CNC Operator

$22 - $30 per hour

Weco Manufacturing Group

Summary: The CNC Machinist is responsible for the safe operation and set up of a wide variety of Computerized Numerical Control Machining Centers (CNC) or other production machines using programs and tooling that have been previously used to manufacture a product and is capable of doing this with little supervision.

Must work with Management to debug and optimize manufacturing processes for jobs or machines which they are responsible.
Must demonstrate a very high level of competency with all types of metal working equipment, both manual and CNC.
Must demonstrate the ability to debug machining processes and communicate those processes for manufacturing.
Must be able to diagnose process problems and determine the cause of the problem.
Must be able to implement corrective action to prevent reoccurrence of problems.
Must be aware of the budget and delivery requirements for work assigned to them and report to management any difficulties that would cause the cost of the work to exceed budget or miss a scheduled delivery.
Must have a thorough understanding of safe operation of metal working equipment, including but not limited to starting and stopping the machining cycle, interrupting the machine cycle, performing offsets to tool length and diameter and restarting the machining cycle.
Must have a thorough knowledge of CNC program code and be able to document and perform edits of the code to enhance machining processes.
Installs machining fixtures and tooling using Tool Sheet and Setup instructions with no supervision.
Orients fixtures and tools to machine coordinate systems, inputs machine, fixture and tool offsets.
Loads appropriate CNC program into machine control.
Loads material into holding fixtures, following verbal and/or written instructions.
Produces "first piece" from setup while observing machining cycle to prevent damage to work piece, tooling, machine or injury to operator.
Must be able to read, understand and interpret blueprints and specifications, including GD&T.
Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools.
Performs a variety of inspection and gaging operations to insure maintenance of quality standards and specifications and have the ability to record the results of these inspections.
Notifies supervisor of discrepancies.
Must be able to train CNC Operators in the safe operation of the machines that they have set up.
Cleans machine, tooling, and parts as instructed.
Performs daily preventative machine maintenance as instructed.
Other duties as assigned.

Requirements

Education

High school diploma or general education degree (GED) required.
5+ years related experience and/or training; or equivalent combination of education and experience required.

Skills:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, mechanical drawings and specifications.
Ability to write routine reports and correspondence.
Ability to speak effectively before groups of customers or employees.
Ability to add and subtract four-digit numbers and to multiply and divide.
Ability to perform these operations using units of measurement, volume, and distance. Basic understanding of Geometry and Trigonometry.
Ability to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form.
Ability to deal with problems involving several variables in situations requiring a high level of judgment and reasoning.
Microsoft Office Suite
Epicor Vista™ integrated manufacturing and accounting solution
Adobe Acrobat
Windows Operating Systems
Internet Explorer or equivalent
Must be able to read, understand and interpret mechanical drawings.
Working knowledge of "G" & "M" Codes is required.
Demonstrate a working understanding of CNC Machine Coordinate Systems.
Demonstrate competency on a wide variety of machines and controls.

Salary Description

$22.00 - $30.00 per hour depending on experience

Apply

Vacancy posted 5 days ago

Similar jobs that could be interesting for youBased on the CNC Operator in Henrietta, NY vacancy

