Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Refrigeration Field Engineer/Commissioning Agent

Full-time

City Facilities Management (US) LLC

POSITION SUMMARY

The Field Engineer / Commissioning Agent supports the start‑up and commissioning of refrigeration, HVAC, and Energy Management System (EMS) infrastructure for supermarket new construction and remodel projects. This role focuses on executing commissioning activities, verifying system performance, and supporting final system acceptance at client sites.

The Field Engineer / Commissioning Agent reports to the Manager of Field Engineering and works closely with engineering, construction, and client teams to ensure systems are installed, tested, and operating in accordance with project requirements.

KEY RESPONSIBILITIES

Field Support & Commissioning Execution

  • Conduct site visits during construction and remodel phases to inspect installation progress and verify adherence to project scope, design documents, and programming standards.

  • Execute on-site commissioning activities, including point-to-point testing and functional verification of EMS-controlled equipment.

  • Commission HVACR equipment that is newly installed or relocated as part of construction or remodel projects.

  • Provide start-up and commissioning support for refrigeration rack systems in coordination with contractors and manufacturers.

System Evaluation & Documentation

  • Evaluate and document existing RHVAC and EMS systems for integration into capital projects.

  • Prepare interim commissioning reports and final commissioning documentation, identifying exceptions, deficiencies, and out-of-spec conditions.

  • Support resolution tracking in collaboration with the Construction Project Manager and engineering teams.

Controls & Programming Support

  • Verify proper operation, communication, and programming of EMS and RHVAC control systems.

  • Implement minor control wiring modifications and programming adjustments as required to support inspections and commissioning activities.

  • Support EMS programming updates as directed by engineering or field leadership.

Technical Support & Coordination

  • Act as a technical resource for Level 2 refrigeration and EMS-related issues as assigned.

  • Assist with troubleshooting and resolution of system issues both remotely and on-site.

  • Perform minor repairs and system adjustments on HVACR and control components as needed.

  • Collaborate closely with Construction Project Managers, engineering teams, contractors, and vendors to support timely issue resolution.

  • Communicate commissioning status, risks, and outstanding items clearly and professionally to project stakeholders.

REQUIREMENTS AND EXPERIENCE

  • Minimum 3+ years of experience in supermarket construction, commissioning, engineering, or HVACR/controls maintenance

  • Working knowledge of large refrigeration rack systems, including DX, Cascade, Micro DS, and Transcritical CO₂

  • Experience operating and programming Danfoss and/or Emerson supermarket control systems

  • Strong organizational, analytical, and troubleshooting skills

  • Effective oral and written communication skills

  • Valid Driver’s License

  • AutoCAD experience a plus

SKILLS & COMPETENCIES

  • Ability to read and interpret technical drawings, schematics, and specifications

  • Strong attention to detail and documentation accuracy

  • Customer-focused mindset with a professional field presence

  • Ability to work independently while following established processes and direction

  • Comfortable working in machine rooms and field environments that may be loud, dusty, confined, or difficult to access

ABOUT CBES

City Building Engineering Services (CBES) is a leading integrated professional services firm supporting technical requirements and sustainable solutions for the retail and related industries. Utilizing our vast array of in-house resources, CBES experts tackle the most challenging projects from inception to completion, including project design, engineering, construction and commissioning. Our integrated team provides unique value serving our clients and our climate.

WHY SHOULD YOU WORK AT CBES?

CBES is part of a global network of leading professional services, infrastructure management, and data-driven sustainability solutions firms for starters. We offer a generous benefits package that includes 28 days of PTO along with a 401(k) with immediate vesting and company match.

We don’t just hire anyone at CBES; we’re looking for team members with a deep sense of responsibility, an ability to collaborate, a desire to learn and grow, a willingness to always lend a helping hand.

When you join CBES, you’re committing to making a difference. We make a commitment to you too – helping you embark on a career with purpose! Whether through our world-classes training or our Leadership Development framework – CBES cares passionately about the people we hire and ensures that growth is always on the horizon.

Wondering if this is the place for you to take the next step in your career? If you put clients first, care passionately about what you do and are committed to working on a team that respects each other, this is the place for you!

So, if you’re ready to get started, let’s go!

CBES is An Affirmative Action / Equal Opportunity Employer. The Company has a Drug-Free Workplace Policy in effect that is strictly adhered to.

Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the Refrigeration Field Engineer/Commissioning Agent in Torrington, CT vacancy
  •  ...POSITION SUMMARY The Field Engineer / Commissioning Agent supports the start‑up and commissioning of refrigeration, HVAC, and Energy Management System (EMS) infrastructure for supermarket new construction and remodel projects. This role focuses on executing commissioning... 
    Suggested
    Full time
    For contractors
    Interim role
    Immediate start
    Remote work
    Relocation

    City Building Engineering Services (CBES-US)

    Torrington, CT
    4 days ago
  •  ...Back to all jobs Mechanical Manufacturing Engineer ~ Torrington, CT, USA ~85,000-115,000 per year ~ Salary ~ Full Time...  .... Support equipment installation, setup, troubleshooting, commissioning, and production startup. Evaluate existing manufacturing... 
    Suggested
    Full time

    Aptyx

    Torrington, CT
    3 days ago
  • $37.5 per hour

    Tactical Security Officer OpportunityGardaWorld Security Services is now hiring a Tactical Security Officer! Ready to suit up as a Tactical Security Guard? What matters most in a role like this is your ability to read the environment, anticipate risk, and act accordingly...
    Suggested
    Hourly pay
    Work experience placement
    Immediate start
    Shift work

    GardaWorld

    Torrington, CT
    2 days ago
  •  ...Immediate Hiring For Skilled Field Service Technician Join Our Team! We are a high-tech company specializing in machine tools and laser technology. We seek individuals who can tackle new challenges with a fresh perspective, enjoy travel, and are skilled electromechanical... 
    Suggested
    Immediate start

    Veterans Prime, Inc.

    Unionville, CT
    2 days ago
  •  ...premier spaces. What to Expect: The Field Services Technician will support field...  ..., and customer follow-through Commissioning and startup support for i2Systems lighting...  ...and control systems Coordination with engineering, production, and customer teams during... 
    Suggested
    Work at office
    Local area
    Immediate start

    Integrated Illumination System

    Morris, CT
    12 days ago
  •  ...Mechanical Manufacturing Engineer A well-established manufacturer is searching for a highly technical, hands-on Mechanical Manufacturing Engineer to support New Product Introduction (NPI), manufacturing process development, product launches, and ongoing production... 

    gpac

    Torrington, CT
    4 days ago
  •  ...Sr. Process Engineer (Aerospace/Defense) CapstoneONE Search | New Hartford, CT (On-site) We are representing a globally recognized Fortune 500 aerospace/defense manufacturing organization actively seeking a Sr. Process Engineer. This company has been named annually as... 
    Full time

    CapstoneONE Search

    New Hartford, CT
    4 days ago
  • $37.5 per hour

    GardaWorld Security Services is Now Hiring a Tactical Security Officer! Ready to suit up as a Tactical Security Guard? What matters most in a role like this is your ability to read the environment, anticipate risk, and act accordingly. Tell us about how your keen sense...
    Hourly pay
    Work experience placement
    Casual work
    Local area
    Immediate start
    Shift work

    GardaWorld

    Torrington, CT
    17 days ago
  • $32 - $45 per hour

    Hocon Gas - Torrington 106 Harris Dr Torrington, CT 06790, USA Hocon Gas - Torrington 106 Harris Dr Torrington, CT 06790, USA Install propane tanks and related equipment in full compliance with NFPA 58/54 and all state/local regulations. Complete any required state licensing...
    Hourly pay
    Temporary work
    Seasonal work
    Local area
    Immediate start
    Flexible hours

    HOCON GAS

    Torrington, CT
    4 days ago
  • $107k - $154k

     .... Dymax will only contact potential candidates from email addresses in @dymax.com.About UsDymax, part of the Bachmann Chemical & Engineering family of brands is based out of Torrington, Connecticut. Dymax is globally recognized as a pioneer in the development of light-curable... 
    Full time
    Local area
    Work visa

    Dymax

    Torrington, CT
    3 days ago
  • $83k - $119k

     .... Dymax will only contact potential candidates from email addresses in @dymax.com.About UsDymax, part of the Bachmann Chemical & Engineering family of brands is based out of Torrington, Connecticut. Dymax is globally recognized as a pioneer in the development of light-curable... 
    Full time
    Work at office
    Local area
    Work visa

    Dymax

    Torrington, CT
    1 day ago
  • $82k - $136k

    The Manufacturing Engineer is responsible for the design of production tools and /or machines and for developing solutions to support the bearing manufacturing process. A major responsibility is to improve existing manufacturing processes by increasing machine capability... 
    Full time

    RBC Bearings

    Torrington, CT
    3 days ago
  •  ...Job Title: Industrial Engineer Location: Torrington, CT The Industrial Engineer Product Data & BOM Management (Bill of Material...  ...Industrial Engineering, Manufacturing Engineering, or related field. A minimum of 5 plus years of experience in manufacturing,... 
    Work at office

    Jobs via Dice

    Torrington, CT
    1 day ago
  • $5,000 per month

     ...systems, using diagnostic tools and special service equipment Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. Communicate directly with the Service Advisor so... 
    Local area
    Relocation package
    Flexible hours

    Sullivan's Northwest Hills Chrysler Jeep Dodge RAM

    Torrington, CT
    1 day ago
  • $50k

     ...Process Engineer at Cyient DLM Electronics Inc Cyient DLM Electronics Inc, has been a trusted source of electronic manufacturing services...  ...in manufacturing, electronics-manufacturing or similar field. ~ Experience working with AS9100/ISO9001:2015 quality system... 
    Contract work
    Work experience placement
    Work at office

