlled lathes to... 
    Suggested
    Shift work

    United Rolls Inc.

    Canton, OH
    3 days ago
  •  ...Job Description Job Description Overview We are seeking a skilled Bobst Die Cutter Operator to join our dynamic team in Canton, OH. In this role, you will be responsible for operating and maintaining Bobst die cutting machines to produce high-quality products that... 
    Suggested
    Flexible hours

    Paragraphics Printing

    Canton, OH
    13 days ago
  •  ...CNC Lathe Operator Safely and effectively setup and operate CNC Lathes, manufacturing precision hardware from blueprints and existing programs. Principal responsibilities include, but are not limited to, the following: Complete all setups and efficiently run moderate... 
    Suggested
    Shift work

    Stolle Machinery

    North Canton, OH
    14 hours ago
  • $38.22k

     ...materials to be machined. Procure or make jigs, fixtures, or machine attachments, required for the job. Set up, program, and operate machine tools, adjusting stops, feed and speed for efficient machining. Machine parts to precision tolerances and specified finishes... 
    Suggested
    Hourly pay
    Apprenticeship

    Metallus

    Canton, OH
    19 hours ago
  •  ...events and recognition awardsEmployee wellness initiativesEmployee feedback and suggestion forums Job Description: As a Machine Operator, you will be expected to maintain and monitor our machines to make sure they continue to function properly. You will gain hands-on... 
    Suggested
    Shift work
    Night shift

    Superior Dairy

    Canton, OH
    14 hours ago
  •  ...machine, equipment, or programming problems and discrepancies. Operate CNC machines by entering commands to retrieve preprogrammed...  ...like instruments. Set up and operate machine tools such as lathes, milling machines, EDM, boring machines, radial drill presses,... 
    Work experience placement

    Robin Industries

    North Canton, OH
    14 hours ago
  •  ...milling machines. This involves tasks related to set-up, machine operation, and disposing of chips as required. Skills and Knowledge:...  ...profilometers. Have a minimum of 2 years' experience on finishing lathes and 2 years on milling machines. Possess strong computer... 

    United Rolls Inc.

    Canton, OH
    2 days ago
  •  ...CNC Machinist A CNC (Computer Numerical Control) machinist operates and programs machine tools such as lathes, mills, and grinders that are controlled by a computer to produce precision metal parts. The CNC Machinist will operate machine tools to fabricate and manufacture... 
    Apprenticeship
    Work experience placement
    Local area

    Precision Component Industries , LLC

    Canton, OH
    18 hours ago
  •  ...Job Description Job Description JOB SUMMARY : Program, Setup, & Operate a CNC Lathe Machine to perform one or more machine functions hard turning metal work pieces. Maintain quality and safety standards; keeping accurate records and maintaining equipment and supplies... 
    Shift work

    Stolle Machinery Company

    North Canton, OH
    19 days ago
  •  ...Maintain all service levels by being Prepared, Welcoming, Meet the Needs & Be There for all our customers, this includes all operational checklist task and meeting customers emotional and practical needs. Responsible for providing an exceptional service experience... 
    Part time

    David's Bridal

    Canton, OH
    3 days ago
  •  ...statement, "to create the most enjoyable shopping experience possible for our Guests." The Seamstress/Tailor performs a variety of operational tasks to support the execution of alterations in the store, including the hemming of jeans and pants.Essential Duties and... 
    Hourly pay
    Part time
    Local area
    Flexible hours
    Day shift
    Afternoon shift

    Buckle LLC

    Canton, OH
    14 hours ago
  •  ...Job Description Job Description JOB SUMMARY : Program, Setup, and Operate a CNC Horizontal Milling Center or CNC Boring Mill to perform one or more machining functions on metal work pieces while maintaining quality and safety standards; keeping accurate records... 

    Stolle Machinery Company

    North Canton, OH
    19 days ago
  •  ...Aerotek - - Responsibilities: Operate Mazak CNC machines and other CNC equipment; Set up CNC machines including fixturing/tooling/offsets; Modify programs at the machine using G & M code and conversational controls; Read GD&T and blueprints to meet specs; Troubleshoot... 

    Aerotek

    North Canton, OH
    3 days ago
  • $23 - $25 per hour

     ...PM 11 PM Mon Fri Midnights Sun Thur 11p-7aMUST HAVE EXPERIENCE WITH MILL MACHINIST Pay Range is $23 $25 Per Hour Duties: Set up and operate milling machines to fabricate parts according to blueprints or specifications Monitor machine operations to ensure proper... 
    Hourly pay
    Shift work
    Night shift
    Afternoon shift

    Snelling

    Canton, OH
    3 days ago
  •  ...metal parts by automatic machine tools, equipment, or systems.Principle Responsibilities Include:Determine the sequence of machine operations and select the proper cutting tools needed to machine work pieces into the desired shapes.Revise programs or tapes to eliminate... 
    Weekend work
    Afternoon shift

    Stolle Machinery

    North Canton, OH
    4 days ago
  • $28 - $35 per hour

     ...seeking a skilled CNC Machinist to join our manufacturing team. This hands-on role involves setting up, operating, and making adjustments to CNC mills and/or lathes to produce precision-machined components to specifications. The ideal candidate will have experience with... 
    Hourly pay
    Shift work
    Day shift
    Afternoon shift

