Maintenance Technician

Maintenance Technician

The Maintenance Technician installs, maintains, troubleshoots, and repairs a wide range of mechanical and electrical equipment in a high-volume plastic extrusion manufacturing environment. This role focuses on identifying root causes of equipment failures, performing corrective and preventive maintenance, and supporting safe and reliable plant operations in a fast-paced, 24/7 facility.

Responsibilities

• Install, maintain, troubleshoot, and repair production equipment including extruders, controls, drives, gear boxes, pneumatics, hydraulics, synchronous belts, v-belts, sheaves, roller chains, sprockets, conveyor systems, motors and gearboxes, loaders, various pumps, compressed air systems, blenders, hoists, and other equipment associated with plastic extrusion.
• Diagnose mechanical and electrical failures to the root cause and perform necessary repairs to restore safe and efficient operation.
• Provide clear recommendations for procedural or equipment changes to help prevent repeat failures and improve equipment reliability.
• Safely troubleshoot and repair electrical systems, including 3-phase and single-phase 480 V power in an industrial environment.
• Troubleshoot and repair electrical components such as surface contact heaters, ceramic heaters, solid state relays (SSRs), variable frequency drives (VFDs), contactors, motor starters, relays, breakers, temperature controllers, mercury contactors, and fuse blocks.
• Troubleshoot control loops and systems that use simple AC, DC, or mA control signals, ensuring accurate and stable operation.
• Read and interpret electrical prints and diagrams to support efficient troubleshooting and repairs.
• Troubleshoot PLCs to support reliable automation and control of production equipment.
• Align equipment such as motors, gearboxes, couplings, and pulleys using magnetic dial indicator methods and straight-edge methods to ensure proper operation and reduce wear.
• Perform maintenance and repairs on overhead cranes from 1 to 10 tons, including hoist maintenance, bridge maintenance, and motor and electrical repair.
• Maintain and repair mobile equipment such as forklifts, tugs, and small vehicles to ensure safe and reliable operation.
• Operate a forklift safely as part of daily maintenance and material handling activities.
• Work comfortably at heights using ladders, scaffolding, and catwalks, and perform tasks in tight or confined spaces as required.
• Apply good housekeeping practices in all work areas and maintain a clean, organized, and safe work environment.
• Perform calculations for mechanical fabrication and installations, and apply electrical equations such as Ohm's law for diagnostics and repairs.
• Use tools and equipment such as multi-meters, amp meters, oxy-acetylene welding and cutting equipment, arc welding equipment, drills, taps, hand and power tools, drill presses, pipe threading machines, and forklifts.
• Support continuous plant operations in a fast-paced, 24/7 manufacturing environment by responding to maintenance needs promptly and effectively.
• Follow all safety procedures and guidelines while working around high temperatures, moving machinery, and elevated work areas.

Essential Skills

• At least 5 years of experience in an industrial maintenance environment.
• Strong mechanical and electrical troubleshooting skills in a manufacturing setting.
• Demonstrated knowledge and hands-on experience with 3-phase and single-phase 480 V power systems.
• Ability to safely troubleshoot and repair electrical components including heaters, SSRs, VFDs, contactors, motor starters, relays, breakers, temperature controllers, mercury contactors, and fuse blocks.
• Ability to troubleshoot control loops and systems using AC, DC, and mA control signals.
• Ability to read and interpret electrical prints and diagrams accurately.
• Experience troubleshooting PLCs in an industrial environment.
• Experience aligning motors, gearboxes, couplings, and pulleys using magnetic dial indicator and straight-edge methods.
• Experience maintaining and repairing overhead cranes (1 to 10 tons), including hoists, bridges, and related motors and electrical systems.
• Experience with maintenance and repair of mobile equipment such as forklifts, tugs, and small vehicles.
• Forklift operating experience and ability to drive a forklift safely.
• Comfort working at heights on ladders, scaffolding, and catwalks, and in tight or confined spaces.
• Good housekeeping habits and a strong work ethic.
• Ability to perform mechanical calculations for fabrication and installation.
• Ability to apply electrical equations such as Ohm's law for diagnostics and repair.
• Working knowledge of multi-meters and amp meters for electrical testing.
• Working knowledge of oxy-acetylene welding and cutting, and arc welding.
• Working knowledge of drilling, tapping, and the use of hand and power tools.
• Working knowledge of drill presses and pipe threading machines.
• Working knowledge of forklifts, wiring, and conduit installation.
• Ability to frequently lift up to 70 pounds.
• Ability to work in temperatures exceeding 100 degrees.
• Ability to climb stairs and work at heights up to and exceeding 75 feet.
• Ability to thrive in and adapt to a fast-paced, 24/7 manufacturing environment.

Additional Skills & Qualifications

• PLC programming and installation experience is a strong plus.
• Welding certification is preferred.
• Electrical certification is preferred.
• Experience with film blowing equipment is a plus.
• Experience with injection molding equipment is a plus.

Why Work Here?

You join a growing manufacturing operation that values skill development and continuous improvement, offering clear opportunities to advance in both pay and position. The environment rewards initiative, strong work ethic, and problem-solving, giving you the chance to make a visible impact on equipment reliability and plant performance. You work alongside experienced professionals in a setting that encourages learning, cross-training, and long-term career growth.

Work Environment

This role is based in a manufacturing plant in the North Houston area near a major airport, operating in a fast-paced, 24/7 production environment. The facility melts plastic and forms it into plastic liners, creating very hot working conditions, especially in the summer when temperatures can exceed 100 degrees. You work around large plastic extrusion equipment, overhead cranes, mobile equipment, and various mechanical and electrical systems. The position requires frequent lifting, climbing stairs, and working at heights up to and above 75 feet, as well as working in tight spaces. The environment is industrial, hands-on, and safety-focused, with an expectation of maintaining clean and orderly work areas while working efficiently under time-sensitive conditions.

Job Type & Location

This is a Contract to Hire position based out of HOUSTON, TX.

Pay and Benefits

The pay range for this position is $35.00 - $38.00/hr.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

Workplace Type

This is a fully onsite position in HOUSTON, TX.

Application Deadline

This position is anticipated to close on Aug 6, 2026.