Engineer II
$25 - $28 per hourArtech LLC
Job Description
Entry-level Data Center Technician responsible for hardware installation, cabling, and basic network support within a data center environment. This role supports physical infrastructure operations, including rack/stack activities, structured cabling (copper and fiber), and documentation. Key Responsibilities:
" Install, rack, and stack servers, network devices, and related hardware in data center cabinets.
" Perform structured cabling tasks, including installation, routing, labeling, and troubleshooting of copper (Cat5e/Cat6) and fiber optic cabling.
" Support basic network device provisioning and connectivity, including entry-level Cisco switch configuration and troubleshooting.
" Maintain accurate documentation using tools such as Client Visio for rack elevations, cabling diagrams, and floor layouts.
" Assist with power distribution (PDUs), cable management, and ensuring adherence to data center standards and best practices.
" Perform hardware replacements (break/fix) and assist with troubleshooting physical layer issues.
" Follow operational procedures, safety guidelines, and change management processes. Required Skills & Qualifications:
" Basic understanding of data center operations and hardware installation.
" Familiarity with copper and fiber cabling standards and best practices.
" Working knowledge of Cisco networking fundamentals (CLI basics, VLANs, connectivity checks).
" Experience with Visio or similar diagramming/documentation tools.
" Strong attention to detail, organization, and ability to follow procedures.
" Ability to lift and move equipment (up to typical DC standards, e.g., 40 50 lbs). Preferred (Optional):
" CompTIA Network or similar certification.
" Exposure to DCIM tools or ticketing systems.
" Basic understanding of structured cabling standards (TIA/EIA).
Job Description
Job title : Data Center Technician / Systems Engineer (Racking & Infrastructure Support)
Location : Fort Worth, TX (onsite)
Duration : 12 months
Pay Range: $25/hr - $28/hr
Entry-level Data Center Technician responsible for hardware installation, cabling, and basic network support within a data center environment. This role supports physical infrastructure operations, including rack/stack activities, structured cabling (copper and fiber), and documentation. Key Responsibilities:
" Install, rack, and stack servers, network devices, and related hardware in data center cabinets.
" Perform structured cabling tasks, including installation, routing, labeling, and troubleshooting of copper (Cat5e/Cat6) and fiber optic cabling.
" Support basic network device provisioning and connectivity, including entry-level Cisco switch configuration and troubleshooting.
" Maintain accurate documentation using tools such as Client Visio for rack elevations, cabling diagrams, and floor layouts.
" Assist with power distribution (PDUs), cable management, and ensuring adherence to data center standards and best practices.
" Perform hardware replacements (break/fix) and assist with troubleshooting physical layer issues.
" Follow operational procedures, safety guidelines, and change management processes. Required Skills & Qualifications:
" Basic understanding of data center operations and hardware installation.
" Familiarity with copper and fiber cabling standards and best practices.
" Working knowledge of Cisco networking fundamentals (CLI basics, VLANs, connectivity checks).
" Experience with Visio or similar diagramming/documentation tools.
" Strong attention to detail, organization, and ability to follow procedures.
" Ability to lift and move equipment (up to typical DC standards, e.g., 40 50 lbs). Preferred (Optional):
" CompTIA Network or similar certification.
" Exposure to DCIM tools or ticketing systems.
" Basic understanding of structured cabling standards (TIA/EIA).
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Engineer II in Fort Worth, TX vacancy
$89.2k - $134.3k
...SUMMARY BLUvera, Mortenson’s vertically integrated manufacturing and fabrication business, is seeking a Manufacturing Engineer II to help develop, improve, and scale the processes, equipment, and technologies behind a growing manufacturing operation. This is a highly...SuggestedH1bWork at office- Join to apply for the Project Engineer II role at RECARO Aircraft Seating . Job Type Full-time Position Summary Responsible for coordination of all technical activities on assigned projects. Plans, schedules, conducts, and coordinates assigned engineering work; monitors...SuggestedFull timeContract workOverseas
- About Us:BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed... ...business to build a better world.Job Description:Controls Engineer II or IIIWho You’ll Work WithYou will join one of our 45 offices...SuggestedFull timeFlexible hours
$81.8k - $110.4k
...Safety Engineer II SUMMARY Mortenson is currently seeking a passionate Safety Engineer II who can interact with a variety of staff at all levels in an ever-changing environment, remaining flexible, resourceful, proactive, and efficient with a high level...SuggestedFor subcontractorH1bWork at officeLocal areaFlexible hours- ...with good enough? Does solving complex problems and ensuring top-quality applications excite you? If so, being a Quality Automation Engineer II with Frost could be for you.At Frost, it’s about more than a job. It’s about having a flourishing career where you can thrive,...SuggestedFull time
- A leading aircraft seating manufacturer in Fort Worth, Texas is seeking a Project Engineer II to oversee technical activities on crucial projects. The candidate will coordinate design efforts, ensure compliance with FAA/EASA regulations, and communicate effectively across...
- ...Job Description Job Description Job Title: Engineer II Job Location - Fort Worth, TX Duration - 12 monthsSummary Entry-level Data Center Technician responsible for hardware installation, cabling, and basic network support within a data center environment...
