Weld Engineer
Burger Boat
Welding Process Engineer
The Welding Process Engineer is a forward-thinking position, driving continuous improvement and technological advancement in our aluminum and steel shipbuilding operations. This role focuses on enhancing welding process capability and capacity, implementing automation, and optimizing production efficiency. The Welding Process Engineer will work closely with our Certified Welding Inspector (CWI), who leads WPS, PQR, and inspection activities, to ensure alignment between process development and quality assurance.
1. Analyze and improve welding process capability and throughput across aluminum, steel, stainless steel, and copper-nickel fabrication and welding areas.
2. Identify and implement opportunities for automation, robotics, and advanced welding technologies to increase efficiency and consistency.
3. Apply deep knowledge of welding metallurgy and materials science to understand and optimize weld behavior in both the weld metal and heat-affected zones of base materials.
4. Design and manage welding sequences to align with production stages and different vessel types. Coordinate across teams to ensure sequences meet structural and scheduling needs.
5. Document sequences visually for clarity and accessibility on the production floor.
6. Investigate and manage the interactions between welding gases, filler materials, and base metals to enhance weld quality, reduce defects, and improve vessel reliability and production efficiency.
7. Collaborate with the Certified Welding Inspector to ensure process improvements align with ABS and AWS standards and inspection requirements. 8. Lead root cause analysis and corrective actions for process-related welding issues, focusing on systemic improvements.
9. Collaborate with Quality and other Department staff to develop and maintain process documentation, including standard work instructions and process control plans
10. Evaluate new equipment, tools, and materials to support innovation in welding and fabrication.
11. Support lean manufacturing initiatives and continuous improvement projects across the production floor.
12. Monitor and report on key performance indicators (KPIs) related to welding productivity, quality, and cost.
13. Develop and qualify Welding Procedure Specifications (WPS) in accordance with applicable codes and standards to ensure consistent weld quality and compliance.
14. Provide training and technical support to welders, promoting best practices, proper techniques, and the adoption of new welding technologies.
15. Oversee weld inspections and coordinate nondestructive testing (NDT) activities to verify weld integrity and ensure compliance with quality standards.
16. Analyze welding-related costs and contribute to budgeting efforts, identifying opportunities for cost reduction and process efficiency.
17. Lead cross-functional engineering projects, including Design for Manufacturability (DFM) initiatives and new product introductions, to optimize welding processes.
18. Ensure compliance with environmental, health, and safety (EHS) regulations, maintaining a safe and compliant welding environment.
19. Implement and manage digital welding technologies, such as weld monitoring systems and traceability tools, to enhance process control and data-driven decisionmaking.
This position reports directly to the Director of Manufacturing and has no direct reports.
Demonstrates leadership through technical mentorship, cross-functional collaboration, and a commitment to team
Exercise judgment consistent with Burger’s mission, vision, and code of business conduct regularly and continuously. Makes informed decisions regarding welding processes, quality standards, and production support.
Shall demonstrate ability to effectively lead meetings and write professional correspondence. Great verbal and written communication skills, including the ability to listen, talk, and teach. Demonstrate an all-pervasive positive attitude.
1. Collaborate with engineering and design teams to ensure weldability of new designs.
2. Support/provide training and guidance to welders on new procedures and technologies.
3. Participate in audits and inspections by regulatory bodies.
4. Support the development of capital investment plans for welding equipment and infrastructure.
1. Bachelor’s degree in Welding Engineering, Mechanical Engineering, Materials Science, Industrial Engineering, or a related field.
2. 3–5 years of experience in welding process engineering, preferably in shipbuilding or heavy fabrication.
3. Strong understanding of ABS Part 2: Rules for Materials and Welding, AWS D1.1 (Steel), and AWS D1.2 (Aluminum).
4. Demonstrated expertise in welding metallurgy, including microstructure evolution, heat-affected zones, and mechanical properties of welded joints.
5. Experience with welding automation, robotics, and advanced manufacturing technologies.
6. Familiarity with lean manufacturing, Six Sigma, or similar continuous improvement methodologies.
7. Excellent analytical, communication, and project management skills. 8. Proficiency in CAD and process simulation tools is a plus.
