Welder B
Philly Shipyard Inc
ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill and/or ability required.
Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes, and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions.
*Hanwha Philly Shipyard is a TOBACCO-FREE facility.
PHYSICAL DEMANDS
The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK
This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, and days and hours are determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE
- Ensure all Hanwha Philly Shipyard safety procedures, rules, and regulations are followed and met
- Knowledge and efficiency of heavy shipyard construction welding in all positions using approved WPS (Welding Procedure Specification) determined by HPSI and Classification Society
- Welding process includes:
- FCAW - Flux Cored Arc Welding
- SMAW - Shielded Metal Arc Welding
- SAW - Submerged Arc Welding
- Automated Welding Process (use of tractors)
- Stainless Steel Fillet Welding
- Padding and preparing weld joints per WPS
- Carbon Arc Gouging
- Note: Not inclusive, shall be determined by vessel specification and classification rules
- Knowledge, understanding, and demonstration of interpreting approved WPS set forth at Hanwha Philly Shipyard
- Knowledge and ability on how to use all welding-related tools, including basic troubleshooting and maintaining welding equipment to ensure a safe and efficient operation
- Welder must proficiently demonstrate welding ability through performance testing as determined by vessel project and classification
- Welder shall perform internal quality checks of their work performance to ensure quality standards are achieved. Be able to do their quality checks of their welds daily
- Welder must maintain their individual NDT rejection set forth by Hanwha Philly Shipyard and Classification Society
- May be trained and required to weld using automated welding systems
- Perform other related duties as required and assigned
- Work Independently according to valid instructions and Hanwha Philly Shipyard rules and standards
- Flexible cooperation with team members
- Must be able to work in different environments and areas (e.g. indoors, outdoors, in confined spaces, on scissor lifts and aerial lifts, and in inclement weather)
- Welder must be able to work in a team environment
- Workmanship assembly - Multi-position 4.5mm (+1.0 mm/-0.5mm) fillet welds
- Grind a weld without leaving scarred surface
- Requires Bend Test of 400mm long Vertical and Horizontal Groove
- Requires Bend Tests of 400mm long test coupons in accordance with Classification Society Rules
Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes, and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions.
*Hanwha Philly Shipyard is a TOBACCO-FREE facility.
PHYSICAL DEMANDS
The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK
This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, and days and hours are determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE
- High School Diploma or GED
- 3 to 5 years' work experience in businesses with heavy industrial or steel fabrication preferred
- 1+ years' work experience in heavy industrial with either an Associate Degree in Welding Technology or completion of the welding training program with PSI curriculum
- Welding robotics a plus
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Welder B in Bryn Mawr, PA vacancy
- ...careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The Welder is responsible for the prep, layout, tack, weld, test, complex...SuggestedShift work
- ...Welder Position at Hanwha Philly ShipyardEssential Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill and/or ability required. Ensure...SuggestedFull timeWork experience placementFlexible hours
- ...General Construction Mechanic 'B' The School District of Philadelphia is committed to becoming the fastest improving District in the country and transforming the educational opportunities it offers to our city's more than 198,000 students. The District seeks leaders...SuggestedApprenticeshipTraineeshipWork at office
$20 - $28 per hour
Description: Job Purpose:Stitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Will also use basic hand tools and grinder at times.Job Summary...SuggestedHourly payFull timeRemote work$24.6 - $34.6 per hour
...Drive Your Career Forward with AAA Club AllianceAre you a skilled B-Level Automotive Technician ready for your next opportunity? AAA Club Alliance is actively hiring—and we're looking for technicians who want to grow, advance, and be part of a trusted, nationally recognized...SuggestedHourly payPrice workFull timeLocal area$17.66 per hour
...We are seeking a reliable and detail-oriented Spot Welder to join our production team. The Spot Welder is respoonsible for operating spot-welding equipment to assemble and fabricate metal components according to specifications while maintaining quality and safety standards...Hourly payFull time- Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 30...Shift work
$21 - $25 per hour
...Welder Location: 377 Crooked Lane, King of Prussia, PA, 19406, United States Employee Type: FT Non-Exempt Required Degree: High school Manage Others: No Contact information Name: Kyle Moser Phone: (***) ***-**** Email: Description We are...Hourly payFlexible hours- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$30 per hour
...Job Description CTR Group is seeking experienced Structural Welders for the North-Eastern United States area for full-time positions.... ...PAY RATE $30 per Hour Plus $150 Per Diem Structural Welder B: Experience: 5+ years' work experience in welding. Must...Hourly payDaily paidFull timeWork experience placementDay shift$26 per hour
...Pipe WeldersLabor One is currently hiring pipe welders in San Diego, CA at a shipyard. Pay rate is up to $26 + $160 per diem, if eligible. Job requirements include three years of experience in welding, knowledge of welding procedures, and various types of welding equipment...Daily paidCurrently hiringShift work- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...Job Brief We are looking for a welder/pipefitter to build and maintain fuel lines on petroleum and propane trucks that lives or is willing to move within 20 miles of the shop. We are looking for individuals that desire a long‑term employment relationship with the opportunity...
