Operator
CKM INDUSTRIES INC
Level: Experienced Job Location: Deer Park - Deer Park, TX 77536 Primary Responsibilities and Key Deliverables Safely handle, store, and apply chemical cleaning agents according to safety guidelines and procedures. Perform chemical cleaning of equipment such as pipes, tanks, heat exchangers, and other industrial systems. Monitor the cleaning process to ensure effectiveness and compliance with safety standards. Inspect and maintain cleaning equipment, ensuring it is in good working condition. Record details of cleaning operations, including chemicals used, procedures followed, and results achieved. Adhere to all company, local, state, and federal safety regulations, including the use of personal protective equipment (PPE). Identify and resolve issues that arise during the cleaning process. Required Skills and Competencies Must be dependable, willing to work additional hours as required and be team oriented. Ability to perform duties in accordance with training and standard operating procedures. Ability to work safely in and around heavy machinery in loud, hazardous and industrial settings. Qualifications Minimum 5 plus years of experience within the industrial cleaning industry preferred. Knowledge of chemical safety and handling procedures. Acceptable MVR/Background Check and pass pre-employment screenings. Valid TWIC Card. CDL with endorsements preferred. Work Environment Tools, equipment, machinery used: Hydroblasting, Vacuum Truck, and Tank cleaning equipment. Working conditions: Will be exposed to all weather conditions. Work on various structures and surfaces both at ground and elevated levels up to and possibly exceeding 150 ft. Work in confined spaces. Work a 12-hour shift with 30-minute lunch breaks. If requested, work overtime, and respond to emergency callouts whenever they occur. Work days, nights, and weekends. Travel to customer and other Miller sites as needed. Physical effort required: Handling tools, materials, and equipment weighing up to 150 lbs. Ability to lift up to 50 lbs. Must be able to sit, stand, walk, crawl, bend, squat, and kneel. Must be capable of climbing towers/vessels/tanks. #J-18808-Ljbffr CKM INDUSTRIES INC
- Trecora is seeking a Loader to review work orders, load and unload materials onto pallets, and operate a forklift in a manufacturing setting in Pasadena, TX. You will also handle inventory logs and support safety, housekeeping, and equipment inspections. The role requires...Suggested
- What You Will Do Operate D-10 Dozer equipped with concave blade attached across front to gouge out, level, and distribute petroleum from storage to re-claimer, from processing units/pit to storage in a safe and efficient manner. Operate bulldozer in successive passes over...SuggestedRemote workNight shiftWeekend workDay shift
- A Skid Steer /Mini -Ex Operator is responsible for safely operating and maintaining skid steer loaders to perform excavation, grading, material handling, and other construction or site-related tasks. Key Responsibilities Operate skid steer loaders and other compact construction...Suggested
- Westlake Chemical is seeking a Loader to ensure trucks are loaded accurately and on time. The role requires scanning items, following shipper documentation, and blocking loads securely for safe transit. You will work in a team environment, wear required PPE, and adhere ...Suggested
- ...Job Description HPC Industrial is seeking an Equipment Operator I for our national operations based out of Houston, TX . This position will be responsible for performing remote visual inspections (RVI) utilizing robotic crawler camera systems and borescopes at...SuggestedFull timeRemote work
- Kinder Morgan is seeking a Heavy Equipment Operator in Pasadena, TX. This role powers a D-10 Dozer and other gear to move and distribute petroleum safely between storage, reclaimers, and processing units. You will perform preventive maintenance, assist maintenance crews...Night shiftDay shift
$23 - $24 per hour
...Mobile Equipment Operator Location: 16915 Leonard Rd, Houston, TX, 77049, United States Employee Type: FT Non-Exempt Manage Others: No Contact information Name: Kyle Moser Phone: (***) ***-**** Email: ****@*****.***...Hourly payFlexible hours- G R Birdwell Construction is seeking a Heavy Equipment Operator to support sitework and earthmoving projects in Pasadena, TX. You will operate backhoes, excavators, rollers, dozers, and rough terrain forklifts under supervision, ensuring safe and productive operations....
- ...Shift Manual Machinist - VTLThe primary function of an RMS 2nd Shift Manual Machinist - VTL is to perform a variety of machining operations—specifically the set up and operation of the large VTL (up to 120" swing) on rotating equipment components such as pumps, turbines...Full timeLocal areaAfternoon shift
- G.R. Birdwell Construction in Pasadena, TX is seeking a Heavy Equipment Operator to support lay-outs, grading and trenching on industrial civil projects. You will operate backhoes, excavators, rollers, dozers and related equipment, maintain safe working procedures, set...
