CNC Programmer
Mazak Optonics
CNC Programmer PositionMazak Corporation is looking for a CNC programmer to join the FMF team. The CNC Programmer is accountable for developing safe, accurate, and production-ready machining processes that meet quality, delivery, and cost requirements. This role converts engineering drawings and solid models into complete CNC programs, tooling plans, setup instructions, and prove-out support. The programmer owns assigned work from initial review through stable production and is responsible for preventing programming-related defects, machine risk, and avoidable downtime.Scope and responsibilities essential duties include, but are not limited to the following:CNC Programming and Process Development: Create, revise, and optimize CNC programs from engineering drawings, solid models, and specifications. Determine machining sequence, tooling, workholding, speeds, feeds, and process requirements.Program Verification and Risk Control: Simulate and verify toolpaths, work offsets, clearances, and machine limits before release. Identify and eliminate collision, overtravel, part damage, and equipment risk.Setup Documentation and Shop Support: Prepare clear setup sheets, tooling lists, fixture instructions, and program notes. Work directly with machinists and operators during setup, prove-out, and production support.First-Piece Prove-Out and Production Release: Lead or support first-piece prove-out, make required program adjustments, confirm process stability, and release programs only after quality and production requirements are met.Quality and Technical Compliance: Interpret drawings, GD&T, tolerances, and inspection requirements. Coordinate with Quality and Engineering to resolve discrepancies and prevent nonconforming parts from moving downstream.Troubleshooting and Corrective Action: Diagnose dimensional variation, surface finish, chatter, tool-life, cycle-time, and program-related issues. Implement permanent corrective actions rather than temporary workarounds.Cycle Time, Tooling, and Cost Improvement: Improve machining efficiency through better toolpaths, cutting parameters, tool selection, setup methods, and process sequencing while protecting quality, tool life, and machine capability.Cross-Functional Coordination: Coordinate with Production, Engineering, Quality, Tooling, Maintenance, and supervision to support manufacturability, schedule priorities, new work, and recurring production issues.Documentation and Revision Control: Maintain accurate program files, setup documents, revisions, tooling data, and standard work. Follow established naming, approval, backup, and change-control requirements.Safety, 6S, and Continuous Improvement: Follow all safety procedures, support organized work areas consistent with 6S principles, and participate in continuous-improvement activities that strengthen safety, quality, delivery, and cost.Education / CertificationHigh School Diploma or equivalent required; associate degree or technical certificate in CNC machining, manufacturing technology, or a related field preferred.Skills3 years experience with CNC programmingExperience in operation and setup of CNC machinesProficient using MastercamMazatro experience is preferred.Experience reading blue printsExperience understanding what the cutting conditions are and make the necessary adjustments to provide a part in the quickest / safest manner to meet production needs.Experience using various gaging instruments such as finger indicators, plunge indicators, calipers, micrometers, bore gages, ring gages, snap gages, tape measure and scales.Experience with fixture set up and work holding techniques.
- ...Erlanger, KY Job Description This position is responsible for assisting in process setup, prove‑out and maintaining programs for various CNC equipment, including but not limited to CNC mills, 7‑axis grinders, 3, 4, and 5‑axis grinders, lathes, and wire EDM machines. Job...SuggestedWork at officeShift workDay shift
- ...Description 1st week of training will be done in 1st shift. Lathe Machinist The Machine Operator will primarily work with CNC machines on day shifts, ensuring efficient and safe operation while following guided setup procedures under supervision. This role involves...SuggestedShift workDay shiftAfternoon shift
- 5-Axis CNC ProgrammerWe are seeking a highly skilled and detail-oriented 5-Axis CNC Programmer with strong aerospace manufacturing experience to develop, optimize, and maintain complex machining programs for precision components. The ideal candidate will have deep experience...Suggested
- ...CNC Programmer/MachinistWe are seeking a talented CNC Programmer/Machinist to work in a fast-paced, team-oriented environment at our northern Cincinnati, Ohio location (less than 30 minutes from Dayton and/or northern Kentucky). Essential Job Functions Develop, write,...Suggested
$24 - $30 per hour
...Crown Staffing is urgently hiring for a CNC Milling and Lathe Operator. CNC Milling and Lathe Operator Job Details Schedule : Monday-Friday, 7:30 AM-4:00 PM Pay Rate: $24.00-$30.00/hr, based on knowledge and experience Location : Florence, KY CNC Milling...SuggestedWeekly payPermanent employmentApprenticeshipImmediate startMonday to Friday- ...CNC OperatorMazak Corporation is looking for a CNC Operator to join the Manufacturing team. The CNC Operator is responsible for setting up, running and or test cutting production parts to meet our planned schedules and quality requirements. Essential duties include, but...
