Power Plant Mechanic
WIN Waste Innovations
Third Class Maintenance Mechanic
WIN Waste Innovations is looking for a Third Class Maintenance Mechanic who will be responsible for the installation, troubleshooting, cleaning, inspecting, and maintenance of mechanical equipment throughout the facility in a safe and professional manner.
Responsibilities:
- Initiates and completes work-orders and requisitions and documents all critical and or pertinent information on a routine basis.
- Ability to use and become proficient with Computer Maintenance software (Tabware)
- Respond and report to work during off hours when emergency repairs are required/ ability to be on call.
- Troubleshoot equipment, diagnose problems, and make necessary repairs.
- Operate mobile equipment including, but not limited to, industrial forklifts, manlifts, skid steer type loaders, and other mobile equipment.
- Perform routine maintenance and repairs around facility grounds.
- Identify and repair potential safety hazards
Preferred Requirements:
- Tech Schooling Experience
- Proven mechanical abilities in previous jobs
- Experience with Oxy-Acetylene torch usage
- Ability to read and record measurements with precision
- Welding, soldering, brazing, pipe fitting
Certificates and Licenses:
- Licenses as required by Local, State, Federal, Environmental and/or Health/Safety Regulatory agencies.
Work Environment:
Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.
- Noise in work environment
Physical Demand:
- Stand
- Sit for prolonged periods of time
- Walk
- Handle tools, equipment, fine motor skills
- Reach with hands and arms
- Climb and walk on heights often greater than 4 feet
- Stoop, kneel, bend, push, pull, crawl
- Ascend and descend stairs and stationary vertical ladders as part of normal work activity and emergency egress situations
- Lift 50 lbs.
- Move about all areas of the plant, including catwalks, deck grating, and uneven surfaces
- Close vision, distance vision, peripheral vision, depth perception, corrected or otherwise
- Operate a 1.5-inch fire hose operating at 125 psi line pressure to the extent required to extinguish fire
- Operate fire extinguishing equipment ranging from handheld extinguishers to 200 lb portable units
- Access confined spaces and pressure vessels through standard 12" by 16" manways
PPE Required:
Work in areas under adverse conditions that may require the donning and use of personal protective equipment including, but not limited to, the following with average fatigue:
- Negative pressure respirator
- Positive pressure respirator
- Self-contained breathing apparatus (steel or composite bottle)
- Hardhat
- Approved safety shoes
- Eye protection
- Rubber suit and gloves
- Chemical resistant suit
- Heat resistant outerwear
- Flame resistant outerwear
- Approved hearing protection
- Gloves
- Safety harness
What You'll Enjoy:
- Industry leading benefits
- Multiple and flexible medical plans
- Outstanding PTO program
- Floating Holidays
- Strong 401k program and company match
- Tuition reimbursement plan
- College loan reimbursement
- College scholarship program for dependents
- Parental Leave Program
- Inclusive culture
- Employee engagement events
- Employee resource groups
WIN Waste Innovations is a waste management company committed to delivering essential waste management solutions to customers and communities supported by our team of 2,300 employees. We believe in preserving our environment for future generations while providing for today's needs. WIN Waste Innovations is a vertically integrated business with a platform of 50 strategically located collection, transfer, and disposal assets. These include waste-to-energy facilities, transfer stations, ash monofills, landfills, and fleets of rail cars and collection vehicles. We process more than 11 million tons of waste annually, converting 6.7 million tons of waste into clean, renewable energy that powers 340,000 homes. We recycle more than 234,000 tons of plastic, paper, and metals from the waste stream.
At WIN Waste Innovations, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled.