This job operates in a shipyard manufacturing environment. This role must routinely use the personal protective equipment, tools, machinery, and products used in the welding department. The position also requires regular visits to the production floor, which requires climbing stairs and inspecting items in tight spaces. Exposure to weld gases, arches, sparks, flashes, paints, chemicals, fumes, airborne particles, moving mechanical parts, and other production operations is likely.
This description is a general statement of required major duties and responsibilities performed on a regular and continuous basis. It does not exclude other duties as assigned.
1st Shift Schedule: Similar to Monday - Thursday, 6:00am - 3:30pm, Fridays, 6:00am - 10:00am with some flexibility
- ...Now Hiring: Process Improvement Engineer Join the team at Eck Industries , a leader in aluminum casting and innovation for over 75 years. We're looking for a Process Improvement Engineer who will support the launch of new programs, drive process improvements,...SuggestedWork at officeImmediate start
- ...developing production processes for manufacturing operations consistent with team objectives. This individual will interact with product engineering, manufacturing, and quality functions. There are opportunities for January 2027 - August 2027 and May 2027 - December 2027....SuggestedPermanent employmentFor contractorsInternship
- ...Welding Supervisor This position oversees all welding practices and is responsible for implementing Burger’s welder qualification... ...along with Burger’s Director of Manufacturing and Director of Engineering. All must agree to the new procedures before any such change may...Suggested
$130k
...Fully remote, anywhere in the US near a major airport The consultancy Fire protection and life safety consulting engineering firm Growing its process safety team, with food manufacturing a big sector for the firm Salaried roles with flexible schedules...SuggestedRemote jobVisa sponsorshipFlexible hours$25 per hour
...Job Overview: Our client in Manitowoc is seeking a skilled Welder/Fabricator to join their growing team. This role focuses on MIG welding and fabrication of custom metal components from blueprints in a production environment. The ideal candidate will have hands-on...SuggestedTemporary workWork at officeFlexible hoursDay shiftAfternoon shift$24 - $31 per hour
...High School Diploma/GED is required, certification or degree in welding desired. REQUIRED EXPERIENCE - 1-3 years welding... ...and safety programs. Works with operations and weld engineering to execute various types of projects. Fit up parts prior...Full timeTemporary workImmediate startShift workDay shiftAfternoon shift$150 per hour
...Manufacturing Engineer Manufacturing Engineer (Direct Hire) Manitowoc, WI Do you enjoy being hands-on, solving real production challenges, and seeing your ideas make an immediate impact on the floor? We're looking for a Manufacturing Engineer who can drive continuous...For contractorsFixed term contractWork at officeImmediate start$32 per hour
...emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: MIG and TIG weld on Aluminum castings Repair defects Restore parts Inspect castings for cracks, shrinkage and other imperfections Clean and...Work at officeImmediate startAfternoon shift- ...Manufacturing Engineer At KI, we believe knowing our customers helps us serve them better. We listen. We observe. We understand that each customer has unique needs. So, we pride ourselves on helping our customers make smart furniture decisions by offering expert advice...Temporary workWork at office
- Job Title: Nuclear Engineer (Naval Reactors Engineer) Category / Component: Officer • Active Overview Design, regulate, and oversee the Navy’s nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear...Contract workApprenticeshipWork at office
- ...dental, disability, prescription & vision)ResponsibilitiesAnalyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.Check grooves, angles, or gap allowances, using...Shift workWeekend workDay shiftAfternoon shift
$22 - $26 per hour
...Job Description We are seeking a dependable Assembly Welder to join our manufacturing team. The ideal candidate will have Mig welding experience, mechanical aptitude, and the ability to assemble metal components according to blueprints and specifications. Apply with...Weekly payAfternoon shift- ...JOB OVERVIEW The Welder/Fabricator cuts, fits, tacks, welds, and assembles metal components and fabricated structures using... ...custom fabrication work in accordance with safety requirements, engineering drawings, weld-quality standards, dimensional tolerances, and production...Full timeLocal areaShift work
- ...to: Production Supervisor Classification: Non-Exempt / Hourly Assembler-Welder (Enclosure Department – Assembly with Light Welding) Job Summary We are seeking a reliable and detail-oriented **Assembler-Welder **to join our Enclosure Department. This position...Hourly payShift workNight shiftDay shift
$32 per hour
...emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: MIG and TIG weld on Aluminum castings Repair defects Restore parts Inspect castings for cracks, shrinkage and other imperfections Clean...Work at officeImmediate startAfternoon shift- ...work there. This is a state-of-the-art production facility that manufactures architectural wood doors. They need a Manufacturing Engineer. This is a "hands-on" role that requires flexibility and the desire to be part of a team! If you have a passion for Process...Casual workRelocation
- Transportation Security Inspector – Aviation Opportunities in Manitowoc Transportation Security Inspectors help ensure that airports, air carriers, cargo facilities, and other regulated aviation organizations follow federal transportation-security requirements. Rather...Full timeWork at officeLocal areaFlexible hoursNight shift
- Manufacturing Support Engineer Be a part of an organization, with a dynamic leadership team that truly values and appreciates the people that work there. This is a state-of-the-art production facility that manufactures architectural wood doors. They need a Manufacturing...