- ...Join to apply for the CNC Programmer III role at Fairbanks Morse Defense Reports To: Manufacturing Engineering Manager Position Summary Federal Equipment Company has been a leading supplier for marine deck machinery and specialized weapons and material handling systems...Full time
$27.5 - $30 per hour
...Make Tomorrow Better Than Today! The REGAL REXNORD team is looking for an Advanced CNC Machinist to fuel their passion to grow by improving themselves, leading others, and exceeding expectations. Success in this role requires a strong strategic and analytical orientation...Hourly payFull timePart timeRelocation packageDay shiftAfternoon shift- ...CNC Machinist - 3rd ShiftCNC Machinist will be required to perform tasks related to program editing, set-up, operation, trouble-shooting and preventive maintenance for CNC machines, custom process machines and production support equipment. Read manufacturing prints, machine...Night shift
$29.65 - $37.06 per hour
...CNC Machine OperatorFull-time Erlanger, KY Exclusive confidential search — details shared with qualified applicants.Become a Key Player as a CNC Machine OperatorYou will keep production moving by setting up, operating, and troubleshooting CNC mills, lathes, and mill-turn...Part timeShift workNight shiftAfternoon shift$30 per hour
...Job Full Description CNC Programmer Location: West Chester, OH Pay: $30/hr+ Shift type: Full-time/ On-site Requirements Associate or technical school degree in CNC Programming or an equivalent combination of education and experience...Full timeShift work- ...Job Description Job Description The Machine Operator will primarily work with CNC machines on day shifts, ensuring efficient and safe operation while following guided setup procedures under supervision. This role involves monitoring machine performance, handling materials...Day shift
- ...Fabrication Department located at our headquarters in Florence, KY. A press brake operator will form different gauges of sheet metal on a CNC Press Brake to various angles and shapes. This is a second shift position. The hours for this position are M-TH 3:30pm-2am.Scope and...Afternoon shift
- ...you refer Vacation pay Temp to hire opportunitiesResponsibilities of the Press Brake Operator Form different gauges of sheet metal on CNC Press Brake to various angles and shapes. Pull parts from baskets. Correctly forming sheet metal to various degrees of bend according...Temporary workAfternoon shift
$19 - $24 per hour
...measuring instrumentsForms parts to specifications indicated on blueprintsQUALIFICATIONS:Skilled in machine operation or Press Brake/ CNC/ Turret operationAbility to lift 30 to 50 poundsAbility to read, calibrate gauges, select tools, use a protractor, angle finder tape...Monday to FridayShift work- ...Location: Florence, KY Job Overview: A machining-focused manufacturer is looking for a CNC Lathe Operator to support evening shift operations. Candidates should be comfortable with setup, operation, and inspection of precision components. Key Responsibilities...Hourly payShift workAfternoon shift
$80k - $90k
...DIRECT HIRE: An awesome opportunity for an experienced 5-Axis CNC Programmer to join a dynamic team in the Hebron, KY. area. The successful candidate must be a highly skilled and detail-oriented 5-Axis CNC Programmer with strong aerospace manufacturing experience to...Full timeShift workDay shift- ...CNC Lathe OperatorCurrently seeking qualified candidates for a CNC Lathe Operator on 2nd shift in the Florence, KY area. Compensation and Benefits for the CNC Lathe Operator Unlimited $150 referral bonus for any new applicants you refer Vacation pay Temp to hire opportunitiesResponsibilities...Temporary workAfternoon shift
