Engineering Technician (Mechanical & Integration)
$38.39 per hourBowhead
Overview Engineering Technician(Mechanical & Integration) (H40-2026-26546) Bowhead seeks an Engineering Technician(Mechanical & Integration) on a newly awarded contractsupporting Battle Management System (BMS) family of projects.In this role, we are seeking a hands-on Engineering Technician to lead the physical, structural, and mechanical integration of BMS hardware across various tactical platforms. This position is heavily hardware/mechanically focused, prioritizing physical buildouts, custom mounts, structural cable routing, and hands-on fabrication, while cross-training to assist with basic electronics, software loading, and laboratory network configurations. Travel of 20% annually can be expected. We are looking to hire at either an ET4 or ET5, dependent on interview process and experience: ET4 will start at $38.39/hr ET5 will start at $46.96/hr Responsibilities The Engineering Technician(Mechanical & Integration) shall provide hands-on Engineering Technician with a hardware/mechanically focused competency, prioritizing physical buildouts, custom mounts, structural cable routing, and hands-on fabrication, while cross-training to assist with basic electronics, software loading, and laboratory network configurations. Duties & responsibilities include, but are not limited, to the following: Physical Integration & Platform Modification: Read and work from mechanical technical drawing packages, CAD blueprints, and interface documents to physically mount, secure, and integrate BMS hardware onto tactical vehicles, vessels, or aerial platforms. Cable and Harness Fabrication : Assemble, route, secure, and inspect complex cables and wiring harnesses according to electrical standards. Confirm physical connector configurations match designs. SIL Preparedness & Organization : Lead the physical setup, structural layouts, mounting, and cable-routing of systems at the NSWCDD Dahlgren SILs. Maintain laboratory cleanliness, physical workspace safety, tool inventories, and consumable stock, ensuring the SIL is prepared for both internal project test events and general system testing executed by the BMS test team. Manned & Unmanned Domain Integration: Assist in the structural and mechanical integration of manned and unmanned systems (UxS/UAS) and C-UAS hardware mounts across all domains (air, land, and maritime). Cross-Functional Support : Cross-train to support electronic and network technicians, assisting with basic graphic user interface (GUI) software installation, GPS simulator setups, and basic line-of-sight communication diagnostics during heavy test cycles. Qualifications High school diploma or passing score on the General Education Development (GED) exam Seven (7) years of full-time professional experience working as an Engineering Technician in providing technical support related to the design, development, production, or testing directly in support of the Department of Defense. Five (5) years of hands-on testing and troubleshooting of electronic systems in a professional engineering environment. Experience in developing and testing solutions to solve technical problems in research and development, manufacturing, inspection, and maintenance; while assisting engineers in inspecting products, conducting tests, and collecting data. Experience with following published user manuals and maintenance documentation. In addition, experience reading, editing, and creating electrical drawings and system schematics Experience with hands-on mechanical fabrication, cabling, electro-mechanical assembly, and platform-level systems integration in a professional aerospace or defense engineering environment. Intermediate to advanced level skills in Microsoft Office software suite - Word, Excel, Outlook, PowerPoint Ability to communicate effectively with all levels of employees and outside contacts Strong interpersonal skills and good judgment with the ability to work alone or as part of a team Desired Certifications & Qualifications IPC/WHMA-A-620 (Requirements and Acceptance for Cable and Wire Harness Assemblies) IPC-A-610 (Acceptability of Electronic Assemblies) We are looking to hire at either an ET4 or ET5, dependent on interview process and experience: ET4 will start at $38.39/hr ET5 will start at $46.96/hr Please note that the salary information is a general guideline only. Bowhead considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer. Physical Demands: Must be able to lift up to 50 pounds Must be able to stand and walk for prolonged amounts of time Must be able to twist, bend and squat periodically SECURITY CLEARANCE REQUIREMENTS: Must be able to obtain and maintain a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location. #J-18808-Ljbffr Bowhead
- Bowhead seeks an Engineering Technician (Mechanical & Integration) to lead physical buildouts, mounts, and cable routing for BMS hardware across tactical platforms at Dahlgren. Heavy hands-on fabrication with cross-training in basic electronics and software loading is...Suggested
$38.39 - $46.96 per hour
BOWHEAD IS SEEKING AN Engineering Technician (Mechanical & Integration) to lead the physical buildouts, mounts, and cable routing for the Battle Management System across multiple platforms. The role emphasizes hands-on fabrication and mechanical integration, with cross...Suggested- ...highly skilled Computing Infrastructure Hardware Integration Technician with experience in assembling mechanical assemblies, handling rack-based computing equipment... ...Collaborate with other technicians and engineers to ensure project goals and objectives are met Provide...Suggested
- ...Engineering Technician IV Agile IT Synergy, LLC is a Subject Matter Expert (SME) based information technology company focused on innovative engineering and integration of relevant technologies combined with effective business practices to deliver complete solutions...SuggestedFull timeContract work
- ...Amentum is seeking an Engineering Technician to perform test, evaluation, integration, and configuration of U. S. Navy Command, Control, Computers, Communications, Cyber, Intelligence, Surveillance, and Reconnaissance (C5ISR) systems. Essential Responsibilities:...SuggestedHourly payContract workInterim roleLocal areaOverseas
- ...Electrical Technician King George, VA 22485; Dahlgren, VA 22448 Description SCCI is seeking an Electrical Technician... ...projects. The successful candidate will work as an integral part of the engineering design teams, as well as with end-users and management throughout...