- About Us:BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed... ...fulfillment. When you join Design Group as a Project Engineer II, you are joining a team that will challenge you and position you...Full timeFor subcontractorFlexible hours
- ...technology company engaged in a wide range of programs for innovative defense and commercial applications. Job Summary: The Systems Engineer II supporting our CTSE program, participates in the design, development, testing, and analysis of products, equipment or processes;...Contract workFlexible hours
- Position Overview Power your future with Qualus in our Engineering department as an Engineer II- Electrical. In this role, you will execute electrical engineering and power system projects of low to medium complexity with limited oversight, from field-data review and...Temporary workFlexible hours
- ...Job Description Job Description Job Title: R&D Engineer, Ocular Health Packaging & Device Location: Fort Worth, TX 76134 Duration: 12 months (with a possibility to extend). Schedule: 40 hours per week, Monday - Friday. Top 3 must haves: oHands-on...Monday to Friday
- ...projects, as it pertains to IFE/Electrical or Actuation systems. Plans, schedules, conducts, and coordinates assigned electrical engineering work; monitors work for compliance to applicable Airframe requirements, IFE supplier requirements, customer requirements, accepted...Contract workWork at officeOverseas
- ...Job Description Job Description Description: Position Summary: The Certification Engineer II is responsible for working as part of the certification team along with the internal program team, installers (TC/STC holders, MROs), suppliers, FAA, EASA and designees to...Work at office
- ...Job Description Job Description Description: Position Summary: The Certification Engineer II is responsible for working with the internal program team, installers, suppliers, FAA, EASA and designees to research and to plan and execute large and small scale certification...
- Digital Workplace Engineer II Transform the Employee Experience Through Technology Who We Are For more than 120 years, Ben E. Keith has served customers and communities as one of the nation’s leading distributors of foodservice products and premium beverages. Our success...
- ...work cross-functionally across the organization including Quality, Program Management, Logistics, Production Control, Industrial Engineer, and Manufacturing. This position is responsible for executing change using process improvement methodologies, assisting in implementing...Work at officeFlexible hours
- ...is a trademark of NCR Corporation in the United States and other countries. NCR Voyix Corporation Fort Worth, TX Software Quality Engineer II (f/t) : 1. Developing and configuring automation and ensuring continuous delivery of NCR's Software Solutions. 2. Creating and...Full timePart timeRemote work
- ...PRIDE Industries Job Description Job: HVAC Mechanic II Job Code: J64 - WF-HVAC Mechanic II SCA Occup: 23410... ...metalworking tools and welding equipment, follows blueprints or engineering specifications; 8. Fabricates, assembles and installs ductwork...Contract workWork experience placementWork at officeLocal area
- ...Responsibilities for this Position Liaison Stress Service Engineer CS SVC Tech Spec II - Ft. Worth, TX Liaison Stress Service Engineer CS SVC Tech Spec II - Ft. Worth, TX in GAC Fort Worth Unique Skills: At Gulfstream, our people are at the heart of...Full timeShift work
$93k - $112k
...precision weapons and unmanned aircraft systems (UAS). Our team of engineers and innovators are developing cutting-edge autonomous solutions... ...technology, you belong here. Our Electrical Engineer I/II is an early-career role responsible for supporting the design, development...Full timeFor contractorsInternship- Job Description Job Description Join Our Team as a Data Center Technician in Fort Worth, TX! Are you passionate about technology and looking to kickstart your career in a dynamic environment? Join us as a Data Center Technician in Fort Worth, TX, where you'll play ...
- ...technology company engaged in a wide range of programs for innovative defense and commercial applications. Job Summary: The Quality Engineer I is responsible for supporting product and process quality throughout the manufacturing lifecycle in a highly regulated aerospace...Contract workInternshipFlexible hours
- What We're Looking ForJoin HNTB as Roadway Engineer II in Fort Worth, Texas where you can create a career that is meaningful to you while building communities that matter to all of us! Our office has an extensive history delivering exciting and complex transportation projects...Full timeWork at officeLocal area
- Additional Information Job Number 26144163 Job Category Engineering & Facilities Location 200 Main Street, FORT WORTH TX 76102, United States VIEW ON MAP Schedule Part Time Located Remotely? N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair...Part timeWork experience placementRemote workShift workAfternoon shift
$66.94k - $101.26k
...experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview...Minimum wageFull timeWork experience placementWork at officeLocal areaRemote workFlexible hours- ...Conservation - to observe energy and utilities usage in The Hotel. To look for ways to conserve energy and report any ideas to the Engineering Management. Willingness to be trained and comprehend the OSHA rules and regulations. Willingness to be trained on where all...Shift work
$119k - $154k
...customers. Are you ready to join us This role is part of Alcons Engineering function a team focused on improving quality processes... ...much more! This position can be offered at a Principal I or II Manufacturing Production Process Engineering level depending on...Hourly payFull timeRelocationFlexible hours- ...and customer focus to the business.At Simmons Bank, the Security Engineering Team is responsible for the design, implementation, and... ...day-to-day operation of the Information Security Program. Level II Security Engineers are primarily responsible for the implementation...Full time
- ...including Quality, Program Management, Logistics, Planning, Industrial Engineering, and Manufacturing. This position is responsible for executing... ...methods under the mentorship of the Manufacturing Engineer II. Essential Duties and Responsibilities include the...Work at office
- ...IE will work cross-functionally across the organization including Quality, Program Management, Logistics, Planning, Manufacturing Engineer, and Manufacturing. This position is responsible for executing change using process improvement methodologies, assisting in implementing...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Engineer II. Be the first to apply!





