Assembler III
ESL Power Systems
Job Type
Full-time
• (Peer to Peer check) • Route and manage wiring inside enclosures. • Verify work orders, drawings, and BOMs before assembly. • Size wires for control and power circuits and perform proper crimping and terminations. • Use shop equipment including drills, saws, crimping tools, and measuring tools. RESPONSIBILITIES • Perform self-inspections to support first pass quality. • Identify drawing issues, missing parts, or assembly problems. • Assist with troubleshooting and rework when needed.
• Support training of Assembler II employees. • Maintain a clean and organized workspace using 5S practices. • Follow all safety procedures and company policies. • Communicate with leads, supervisors, and team members to support production. • Demonstrate ESL core values in daily work and teamwork. • Perform other duties assigned by the supervisor. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. • High School Diploma or equivalent preferred. • Minimum of 3 years of experience in manufacturing or a similar environment. • At least 2 years of experience with electrical wiring, crimping, and electrical assembly. • Ability to read and understand electrical schematics, work tickets, and layout drawings. • Knowledge of electrical components used in control panels and enclosures. • Ability to work independently with limited supervision. • Strong attention to detail and commitment to quality. • Ability to communicate effectively and work well in a team environment.
• Minimum 24 months as an Assembler II
• Maintain a minimum performance rating of 85% • Must pass Assembler III exam • Consistent attendance and reliability PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will:
Standing 33%, sitting 13%, walking 18%, computer use 4%, bending 16%, stooping 16%, lifting up to 50%. • Work with ladders up to 12 feet. • Wear common protective or safety equipment such as safety shoes and safety glasses WORK ENVIRONMENT While performing the duties of this job, the employee is regularly exposed to normal operating working conditions. The noise level in the work environment is usually moderate. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with illnesses or disabilities to perform the essential functions. Salary Description
25.17-27.39
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Assembler III in Corona, CA vacancy
$74k - $105.82k
...Apply today! Job Details Location: This Controls Technician III will have the opportunity to support two state-of-the-art... ...automated distribution center including the design, operation, assembly, repair, program, and diagnosing of MHE Controls systems. This position...SuggestedFull timeWork experience placementLocal areaRemote workFlexible hoursShift workDay shiftAfternoon shift$22 - $24 per hour
...Join our Motion Solutions Department as a Technician, where you'll be responsible for troubleshooting, reworking, building, and assembling control panel boxes for clients. Your role will be crucial in ensuring the efficient operation and assembly of these systems. The...SuggestedContract workTemporary workSummer workMonday to FridayShift workDay shift- Acromil LLC is seeking an Aerospace Mechanical Assembler in Corona, CA. The role involves assembling aerospace components, reading blueprints, and ensuring quality standards. Qualified candidates should have a GED and over 5 years of relevant experience, along with the...Suggested
- Career Opportunity - Aerospace Mechanical Assembler - Acromil LLC - Corona Using state-of-the-art technology, Acromil, LLC in Corona, CA has been a primary supplier to the Commercial and Defense Aerospace Industries of complex structural components and assemblies since...SuggestedPermanent employmentNight shift
- ...solvers, and collaborators. The Operations & Maintenance Technician III - Welder/Fabricator is a senior‑level role responsible for the... ...maintenance: maintain and refurbish specialized water utility assemblies, including large gates, valves, and shafts. Facility safety &...SuggestedNight shift
$74k - $105.82k
...animals everywhere. Job Details Location: This Controls Technician III will support two state-of-the-art Distribution Centers, one in... ...include complete controls system design, operation, assembly, repair, programming, and diagnostics of MHE controls systems. The...Full timeWork experience placementLocal areaRemote workFlexible hoursShift workDay shiftAfternoon shift$74k - $105.82k
Cencora is seeking a Controls Technician III to support automated equipment in Distribution Centers located in Corona and Fontana, CA. This role requires effective maintenance and repair of MHE controls systems and ensures compliance with company standards. The ideal candidate...$40.29 per hour
...Job Description: Maintenance Tech III Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it’s equally important you know that the company that you choose...Full timeH1bWork at officeRelocation packageFlexible hoursNight shiftWeekend work$38 - $58 per hour
...Field Technician III Electric Power Systems (EPS) is a NETA-accredited independent electrical testing and engineering organization specializing in electrical acceptance testing, commissioning, and maintenance for clients across Data Centers, Utility, Generation, Renewables...Hourly pay$18 per hour
A leading musical instrument manufacturer in California is looking for dedicated individuals to join their manufacturing team. This role involves shaping, finishing, inspecting, and packing guitars, requiring attention to detail and a commitment to quality. Candidates ...- ...HVAC Technician III Location CA - Norco Job Code 14044 of openings 1 Apply Now ( The Alaka`ina Foundation Family of Companies... ...technical personnel in the identification of materials, parts assemblies, and requirements for a variety of requisitions. Responds to...Full timeFor contractorsWork at officeRelocation
$10k
Level-3 Commercial HVAC Service Technician As a Level-3 Commercial HVAC Service Technician you will use your experience in problem solving and troubleshooting to communicate with the client and provide them solutions for repairing their HVAC Systems. It will be the ...Local areaWeekend work$27 - $30 per hour
...welders. • Responsible for consistently meeting quality and production standards. • May assist sheet metal, fabrication, grinding, and assembly work crews as needed. • Must consistently and properly wear PPE. Qualifications: Required Skills/Abilities: • Quality Management...Hourly payDay shift$17 - $22 per hour
...environment. Our people make us who we are, and we create incredible products and experiences that empower us to THINK OUTSIDE. As an Assembler you will work within a team to to build Walker Evans shocks from start to completion. In this role, you'll utilize various hand...Hourly payLocal areaShift work- ...requirements listed below, are essential to the success of your career with Restoration Management Company. Job Summary The Lead Technician III must be able to lead a large team of technicians through each phase of the project from the initial stage to completion. This...Work at officeLocal areaImmediate startWeekend work
$31.29 - $48.63 per hour
...The Maintenance Technician III supports the FedEx industrial maintenance of material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to mechanical power transmission,...Hourly payMinimum wageContract workWork at officeLocal areaAll shiftsFlexible hoursDay shift$31.29 - $48.63 per hour
...Maintenance Technician III The Maintenance Technician III supports the FedEx industrial maintenance of material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to...Hourly payMinimum wageWork at officeLocal areaAll shiftsFlexible hoursDay shift- ...Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.Positions parts and subassemblies by using templates or reading measurements.Assembles...