$95k - $110k
...Introduction HART Technologies, Inc. is looking for an experienced Mechanical Engineer to join our tactical systems development team at the Naval... ..., this position will participate in the installation, integration, and testing of the developed hardware both at NSWCDD and...Hourly payTemporary work$94k - $110k
...HART Technologies, Inc. is looking for a mid-level Mechanical Engineer to join our tactical systems development team at the Naval Surface Warfare... ...unique opportunity. Responsibilities Design, develop and integrate mechanical components in support of tactical programs,...Hourly payTemporary work$86.8k - $198k
...Job Number: R0241755 Mechanical Engineer, Senior The Opportunity Apply engineering physics, engineering mathematics, and materials science... ...experience with FEA analysis 5+ years of experience in the integration of HPM or pulsed power systems into land, air, or shipboard...Full timeContract workPart timeWork at officeLocal areaRemote work$100k - $150k
...Senior Mechanical Engineer Location: Dahlgren, VA (On-Site) This role requires full-time, on-site support in Dahlgren, VA; remote or telework... ...mechanical and thermal stress analysis to ensure system integrity under operational conditions Conduct and support testing...Full timeLocal areaRemote work- ...related to weapons and weapon systems. Education: AS Degree in Engineering, Management or Technology is preferred. Months/Years of... ...lift up to 50lbs. Skills Needed: Knowledge of UAV Hardware integration and fabrication Knowledge of UAV operation, troubleshooting...Full timeContract workRemote work
$38.39 per hour
...Engineering Technician IV We are seeking a highly experienced Engineering Technician IV to support advanced calibration, metrology, and measurement science activities for Navy Research, Development, Test & Evaluation (RDT&E) programs at the Naval Surface Warfare Center...Hourly payInterim role- ...Returning Applicant? Login Now New Job Search Engineering Technician II - Range Operations and Sustainment - PRTR Job Code: 2026:0101-031 Location: Dahlgren Navy Base, VA FT/PT Status: Full Time Business Sector: Facilities Management...Full timeContract workFor contractorsInterim roleWork at office
$27.7 per hour
...performed by employees. Specifications are not intended to reflect all duties performed within the job. SUMMARY: The Engineering Technician II will independently determine and perform operations required to calibrate and certify complex electronic and/or physical...Hourly payWork at office- ...Amentum is seeking a Junior RF Engineering Technician to support our Dahlgren, Virginia team in support of the Naval Surface Warfare Center Dahlgren Division (NSWCDD) Electromagnetic Effects Division . Junior RF Engineering Technician Responsibilities Include:...Hourly payContract workLocal area
- ...Job Title Engineering Support Services Duties Provide engineering support services and oversight in the field for all types of construction projects, including new construction, repairs and renovations. Provide quality assurance oversight of the contractor'...Contract workFor contractors
- ...Engineering Technician III - Range Operations and Sustainment - PRTR Job Code:2026:0101-030 Location:Dahlgren Navy Base, VA FT/PT Status:Full Time Business Sector:Facilities Management and Operations Job Description CONTRACT PENDING AWARD The Engineering...Full timeContract workInterim roleWork at office
$49k - $59k
...Electronics Technician Position #386 Location: Dahlgren, VA/NSWCDD — Main Gate office, onsite Employment type: Full-time Clearance Required: Secret REQUIRED Compensation: $49K–$59K Education & Experience Requirements ~ Associate's degree in Electronics...Full timeTemporary workWork at officeFlexible hours- ...MECHANICAL ENGINEER - TEST AND EVALUATION (AT): The Mechanical Engineer - Test and Evaluation position is responsible for supporting manufacturing... ...Perform in all phases of hardware design, development, integration/implementation, and analysis Plan and conduct engineering...For contractorsWork at officeRemote work