CNC Operator
$22 - $30 per hour
...CNC Operator Henrietta, NY ( Description Summary:The CNC Machinist is responsible for the safe operation and set up of a wide variety of Computerized Numerical Control Machining Centers (CNC) or other production machines using programs and tooling that have been...
Suggested
Hourly pay
Work at office
Weco Manufacturing
Henrietta, NY
5 days ago
CNC Operator
$19 - $25 per hour
...Adecco is seeking experienced CNC Operator to join our manufacturing team in Henrietta, NY. This position is responsible for setting up, operating, and troubleshooting CNC machines while meeting production, quality, and efficiency goals in a fast-paced manufacturing environment...
Suggested
Hourly pay
Temporary work
Local area
Adecco US, Inc.
West Henrietta, NY
2 days ago
CNC Operator
$22 - $32 per hour
...Job Title: CNC Setup / Operator Location: Rochester, NY Employment Type: Full-Time | Direct Hire Summary: Nesco Resource is seeking a skilled CNC Setup / Operator to join a manufacturing team in Rochester, NY. This role is responsible for setting up and...
Suggested
Full time
Temporary work
Local area
Monday to Friday
Shift work
NESCO Inc
West Henrietta, NY
2 days ago
CNC Operator 1 B-Shift
...Title CNC Operator 1 Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of...
Suggested
Permanent employment
Temporary work
Monday to Friday
Flexible hours
Shift work
Rochester Precision Opt
West Henrietta, NY
4 days ago
CNC Machinist
$23 - $34 per hour
...Job Description Job Description CNC Machinist – West Henrietta, NY Hours: Mon–Fri | 7:00 AM – 3:30 PM Pay: $23.00 – $34... ...from setup through completion. What You’ll Do Program and operate Tsugami Swiss Lathes, CNC mills, and lathes Machine precision...
Suggested
Local area
Immediate start
Kelly
West Henrietta, NY
11 days ago
CNC Operator
$24 - $28 per hour
...Job Description Job Description Overview The CNC Operator is responsible for operating CNC equipment within the Turning, Milling, or Swiss department while ensuring all parts meet quality and customer specifications. This role requires strong blueprint reading...
Flexible hours
Shift work
Day shift
Afternoon shift
Laborup
Rochester, NY
17 days ago
CNC Machinist
...General Information Name CNC Machinist Employment Type Direct Hire Position level Full-time Virtual/Remote? No Labor Category Light Industrial Date 30-Apr-2026...
Full time
Remote work
Kelly Services, Inc.
West Henrietta, NY
4 days ago
CNC Machine Operator - Structural Steel
...prime paint finished products and load trucks for delivery. CNC machines include Ocean Clipper II angle line to process angle iron... ...and railings. We are seeking a detail-oriented CNC Machine Operator to operate and maintain CNC fabrication equipment used in structural...
Rochester Structural
Rochester, NY
a month ago
CNC Operator
...CNC Operator: We are looking for a CNC Operator with a minimum of 3+ years experience, to operate a Thermwood 3-axis router. The successful candidate will be required to set-up, cut, and label materials according to the production schedule. The operator will be expected...
Local area
Monday to Friday
Shift work
Ikoniq
Rochester, NY
5 days ago
CNC OPERATOR
$17 - $29 per hour
...Full Time Advantech Industries Inc., Rochester, NY, US Salary Range: $17.00 To $29.00 Hourly CNC OPERATOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication,...
Hourly pay
Permanent employment
Full time
Monday to Friday
Flexible hours
Advantech Industries
Rochester, NY
3 days ago
CNC Operator IV
$25 - $32 per hour
...Job Type Full-time Description Position Summary Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on...
Hourly pay
Full time
Temporary work
Flexible hours
PGM Corporation
Rochester, NY
5 days ago
CNC Mill Setup/Operator
...Tool and Manufacturing, a division of KRO Industries, is a leading and growing provider of CNC machining services in Rochester, NY. Role Description CNC Mill Set-up / Operator at Dixon Tool and Manufacturing. Full-time preferred, but will consider part-time...
Full time
Part time
Work experience placement
Monday to Friday
KRO Industries LLC
Rochester, NY
18 days ago
CNC Lathe Machinist - A & B Shifts
$20 - $35 per hour
...CNC Lathe Machinist - A & B Shifts CNC Lathe Machinist - A & B Shifts Location: Brinkman Precision Inc./West Henrietta, NY... ...to join our growing team. Job Responsibilities: Set up, operate, and maintain CNC lathes to produce precision components according...
Full time
Temporary work
Shift work
Brinkman Precision, Inc.
West Henrietta, NY
3 days ago
CNC Lathe or Mill Operator
Job Description Job Description IMMEDIATE POSITION OPEN - MINIMUM LEVEL OF EXPERIENCE REQUIRED Positions available for machining low to mid volume close tolerance parts in local shop. Are you detail oriented? Mechanically inclined? Like a fast paced environment?...
Local area
Immediate start
Morgood Tools
Rochester, NY
19 days ago
CNC Machinists & EDM Operators - Multiple Openings (A, B & C Shifts)
$25 - $40 per hour
...CNC Machinists & EDM Operators - Multiple Openings (A, B & C Shifts) Location: Brinkman Products, Inc. (Davenport & CJ Winter Divisions) Job Type : Full-Time Shifts: A, B & C Pay: $25.00 to $40.00/hr. based on job level & experience About Us Brinkman...
Full time
Currently hiring
Flexible hours
Shift work
Weekend work
Davenport Machine Inc
Rochester, NY
5 days ago
B-Shift CNC Operator
...Type Full-time Description Job Title: B-Shift Mill Operator Location: 50 Jetview Drive Rochester, NY 14624 Reports to... ...Machine Operation: Operate milling machines, including CNC mills, vertical and horizontal mills, to produce parts according...