$19 - $21 per hour
...Assembler Under close supervision, assembles small parts, capacitors, switches, and related components into cabinets; fabricates various sub-assemblies; and does other work as required. Responsibilities To perform this job successfully, an individual must be able...Hourly pay$18 - $19.5 per hour
...Corona, California 2301 Wardlow Cir Corona, CA 92878, USA Description POSITION DETAILS May perform mechanical assembly which is typically highly complex and would be responsible for fitting, aligning or adjusting of components and/or assemblies to close tolerance Knowledge...Hourly payTemporary workShift work$27.01 - $32.63 per hour
...Quality, Humility, and Safety. These are essential to the success of your career with the company. Job Summary The Lead Technician III leads a large team of technicians through each phase of the project from initiation to completion. This position reports directly to...Hourly payFull timeWork at officeLocal areaImmediate startWeekend work$17 per hour
...Job Title: Assembler Location: Chino, CA Shift: Monday - Friday, 2 5:30am - 2:00pm Pay: $17.00 Responsibilities: Feeding materials (30lbs) into robot welder machines Operate the controls of the robot weld machine Rotate through tasks for specific...Monday to FridayShift workDay shift$30 - $40 per hour
...accuracy matters) Reliable attendance and professional attitude Core Responsibilities Perform layout for structural steel assemblies: beams, columns, plates, embeds, base plates, misc steel as assigned Mark, measure, square, and verify parts before fit-up/...Permanent employmentFull time$22 per hour
...In this role, the Assembler, where you will provide friendly assistance to customers and team members, coordinate with other departments when needed, and respond to questions by phone, email, or in-person. Additional duties include manage simple records and enter information...Weekly payFlexible hours- ## Fabricator I – Second ShiftApplylocations: Riverside, CAtime type: Full timeposted on: Posted Yesterdayjob requisition id: R7694Simpson Strong-Tie is a leader in engineered structural connectors, software, and solutions for the building industry. We maintain a reputation...Full timeContract workSeasonal workLive outRelocation
$19.25 - $23.65 per hour
Simpson Strong-Tie Company Inc. seeks a Fabricator I for their Riverside, CA location. This entry-level position focuses on building production skills, operating equipment, and contributing to daily manufacturing needs. The ideal candidate will demonstrate foundational...Hourly payAfternoon shift- WE ARE HIRING! Position: Fabricator City: Corona Schedule: 5AM-2PM Pay Rate: $18h/r Job duties: At least 1 year of experience Ability to read a tape measure Cut, chamfer and stamp studs APPLY TODAY! We accept applications Monday-Friday 8AM-3...Monday to Friday
$22.4 per hour
Order Builder We are hiring immediately for full time Order Builder positions. Location: Canteen - 2220 Railroad Street, Corona, CA 92878. Note: online applications accepted only. Schedule: Full time schedule. Thursday through Sunday, hours may vary. Further details...Hourly payFull timePart timeWork at officeLocal areaImmediate startRemote workFlexible hours$22.4 per hour
Job Description Job Description We are hiring immediately for full time ORDER BUILDER positions. Location : Canteen - 2220 Railroad Street, Corona, CA 92878. Note: online applications accepted only. Schedule : Full time schedule. Thursday through Sunday...Hourly payFull timePart timeWork at officeLocal areaImmediate startRemote workFlexible hours$18 per hour
...is made up of Production Associates and Bike Builders who work together to get our customers their dream bike. Our Bike Builders assemble and prepare all types of bikes to be shipped to customers. Our Productions Associates support the team in the packing and shipping...Hourly payFull timeWork at officeFlexible hoursShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Assembler III. Be the first to apply!