$75k - $110k
...Overview MECHANICAL ENGINEER - TEST AND EVALUATION (AT): The Mechanical Engineer - Test and Evaluation position is responsible for... ...Perform in all phases of hardware design, development, integration/implementation, and analysis Plan and conduct engineering...Full timeContract workTemporary workPart timeFor contractorsWork experience placementWork at officeRemote work- Tatitlek Management Services, Inc. (TMSI) seeks an Engineering Technician II in Dahlgren, VA to independently calibrate and certify complex test equipment with NIST traceability, ensuring precise measurements and reliable results across projects. The role requires at least...
- The Tatitlek Corporation is seeking an Engineering Technician II who will independently calibrate and certify complex electronic and mechanical test equipment, ensuring traceability to NIST (or constants). The role emphasizes measurement accuracy and proper documentation...
$87k - $125k
...Overview Mechanical Engineer LOCATION: Dahlgren, VA JOB STATUS: Full-time CLEARANCE: SECRET CERTIFICATION: n/a TRAVEL: Up to 20% SALARY RANGE: $87k - $125k Astrion has an exciting opportunity for a Mechanical Engineer to join our team supporting...Full time$30.98 per hour
...Machinist (Engineering Technician III) Bowhead is seeking a qualified Machinist to join the Machine Shop team at the Naval Surface Warfare Center Dahlgren Division (NSWCDD) in Virginia. This position offers a unique opportunity to collaborate with the U.S. Navy in the...Hourly payWork at officeShift work$38.39 per hour
...techniques. There may be a need to assist the shop lead with estimating time and material on certain projects. What We Offer Engineering Technician IV position pays $38.39 per hour, plus $4.93 per hour for H&W (Health and Welfare) 28 paid days off per year. Paid...Hourly payWork at office$38.39 per hour
The Tatitlek Corporation is seeking an experienced Engineering Technician IV to support advanced calibration and measurement activities at the Naval Surface Warfare Center, Dahlgren Division. This senior-level role demands deep technical expertise to conduct complex calibration...Hourly pay$40 - $50 per hour
...Printer Technician DNI Emerging Technologies is seeking a Printer Technician to support the Air Force Joint Warfare Analysis Center (JWAC) under the JWAC IT Services Contract. The technician handles equipment staging, inventory, configuration, workstation installation...Hourly payContract workTemporary workWork at officeRelocation- ...exploratory testing, and contribute to high‑value software increments in a fast-paced agile environment. The role emphasizes collaboration with developers to refine stories, define test criteria, and integrate testing into the CI/CD pipeline. #J-18808-Ljbffr Zekiah TechnologiesInterim role
- ...A defense contracting corporation is seeking a Principal Engineer to provide senior-level systems engineering and analysis support to various military and governmental customers. Candidates must have extensive experience in US Navy surface warfare and specific expertise...
$86.8k - $198k
Mechanical Engineer, SeniorThe Opportunity:Apply engineering physics, engineering mathematics, and materials science principles to support... ...experience with FEA analysis5+ years of experience in the integration of HPM or pulsed power systems into land, air, or shipboard...Full timeContract workPart timeWork at officeLocal areaRemote work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Engineering Technician (Mechanical & Integration). Be the first to apply!
- design technologist Dahlgren, VA
- engineering technician Dahlgren, VA
- technical designer Dahlgren, VA
- mechanical solidworks Dahlgren, VA
- mechanical installation Dahlgren, VA
- lead engineering technician
- engineering technician contract
- senior engineering technician
- design technologist
- structural engineering technician