Full time
Immediate start
Shift work
XLI Manufacturing LLC
Gates, NY
2 days ago
CNC Lathe Setup Operator - Rochester, NY area
$28 per hour
...CNC Lathe Setup Operator - Rochester, NY area please click here to Submit your Resume (****@*****.***) Please attach your resume in one of these file formats: doc, docx, docm, odf, odt, pdf, wpd. Our client is looking for a candidate to be responsible...
Hourly pay
CNY Outsourcing
Rochester, NY
5 days ago
CNC Machining Professionals (Operator, Programmer, Set-Up, Lathe & Boring Mill)
$22 per hour
...CNC Machining Professionals (Operator, Programmer, Set-Up, Lathe & Boring Mill) Yoh is looking for CNC Professionals to join our client in Rochester, NY. These positions are Temp to Hire/Will consider Direct Hire for the right candidate. Estimated Min Rate...
Temporary work
Yoh
Rochester, NY
2 days ago
CNC BORING MILL SETUP / OPERATOR
$22 - $34 per hour
...Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility... ...rules and guidelines regarding CNC horizontal boring mill operation and proper guarding. Move raw material to machine area,...
Permanent employment
Relocation package
Precise Tool, Advantech and Big City
Gates, NY
4 days ago
Senior CNC Lathe Operator
$28 - $32 per hour
...Job Description Senior CNC Lathe Operator PeopleReady of Rochester, NY is now hiring Senior CNC Lathe Operators in Rochester, NY! Responsible to the set up and operation of CNC lathe machines. Senior position with responsibility of loading programs and troubleshooting...
Hourly pay
Temporary work
Local area
Immediate start
Shift work
Night shift
PeopleReady
Gates, NY
5 days ago
Warehouse CNC Operator
$21 - $25 per hour
...Adecco is hiring immediately for Warehouse CNC Operators in Rochester, NY. While working as a Warehouse CNC Operator for Adecco, you will earn $21.00-$25.00/hour + other great benefits! In this role, you will support precision manufacturing operations. The Warehouse...
Hourly pay
Weekly pay
Temporary work
Local area
Immediate start
Shift work
Adecco Colombia S.A.
Rochester, NY
4 days ago
CNC Programmer
...Job Description Job Description Job Summary: The CNC Programmer is responsible for driving improvements in the performance and capabilities of our precision machining operations that include CNC Milling and Turning equipment. They will lead focused projects to...
Work experience placement
Work at office
Syntec Optics
Rochester, NY
a month ago
CNC Machinist
...Job Title: CNC Machinist 4 - 10 hour days - Fridays off $5,000 signing bonus FLSA Status: Non-exempt GENERAL... ...AND RESPONSIBILITIES include the following. 1. Set up and operate any CNC Cell safely and productively. 2. Perform first...
Relocation package
Techniks Inc
Fairport, NY
3 days ago
3rd Shift CNC Machinist
$54k - $66k
...CNC Machinist Are you an experienced CNC machinist with lathe setup and operating experience? We are seeking tenured CNC machinists to set up, operate, and troubleshoot our machines and assist in our high-volume production process. This would also include but not limit...
Night shift
Randstad
Rochester, NY
7 hours ago
Punch Press Operator
$23 - $30 per hour
...Punch Press Operator Nesco Resource is seeking a Punch Press Operator to join a manufacturing team in Rochester, NY. This role is responsible for producing high-quality parts on punch press equipment while maintaining safety, efficiency, and quality standards. The...
Temporary work
Local area
Monday to Friday
Shift work
Afternoon shift
NESCO Inc
West Henrietta, NY
6 hours ago
CNC Set-Up Machinist
$30 - $34 per hour
...The CNC Set-Up Machinist is responsible for programming, setting up, and machining complete parts from detailed technical drawings... ...setups including tooling selection and workholding Load parts, operate controls, and verify first-piece quality Read and interpret detailed...
Full time
Shift work
Day shift
Afternoon shift
Laborup
Rochester, NY
7 hours ago
CNC Machinist
...Job Type Full-time Description Position Summary: Responsible for operating CNC equipment and using proper measuring equipment to verify quality of the product. What We Offer Competitive salary based on experience Career development opportunities...
Full time
Work at office
Flexible hours
Shift work
Addison Precision Manufacturing
Rochester, NY
2 days ago
CNC Machinist 2nd Shift
...good tooling and machining background. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. 1. Set up and operate any CNC lathe/mill machine safely and productively. 2. Perform first piece and in-process inspections. 3. Load parts into machines....
Relocation package
Shift work
Afternoon shift
Techniks Inc
Fairport, NY
2 days ago
3rd shift cnc machinist
$54k - $66k
Are you an experienced CNC Machinist with lathe Setup and Operating experience? We are seeking tenured CNC machinists to set up, operate, and troubleshoot our machines and assist in our high-volume production process. This would also include but not limit to blueprint...
Permanent employment
Temporary work
Work experience placement
Shift work
Night shift
Randstad
Gates, NY
3 days ago
CNC Machinists/Grinders 4 Day Work Week!
$27 - $40 per hour
...available! Our client in Upstate, NY is looking for experienced CNC Machinists and CNC Grinders. This is for their 4 day Mon through... ...Description: We are looking for a competent CNC Setup - Operator to use computer numerically controlled (CNC) machinery safely...
Relocation package
Weekend work
Afternoon shift
SkillSource Tech
Rochester, NY
5 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to CNC Operator. Be the first to apply!