Welder
DEPARTMENT OF THE NAVY HEADQUARTERS
Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Welder in El Cajon, CA vacancy
$35.36 - $38.71 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according to specifications...SuggestedHourly payLocal areaFlexible hoursShift work$35 - $45 per hour
A leading provider of building automation, control, analytics, and energy management solutions This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $35 - $45 per hour...SuggestedHourly payLocal area- .../vacation policy Paid holidays Bonus programs Tuition reimbursement/training Job Details We are seeking a skilled Welder / Fitter to support the fabrication and assembly of metal components and welded structures. This role requires experience with TIG...SuggestedLocal areaMonday to FridayDay shiftAfternoon shift
- Job Title Joins, fabricates and repairs metal and other weld able material by applying appropriate welding techniques. Typical Working Conditions Many of the job responsibilities will be conducted in exterior and interior areas of the operation. Exterior activities...SuggestedApprenticeshipLocal area
$34 - $40 per hour
...moderate physical exertion, including lifting, bending and considerable time standing. Minimum five (5) years experience as a combination welder. Must be able to weld ferrous and non-ferrous metals.ResponsibilitiesAble to perform radiographic quality welding.Able to read...SuggestedHourly payTemporary workFlexible hours- ...PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has multiple positions open for Welder Journeyman , with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is...For contractors
- Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and...Relocation
$160 per hour
...Pipe Welder Labor One is currently hiring pipe welders in San Diego, CA at a shipyard.$160 per diem, if eligible. Job requirements: Three years of experience in welding Knowledge of welding procedures and various types of welding equipment Proficient...Daily paidCurrently hiringShift work$100k - $140k
A Self-Performing General Contractor with over 75 years experience in Columbus, we are seeking an experienced Concrete Superintendent to join our team. This Jobot Job is hosted by: Collin Walsh Are you a fit? Easy Apply now by clicking the "Apply" button and sending...For contractorsFor subcontractorLocal area$25 - $30 per hour
...Welder/Fitter (1st Shift) Company: TriMas Company LLC Primary Location: 1451 N Johnson Ave, El Cajon, CA 92020 USA Workplace Type: On-site Employment Type: Hourly | Full-Time Function: Manufacturing Production / Distribution Equal Opportunity Employer...Hourly payPermanent employmentFull timeTemporary workFlexible hoursDay shift- ...Summary You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$28 - $32 per hour
...tack and weld production hardware using both auto and manual TIG welding techniques on a variety of metals. Acts as mentor for junior Welders. May work with engineering to resolve problems and develop new processes and/or procedures. Job Responsibilities Performs TIG...Hourly pay$29 - $40 per hour
\#jobalert | DIRECT PLACEMENT | FABRICATOR WELDER | San Diego, CA A long-standing, stable metal fabrication company is hiring an experienced Fabricator Welder to join a growing shop that supports U.S. Navy ship and submarine modernization work, along with commercial...Hourly payFull timeSeasonal workMonday to FridayShift work$32.52 - $48.78 per hour
...where we work and live. Together, we are building a better world, so we can all enjoy living in it.This position is for experienced welders who are able to use the necessary equipment for MIG and TIG welding of structures, enclosures, pipes, and other components, as well...Part timeCurrently hiringFlexible hours$33.76 - $37.11 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks...Hourly payLocal areaFlexible hoursShift work$25 - $30 per hour
...Welder/Fitter Weekend ShiftCompany: TriMas Company LLCPrimary Location: 1451 N Johnson Ave, El Cajon, CA 92020 USAWorkplace Type: On-siteEmployment Type: Hourly | Full-TimeFunction: Manufacturing Production / DistributionEqual Opportunity Employer Minorities/Women/Veterans...Hourly payTemporary workFlexible hoursShift workWeekend work$20 - $22 per hour
Responsive Recruiter Benefits: 401(k), 401(k) matching, opportunity for advancement, training & development Job Summary ~ Support other personnel as required, including (but not limited to): cutting, grinding, cleaning, tacking, etc. ~ Lifting 50lb. ~ General...Hourly payMonday to FridayShift work$25 - $30 per hour
2nd Shift Welder Fitter $25-$30/hr+ - EL Cajon, 92020 - Mon through Thurs 4pm-2:30am Job Description We are seeking a skilled welder fitter to perform TIG/MIG welding on assemblies, assisting the journeyman welder with fit-up and fabrication. This role requires...Weekly payContract workTemporary workAfternoon shift- ...About the job Sheet Metal TIG Welder Talent Source is looking for an experienced Sheet Metal TIG Welder to join our team. The ideal candidate will have a strong background in TIG welding with a focus on sheet metal fabrication, an eye for detail, and the ability...
$20 - $25 per hour
Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and ...Temporary workAfternoon shift$20 - $25 per hour
Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and ...Temporary workNight shift- ...office Equipment & Tools: PC, MS Office Suite, Dispatch software Physical Demand Level: Light to Moderate Work Capacity: Welder Work Capacity Sensory Demands: Hearing & vision Hand Movements: Repetitive motions, keyboard Equal Opportunity Employer...Shift work
- ...lifelong work opportunities in diverse areas of the economy? Well, if any of this describes you, then we'd love to talk to you about a Welder position. Your Day The job responsibilities may include the following: Using hand-held or remotely controlled welding...ApprenticeshipRemote workShift workWeekend workAfternoon shift
$37.34 - $40.69 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance required Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other ...Hourly payLocal areaFlexible hoursShift work- Must have experience welding fabricated cast or forged components. Welds parts in position for fabrication of vessels, tanks or other structural assemblies. Uses carbon electrodes to cut, shape, and groove metal. May prepare workplace for welding by cleaning...All shifts
$30 - $35 per hour
...Welder/Metal Fabricator RASIRC is seeking a passionate and dynamic Welder/Metal Fabricator to join our team and drive innovation in our Manufacturing department. If you're someone who thrives in a fast-paced environment, enjoys collaborating with diverse teams, and...Permanent employment- Job Title Job Description Help Duties You will be identifying and associating metals, alloys and filler metal by color code and standard markings. You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests. You...
- ...About the job Structural Welder As a Structural Welder at Talent Source, you will play a crucial role in fabricating and welding structural components for marine vessels within the shipyard environment. Below are the key responsibilities and requirements for...
$21.92 - $32.69 per hour
Position SummaryThe Plater in the Electroplating Lab performs production plating operations on high?precision RF connector components while maintaining proper chemical bath conditions. This role combines hands?on plating with routine wet chemistry control to ensure consistent...Temporary work- ...Job Description Job Description Benefits/Perks ~ Competitive Pay Job Summary We are seeking a skilled Welder to join our team. In this position, you will need accurately weld structural components and parts, in a residential complex. This is an integral...Local area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder. Be the first to apply!