    ALTEK Electronics

    Torrington, CT
    2 days ago
  •  ...independently, while also having experience working well in a team environment. Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics. Track record of high personal productivity. Knowledge of, and adherence to, safety and environmental standards for... 
    Full time

    Midas International, LLC

    Torrington, CT
    1 day ago
  • Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world...
    For contractors
    Work at office

    Securitas Technology

    New Hartford, CT
    10 hours ago
  •  ...Process Engineer We're looking for a Process Engineer to own and improve the production of precision aerospace components by developing manufacturing processes, creating detailed work instructions, and designing the tooling necessary for efficient and quality-driven... 

    gpac

    Torrington, CT
    4 days ago
  • $107k - $154k

     ...will only contact potential candidates from email addresses in @dymax.com. About Us Dymax, part of the Bachmann Chemical & Engineering family of brands is based out of Torrington, Connecticut. Dymax is globally recognized as a pioneer in the development of light-... 
    Temporary work
    Local area
    Work visa

    Bachmann Chemical and Engineering

    Torrington, CT
    3 days ago
  •  ...manufacturing, CAD, machine shop skills. knowledge of grinding theory and bearing technology a plus. Requirements ~ BS in Mechanical Engineering, Mechanical Engineering Technology RBC Bearings Incorporated (NYSE: RBC) is a leading global manufacturer of highly... 

    RBC Bearings

    Torrington, CT
    4 days ago
  • Quality Engineer - Manufacturing Location: Torrington, CT, US, 06790 Date: Sep 23, 2026 FuelCell Energy is redefining how the world produces and uses power. As a leading clean energy technology company, we're helping businesses, communities... 
    Contract work
    Work at office
    Worldwide

    FuelCell Energy

    Torrington, CT
    4 days ago
  •  ...and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job Responsibilities Perform a wide range... 
    Hourly pay
    For contractors
    Immediate start
    Flexible hours

    HARDY INDUSTRIES

    Torrington, CT
    21 days ago
  •  ...Position Summary The Manufacturing Process Engineer serves as a hands-on process expert responsible for developing, implementing, and optimizing manufacturing processes and equipment used in jet fuel production. The role focuses on improving safety, quality, yield, and... 
    Full time
    Work at office

    Onward Technologies Limited

    Torrington, CT
    2 days ago
  •  ...professional with a strong background in process improvement, precision machining, tooling and fixture development, and manufacturing engineering. The ideal candidate combines mechanical aptitude and practical machining skills with the ability to improve production processes... 
    Full time
    Relocation package

    KamisPro

    Torrington, CT
    5 hours ago
  • $95k - $130k

     ...qualified candidates for a direct hire Facilities Mechanical Engineer job in Winsted, CT for our client, a growing manufacturer of quality...  ...'s degree required, preferably in a related Engineering field. Candidates without a bachelor's degree will be considered based... 
    Permanent employment
    Contract work
    For contractors

    Emerge

    Winsted, CT
    4 days ago
  • $107k - $154k

     ...addresses in @dymax.com.About UsDymax, part of the Bachmann Chemical & Engineering family of brands is based out of Torrington, Connecticut. Dymax...  ...’s degree in Engineering, Computer Science, or an equivalent field; an advanced degree is preferred.10+ years of experience... 
    Full time
    Local area
    Work visa

    Dymax

    Torrington, CT
    13 hours ago
  • $90k - $123k

     ...Job Description Job Description Process Engineer | $90K–$123 K | On-Site | Direct Hire  | Torrington, CT What Matters Most: • Competitive Pay: $90K–$123K, reflecting your expertise in manufacturing process improvement and operational support. • Direct Hire... 
    Work at office

    The Reserves Network Inc

    Torrington, CT
    18 days ago
  •  ...Support overall company goals by participating in kaizen events, meetings or problem solving for improvements to other Manufacturing Engineer/Process Technician Qualifications: # BSME, EE or Mfg Eng. or equivalent; 5 yrs. Manufacturing Engineering Experience;... 

    Kamis

    Torrington, CT
    19 days ago
  • Manufacturing Project Engineer We are seeking a hands-on, results-driven Manufacturing Project Engineer to support the seamless transition of new products and equipment from development into full-scale production within our regulated medical injection molding and assembly... 
    Full time
    Relocation

    Gpac

    Torrington, CT
    17 hours ago
  • The Process Engineer - Quality Focus is responsible for developing, validating, controlling, and continuously improving manufacturing processes with an emphasis on process capability, product quality, and long-term process robustness within a regulated medical device manufacturing... 
    Full time
    Work at office

    Aptyx

    Torrington, CT
    a month ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Refrigeration Field Engineer/Commissioning Agent. Be the first to apply!