$17.2 per hour
...Of Experience with reading and interpreting blueprints. Must have previous knowledge of protractors and gauges. CNC Machine experience is preferred. Attention to detail and precision in work A safety-focused mindset is required Experience...Hourly payImmediate startShift work$23.4 - $31.66 per hour
...Kentucky. Salary Range: $23.40 - $31.66 per hour Excellent Benefits Package Job Summary : We are seeking a skilled CNC Machinist to join our manufacturing team. In this role, you will set up and operate CNC mills, lathes, and other production equipment...Hourly payPart timeAfternoon shift- ...Hi-Tek Manufacturing is searching for experienced 2nd shift CNC Operators to run Lathe / Turn machines who wish to continue his or her career in advanced manufacturing technology by executing a higher level of workmanship. Hi-Tek offers competitive wages and a full benefit...Temporary workWork experience placementMonday to FridayShift workAfternoon shift
$27.14 - $36.72 per hour
...Kentucky. Salary Range: $27.14 - $36.72 per hour Excellent Benefits Package Job Summary We are seeking an experienced CNC to join our manufacturing team. In this role, you will set up and operate CNC mills and lathes to produce precision-machined...Hourly payApprenticeshipAfternoon shift$20 - $28 per hour
...Located in Cincinnati, OH Salary: $20-28/hr CNC Machinist Positions Location : Cincinnati, Oh Shifts : 1st (M-TH 6a.m.-4:30p.m.) & 3rd (M-TH 7:30p.m.-6a.m.) We are looking for machinists with a minimum of TWO YEARS EXPERIENCE with: CNC Mills CNC Lathes CNC Grinders Vertical...Work at officeShift work- ...Job Description Job Description We are looking for an experienced CNC Lathe Machinist to join our rapidly growing company. Must have at least 2 years of experience.Candidates must be dependable, self-directed, able to read blueprints and take pride in their work....
$25 - $35 per hour
...Role Exists Blue Chip Tool, Inc. is expanding its machining capacity to support steady demand across both prototype and production CNC work. As a long-established, family-owned precision machine shop in Cincinnati, we are strengthening our lathe and milling...Hourly payFull timeFlexible hoursShift workDay shift- ...CNC Lathe MachinistLocation: Forest Park, OHShift Type: Full-timePay: $40-$43/hrRequirements10+ years of hands-on experience operating and setting up CNC lathes in a manufacturing environment.Strong ability to read and interpret blueprints, engineering drawings, and GD...
- ...that's partly yours. Your wins aren't just good for the company — they're good for you. KEY RESULT AREAS: · Creates error-free CNC programs. · Decreases tool searches by operators or supervisors via indirect measurements. · Increases productivity based...Part time
- ...We are seeking an experienced CNC Lathe Machinist to join our team. The ideal candidate will have a minimum of 5 years of experience setting up and operating CNC lathes to produce high-quality precision parts. Responsibilities: - Set up and operate CNC lathes to produce...Full time
- ...Job Description Job Description Swiss CNC Machine Setup Operator We are hiring an experienced Swiss CNC Machine Setup Operator to set up and operate CNC machines while maintaining production efficiency and quality standards. Responsibilities: Set up and...Shift work
$32 - $38 per hour
...CNC MachinistLocation 12209 Chandler Drive, Walton, KY, 41094, United StatesBase Pay $32.00 - $38.00 / HourJob Category CNC Machinist, Machine ShopIndustry Printing, ManufacturingEmployee Type Non-ExemptRequired Degree High schoolMinimum Experience 2 YearsDescription Summary...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Programmer. Be the first to apply!