WIN Waste Innovations$30 - $41 per hour
...technologies, we’re designing and building commercially viable fusion power plants. And we're working with policymakers and suppliers to build... ...technician position requires 6+ years' experience in electro mechanical assembly. Contract: 6 month term Rate of pay: $30 -...SuggestedHourly payContract workFor contractorsNight shiftWeekend work$104.4k
Posting Description PLANT ENGINEER,Central Utilities Plant (CUP), responsible for engineering... ...discipline; a minimum of five years power plant experience; knowledge and understanding... ...plant systems, plant engineering, and/or mechanical design of CHP facilities; demonstrated...SuggestedFull timeVisa sponsorshipLong distance$70k - $110k
...business unit that provides construction services for industrial: building products manufacturers, decarbonization, power generation facilities, manufacturing plants; infrastructure: general heavy civil, underground & utilities, structures, electrical, material production,...SuggestedDaily paidFull timeContract workTemporary workFor contractorsWork experience placementFor subcontractorWork at officeLocal areaRelocationHome officeFlexible hoursShift work$34.83 per hour
...SJS), also doing business as SJS Industrial, is currently seeking a reliable, safety conscious, experienced, Machinery Maintenance Mechanic on 2nd Shift , to work full time for SJS for a brand-new position in Chelmsford, MA at the VA Consolidated mail outpatient...SuggestedHourly payFull timeContract workMonday to FridayShift workDay shiftAfternoon shift$72.4k - $108.6k
...duties as assigned Basic Qualifications Bachelor's Degree in Mechanical Engineering or related discipline from an accredited College or University with 3+ years of relevant experience in Power Plant Maintenance, Turbine Maintenance, or Power Plant Equipment...SuggestedContract workTemporary workFor contractorsRemote workRelocation package- ...autonomy, and speed. For deeper vision, operational excellence, and powerful insights. And then we'll upgrade it all again. Lumafield is... ...CA. and has an office in Cambridge, MA. About the role: As a Mechanical Assembly Technician, you’ll play a key role in assembling and...Work at officeFlexible hours
$38 - $45 per hour
...currently looking for a Licensed or 3rd Year Apprentice Heavy Duty Mechanic (Truck and Coach Technician 310T) to join our team. This... .... *CH #LI-SK Job Identification: 162995 Category: Plant & Facilities Posting Date: 2026-07-08 Job Schedule: Full...Full timeApprenticeshipCasual workMonday to Friday$38 - $42 per hour
Clean Harbors in Breslau, ON location is currently looking for a Heavy Duty Mechanic to join our team. This position is responsible for maintaining / repairing heavy diesel equipment within the facility. Wage range for this position: $38-42/hour Why work for Clean...Full timeApprenticeshipCasual workLocal areaAfternoon shift- ...Sr. Mechanical Technician Malden, MA Quaise Energy is unlocking Earth's deep heat to deliver... ...energy far below the surface, enabling power generation that can rival the output of... ...s most efficient fossil fuel and nuclear plants. Leveraging millimeter wave drilling,...For contractorsWork at officeRelocation
- Quaise Energy is seeking a Senior Mechanical Technician to support R&D by building, modifying, and maintaining prototype hardware for millimeter wave drilling technologies. You will work closely with scientists and engineers to prototype, test, troubleshoot, and refine...
- Quaise Energy, Inc. is seeking a Senior Mechanical Technician to support R&D by assembling, testing, and refining prototype hardware for millimeter wave drilling systems. You will work with scientists and engineers to advance lab equipment and ensure smooth operation of...
- Quaise Energy, Inc. is seeking a Senior Mechanical Technician to support R&D activities by designing, assembling, testing, and maintaining... ...wave drilling tech, including waveguides, gyrotrons, power supplies, pumps, and related equipment. Responsibilities include...