$20 per hour
...Job Description Job Description Job Title: MIG/TIG Welder Job Description Join our dynamic team as a MIG/TIG Welder at a manufacturing company specializing in lift equipment. Responsibilities Pull and organize materials for production purposes. Set up...Weekly payContract workTemporary workMonday to FridayDay shift- ...Job Description: Welder: Shift: 6 AM - 2:30 PM: Responsible for preparing and welding aftermarket custom exhaust components. Strong communication and math skills. Good interpersonal skills with the ability to communicate and interface positively with other...Local areaShift work
$26 - $35 per hour
...Join Our Team! Position: Fabricator/Welder Location: Lansdale, PA Pay Rate: $26.00 - $35.00 an hour (Negotiable) Are you ready to take the next step in your career? We're actively seeking a skilled and dependable Fabricator/Welder to join our team in Lansdale...ApprenticeshipImmediate startMonday to FridayShift work$20 - $30 per hour
...Job Description Job Description Craftweld Fabrication is looking for an experienced, dependable MIG/TIG Welder & Fabricator to join our team. We are a job shop specializing in custom fabrication, so the ability to work on a variety of projects, interpret drawings...Hourly payFull timeShift work$37 - $47 per hour
...Job Description Job Description Generator Field Service Technician, B-Level Location: Greater Philadelphia and southern New Jersey Schedule: Full time, shared on-call rotation Pay: $37.00 to $47.00 per hour, plus company vehicle LaTrae Consulting Group is...Hourly payFull timeTemporary workApprenticeshipMonday to FridayShift workNight shiftWeekend workDay shift$30 per hour
Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 30...Shift workWeekend workDay shiftAfternoon shift- ...Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (***) ***-**** / (***) ***-**** *Please send us a text if we don't answer...Work at officeLocal areaFlexible hours
- Job Description Job Description Job Summary: The Fire Sprinkler Technician is responsible for the installation, testing, inspection, service, and repair of fire sprinkler systems. Respond to emergency and maintenance calls and troubleshoot/replace faulty components...For contractorsRelocation package
- ...Welder/Pipefitter Journeyman Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive...Work at officeMonday to FridayShift workWeekend work
- ...Structural WelderLabor One is currently hiring structural welders in Pascagoula, MS at a shipyard. Job requirements include three years of experience in shipyard, comprehension of written and verbal instructions in English, the ability to hear warning signals, read and...Currently hiringShift work
$20 per hour
...MIG/TIG WelderJoin our dynamic team as a MIG/TIG Welder at a manufacturing company specializing in lift equipment.ResponsibilitiesPull and organize materials for production purposes.Set up steel parts into fixtures and fit materials for welding.Adjust MIG Welding equipment...Contract workTemporary workMonday to FridayDay shift- ...Job Description Job Description Overview The Welder performs preventive maintenance, fabrication welding, refurbishes refuse containers and compactors, rehabilitates scuffed paint, installs decals and ensures accurate repair and replacement of components. #INDSJ...Relocation packageAfternoon shift
$30 - $32 per hour
...Job Description Job Description WELDER- WEEKLY PAY- START ASAP Location: Baltimore, MD Pay: $30-$32/hour + $50 daily per diem + daily lodging Hours: Monday-Saturday This role supports maintenance and repair activities at a coal-fired utility plant in Baltimore...Weekly payDaily paidContract workTemporary workImmediate startShift work- ...Welder / Fabricator — 2nd Shift Clemens Food Group | Onsite | Monday–Friday Schedule: 2:00 PM–10:00 PM, with flexibility around the start time Why Join Clemens Food Group? Are you a skilled TIG welder who enjoys more than running the same weld over and over?Do you take...Monday to FridayShift workAfternoon shiftWeekday work
$40 per hour
...Welders WantedTradesmen International is immediately hiring experienced Welders for projects located in the Philadelphia, PA area. This is a first shift opportunity, and the pay rate is up to $40/hour based on experience and skill level. If you are a Welder and want to...Work at officeImmediate startDay shift- Job TitleJob DescriptionHelpYou will be identifying and associating metals, alloys and filler metal by color code and standard markings.You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests.You will be using test methods ...
- ...Welding PositionYou will serve as a welder in the Department of the Navy to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder B. Be the first to apply!