    EverStaff

    Canton, OH
    4 days ago
  •  ...changing out cutters on Milling machines.Responsible for turning necks, facing, centering, etc on Lathe machines.Perform all tool changes on machines.Monitor CNC machine operation carefully to uphold close tolerances.Use of Jib cranes and dollies.Dislodge chips and handle... 
    Local area

    NESCO Inc

    Canton, OH
    19 hours ago
  • $25 - $35 per hour

     ...manufacturing company seeks to hire experienced CNC Machinists who are capable of setting-up, programming / editing, and operating various CNC Lathes & Milling Machines. Responsibilities: Set-up and operate various CNC Lathes and Milling Machines. Perform CNC... 
    Permanent employment
    Full time
    Shift work

    Integrity Technical Services

    Canton, OH
    1 day ago
  • $23 - $25 per hour

     ...Midnights Sun - Thur 11p-7a MUST HAVE EXPERIENCE WITH MILL MACHINIST Pay Range is $23 - $25 Per Hour Duties: - Set up and operate milling machines to fabricate parts according to blueprints or specifications - Monitor machine operations to ensure proper... 
    Hourly pay
    Shift work
    Night shift
    Afternoon shift

    Snelling

    Canton, OH
    18 hours ago
  • $41.6k - $58.24k

     ...programs, perform complete machine setups and tear downs, and operate Mazak and other CNC machines while using GD&T and blueprints daily...  ...mills in a job shop setting. Experience operating Mazak CNC lathes and other Mazak machines. Proficiency in machine-side... 
    Weekly pay
    Permanent employment
    Temporary work
    Apprenticeship
    Shift work
    Day shift
    Afternoon shift

    Aerotek

    Canton, OH
    2 days ago
  •  ...systems including AC/DC motors, generators, pumps, gearboxes, turbines, and more. The ideal candidate will use manual machinery, such as lathes, mills, shapers, drill presses, grinders, and will also be involved in electroplating processes. This position requires a strong... 
    Contract work
    Temporary work
    For contractors

    Edmonson Electric Inc

    Massillon, OH
    19 hours ago
  • $20 - $26 per hour

     ...Job Description Job Description Job Title: Machine Operator (Metals) Job Description Join a growing metals manufacturing team as a Machine Operator, working with brake presses, CNC equipment, saws, plasma cutting machines, and turret/punch presses to produce high... 
    Weekly pay
    Permanent employment
    Full time
    Contract work
    Temporary work
    Monday to Friday
    Shift work
    Night shift
    Afternoon shift

    Aerotek

    Canton, OH
    4 days ago
  • $20 - $25 per hour

     ...Job Description Job Description Canton Mancan is currently looking for an experienced CNC Operator for a local company. If you have CNC experience and are looking for your next opportunity, we’d love to hear from you! Pay:$20-$25 BOE Schedule:7a-3:30pm Responsibilities... 
    Temporary work
    Work at office
    Local area
    Monday to Friday

    Mancan

    Canton, OH
    21 days ago
  •  ...Mill OperatorJob Overview: We are currently seeking a skilled and reliable Mill Operator to join our team. This is a great opportunity for individuals who enjoy working in a fast-paced environment and are looking to contribute to the success of our organization.Summary... 
    Shift work
    Night shift

    United Rolls Inc.

    Canton, OH
    3 days ago
  • Akron-Coffee Roasters Team Member!United Concessions Group (UCG) is now hiring Team Members to join their team at Akron Coffee Roasters located inside of the Akron-Canton Airport.Location Description: Akron Coffee Roasters is a full-service restaurant and bar offering ...
    Full time
    Local area
    Immediate start

    Akron-Canton Airport Hospitality

    North Canton, OH
    4 days ago
  •  ...Job TitleSummary Job Description: Responsible for final finishes running machine. This involves tasks related to set-up, machine operation, and disposing of chips as required.Job Functions and Functional Job Task ElementsTask 1: Operate MachineReceive metal rolls from... 
    Shift work

    United Rolls Inc.

    Canton, OH
    3 days ago
  • $30 per hour

     ...Job Description Job Description CNC Vertical Mill Operator - 1st Shift - Pay up to $30/hr Job Description: We are seeking a skilled CNC Vertical Mill Operator to join our team in Canton, OH. You will be working in a job shop environment with a focus on CNC machining... 
    Weekly pay
    Permanent employment
    Apprenticeship
    Day shift
    Afternoon shift

    Aerotek

    North Canton, OH
    4 days ago
  •  ...connected, consumer-centric world. Join us in connecting people to commerce in this vital, rewarding role.Join our team as a Press Brake Operator, where your skills, precision, and attention to detail will play a key role in producing high-quality fabricated parts for our... 
    Full time
    Work experience placement
    Night shift
    Day shift

    Diebold Nixdorf

    North Canton, OH
    3 days ago
  •  ...exciting? You’ll own complex hard‑turning work on Mazak and DMG Mori lathes, where your mastery of Mazatrol and G/M‑code turns prints into...  ...What will you handle day to day? Program, set up, and operate CNC lathes for hard‑turning across varied materials; preferred... 
    Shift work

    Stolle Machinery Company - USA

    Canton, OH
    9 days ago
  •  ...latest program specs and blueprints. You determine the sequence of operations, the final dimensions required, and the numerical control path....  ...and their practical use on the floor. Equipment you’ll operate CNC Mill (3–4 axis VMC) CNC Lathe (2–4 axis) (Mazak)... 
    Shift work

    Stolle Machinery Company - USA

    North Canton, OH
    22 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Lathe Operator. Be the first to apply!