$18 - $21 per hour
...products, and implementing corrective actions to address deviations. Risk Management: Identifying potential safety risks within the plant and ensuring appropriate corrective actions are taken to mitigate them. Monitor production personnel to ensure that a consistent quality...Hourly payMinimum wageFull timeWork at officeLocal areaShift workDay shift- ...military compensation and benefits as active-duty service members. Job Description GE Aerospace is seeking a Digital/Electro-Mechanical Technician for the Lynn Test Systems Engineering Team. The Technician will be responsible for highly detailed applications,...Permanent employmentFull timeApprenticeshipWork experience placementInternshipRelocation packageFlexible hours
$38 - $42 per hour
Clean Harbors Braslau, Ontario is looking for a Licensed Heavy Duty Mobile Mechanic to join their safety conscious team! This position will be responsible for routine maintenance, inspections, and repairing of all company fleet at branch and client locations throughout...Permanent employmentFull time- Re:Build Manufacturing is seeking Production Technicians to support rapid prototyping and production readiness through precise assembly and quality control. You will follow detailed work instructions and contribute to documenting processes while collaborating with a cross...
- AMETEK, Inc. in Wilmington, MA, is seeking a detail-oriented inspector to perform incoming inspections and support manufacturing equipment maintenance. You will conduct complex tests on production parts using precision tools and participate in prototype development using...
- ActionLink is seeking a Full-Time Retail Electronics Merchandiser to join our team in Everett, MA. You will visit major retailers within an assigned radius, assemble and maintain promotional displays, and ensure proper product placement for Microsoft, Samsung, T-Mobile,...Full timeAfternoon shiftWeekday work
- ...inspections on development and production materials, maintaining manufacturing equipment, and executing precise measurements with mechanical and electrical tools. The candidate should have 1-3 years of related experience, strong analytical and communication skills, and...
$37 per hour
...is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its... ...energy. Job Summary: The primary responsibility of the Aero Mechanical Technician is to safely accomplish the installation,...Hourly payFor subcontractorWeekend work- ...will do it: Actively participates in the development, implementation and application of processes (assembly and test) for mechanical, electromechanical, and electronic instruments Interface directly with Design, Quality, and Manufacturing Engineering...Hourly payLocal area
- ...personnel to investigate and correct manufacturing, documentation, and component problems as they arise Qualifications: Diploma in mechanical engineering, other engineering disciplines will be considered Minimum of 5 years of related experience Ability to understand and...
- ...Manufacturing and Assembling of Products Inspection of incoming materials Electronic assembly of products (soldering of some components) Mechanical assembly (bolting, layup, other simple tasks) Test and Calibration of electronic amplifiers and drivers Final electrical test and...Permanent employmentWork at office
- Production Technician $21.50/hr Manufacturing Environment 12-Hour Shifts - 6:00PM - 6:30AM Join a Safety-First Manufacturing Team! We are seeking reliable, detail-oriented Production Technicians to support operations on the Blade Assembly Machine. This role is ideal for...Full timeShift work
- Manufacturing Technician The Manufacturing Technician position is responsible for the manufacture, inspection, and final product packaging and sterilization of Conformis implants and components. 2nd Shift Mon Fri, 3:00pm 11:30pm Essential Duties and Responsibilities: Develop...Work experience placementWork at officeFlexible hoursWeekend workAfternoon shift
- CNC Machinist The CNC Machinist will be responsible for owning the Company's blanking process, including setting up, maintaining tooling, programming, troubleshooting, general process improvement, and material handling. This role will primarily operate the Swiss CNC machines...Work at office
- ...to join a 20,000-member team that works on the technology that powers the world around us? Looking for an atmosphere of trust, empowerment... ...position working 3pm - 11:30pm. Key Responsibilities Perform mechanical and electro-mechanical assembly tasks in a cleanroom...Permanent employmentShift workAfternoon shift
- ...initiatives. The ideal candidate has CNC machining experience, strong mechanical aptitude, attention to detail, and a commitment to quality and... ...Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company...Hourly pay
$26.54 per hour
Company Overview Check out this video and find out why our team loves to work here! ( Join Us! CDM Smith – where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful...H1bImmediate startFlexible hours- Manufacturing Technician I The Manufacturing Technician I is responsible for executing processes in production at Takeda's manufacturing facility while strictly adhering to cGMP, environmental health and safety guidelines and any other related regulations that apply...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Power Plant Mechanic. Be the first to apply!