$80k - $95k
Job Description Manufacturing Support Engineer \n Manitowoc, WI \n $80,000 to $95,000 per year \n A growing, privately held architectural wood door manufacturer is seeking a Manufacturing Support Engineer for its state-of-the-art production facility. This is a hands...Full time- ...Job Description Job Description SUMMARY: Welders/Shipfitters are expected to perform certified aluminum welding in all positions with either MIG or TIG machines to classification society requirements, whether in shops or on boats. Must be able to work from drawings...Immediate startMonday to FridayFlexible hoursShift workDay shift
- The Manufacturing Support Engineer II will be responsible for solving hands-on manufacturing problems to help improve the day-to-day performance of manufacturing operations while working closely with Production, Continuous Improvement, Maintenance, and Engineering. This...Work experience placement
- ...performance. Responsibilities Perform dimensional inspections using CMM equipment and applicable software programs. Interpret engineering drawings, GD&T requirements, specifications, and quality standards. Develop, validate, and execute CMM inspection programs as...Contract workTemporary workFor contractors
- ...the inspector will perform general quality control (QC) inspections for other areas of tank and enclosure manufacturing, including welding, assembly, paint, and material handling. IES is a national provider of industrial products and infrastructure services to a variety...Contract workTemporary workFor contractors
$22 - $26 per hour
...Assembly WelderWe are seeking a dependable Assembly Welder to join our manufacturing team. The ideal candidate will have Mig welding experience, mechanical aptitude, and the ability to assemble metal components according to blueprints and specifications. Apply with a resume...Afternoon shift- Quality Control Inspector Production Job category: Individual contributor Management Division: Scented & Living Solutions - Department: Quality - Location: Manitowoc, WI Description / Scope / Mission Conduct assigned Quality Control checks to ensure all manufactured products...Shift work
$85k - $115k
...Continuous Improvement Engineer Position Overview Join Eck Industries as a Continuous Improvement Engineer and play a key role in driving operational excellence across our manufacturing operations. This hands-on, shop floor-focused position partners closely with...Internship- ...Job Description Job Description POSITION SUMMARY: The Engineering Leader for MEP Systems is first and foremost a leader of... ...experience in mechanical/MEP systems and metal fabrication, including welding, forming, machining, and assembly, with the ability to...Contract workFor contractorsWork at office
$91.1k - $134k
...Title: Electrical Engineer Location: Manitowoc, WI Salary: $91,100- $134,000 Schedule: On-site daily Websites: Winchester.com Focus: We are seeking a motivated and experienced Electrical Engineer to join our team. In this pivotal role, you will be...Permanent employmentTemporary workWork at officeShift work- ...Position Summary The Quality Engineer Iimplements and assures alignment to the Parker Quality Process (PQP) to ensure that products, services and processes are consistently meeting defined quality standards and customer expectations. This role executes structured...Permanent employmentFor contractors
- Select how often (in days) to receive an alert: Customer interfacing for quality concerns and issues Develop and maintain quality systems required to provide customer satisfaction Advanced Quality Planning interface with customers Oversee receiving inspection...Shift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Weld Engineer. Be the first to apply!