- ...The primary function of an RMS 2nd Shift Manual Machinist - VTL is to perform a variety of machining operations- specifically the set up and operation of the large VTL (up to 120" swing) on rotating equipment components such as pumps, turbines, and compressors. The Manual...Full timeLocal areaShift workAfternoon shift
$25 - $30 per hour
...Position: Manual Machinist Location: Pasadena, TX 77505 M-F 6AM - 3:30 PM with OT $25-$30/Hr Responsibilities: Set up and operate manual lathes, mills, and other machining equipment to produce parts according to engineering specifications Read and interpret...$35 - $45 per hour
...tight tolerances while maintaining safety and quality standards. RESPONSIBILITY: Principal Accountabilities Set up and operate manual lathes, Vertical Turret Lathes (VTL), and Horizontal Boring Mills (HBM). Machine pump components include shafts,...Hourly pay- Job Description Job Description Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise...Full timeTemporary workPart timeApprenticeshipFlexible hoursShift work
- ...grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.About the RoleSets up and operates machine tools, including HBM, VBM, lathes, milling machines, ID/OD grinders, planers, and bore, without assistance, following...Apprenticeship
- ...Functions: Uses a variety of tools to measure, calculate, cut and modify materials. Processes skills and knowledge to safely operate machine shop tools and equipment. Follows established manufacturing methods using standard machine tools, materials and equipment...Full time
- ...Industrial Machine LLC is a precision-focused metal fabrication and machining facility with over 40 years of industry expertise. Operating from Deer Park, Texas, the company serves customers worldwide with both custom and production-scale projects. Core Services •...Full timeWorldwide
- What You’ll Do Machining & Setup: Set up and operate manual lathes, milling machines, and/or CNC equipment to produce high-precision parts and instruments within tight tolerances. Blueprint & Tolerance Interpretation: Read and interpret complex engineering blueprints, schematics...
- ...adhering to all company HSEQ processes and procedures, reviewing and comprehending complex part drawings, and performing setup and operation of turning and milling equipment for critical tasks. Responsibilities include operating a 4-Jaw “Independent Chuck,” band saw, and...
- ...by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify,...Local areaWorldwide
- ...maintaining, troubleshooting, repairing, and aligning industrial machinery and mechanical equipment to ensure safe and reliable plant operations. This position works with pumps, conveyors, gearboxes, compressors, motors, turbines, blowers, industrial fans, and other...RelocationWeekend work
- Rotating Machinery Services, Inc. is seeking a 2nd Shift Manual Machinist to set up and operate a large vertical turret lathe (up to 120” swing) and conventional equipment to repair pumps, turbines, and compressors. You will read blueprints, measure parts with micrometers...Full timeAfternoon shift
$38 - $40 per hour
...collaboratively with other Multi-Skilled technicians under the direction of the Shop Foreman. Duties and Responsibilities Setting up and operating various machines and tool. Manual milling machines, lathes, vertical turning lathes, and milling machines - setup and operation...Work at officeLocal areaImmediate startFlexible hours- Afton Chemical in Pasadena, TX seeks a skilled Machinist to install, maintain, troubleshoot, repair, and align industrial machinery. The role involves handling pumps, gearboxes, motors, turbines, and pressure relief valves while following safety procedures and LOTO guidelines...
- ...high-quality components. The ideal candidate will have a strong background in mechanical manufacturing, blueprint reading, and the operation of various machine tools. This position offers an opportunity to work in a dynamic environment focused on precision and efficiency...
- Rotating Machinery Services Inc. in Pasadena, TX is seeking a 2nd Shift Manual Machinist to set up and operate a large VTL and other conventional machines to fabricate and repair components. The role requires blueprint reading, precision measurement, and strict tolerances...Full timeAfternoon shift
- Celeros Flow Technology is seeking a Machinist to interpret drawings and machine components with emphasis on pumps or rotating equipment. You will work in a shop environment with a safety-first mindset and collaborate with Multi-Skilled technicians under the Shop Foreman...
- Advanced Compressor Technology is seeking a skilled Machinist to join our manufacturing team. You will read blueprints, set up and operate manual machines (lathes, mills, drill presses, lapping machines, grinders, etc.) and program CNC machines to produce precision components...
- ...processes, CNC programming, and precision measurement to produce high-quality components. Responsibilities cover reading blueprints, operating manual machines, programming CNCs, inspecting parts, and maintaining safe, clean work areas. Candidates should have 10+ years’...
- ...Pasadena, TX is seeking a skilled Machinist to install, repair, align, and maintain industrial machinery and equipment critical to operations. You will work with pumps, conveyors, gearboxes, and valves, following safety procedures and quality standards. You will use...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Operator. Be the first to apply!
- refinery operator Deer Park, TX
- control operator Deer Park, TX
- ski lift operator Deer Park, TX
- hotel operator Deer Park, TX
- support operator Deer Park, TX
- operator unilever Deer Park, TX
- service operator Deer Park, TX
- soldering operator Deer Park, TX
- distribution operator Deer Park, TX
- operator Deer Park, TX


