Receiving Inspector & CMM Programmer
$35 - $42 per hourButler America Aerospace L.L.C.
Receiving Inspector & CMM Programmer Location: Fairfield, CA Job ID: #73221 Pay Range: $35-42 Position Summary The Receiving Inspector is responsible for performing incoming inspection of purchased parts, components, and materials to verify compliance with engineering drawings, specifications, purchase order requirements, and applicable quality standards. This position supports Client Aerospace manufacturing and product quality operations by ensuring incoming material meets applicable requirements before being released for use. The Receiving Inspector works closely with Quality Engineering, Supplier Quality, Manufacturing, Engineering, and Supply Chain to identify and resolve incoming material and documentation issues. Key Responsibilities
- Perform receiving inspection of incoming mechanical components, piece parts, assemblies, and materials in accordance with engineering drawings, specifications, inspection plans, and purchase order requirements.
- Perform dimensional and visual inspections using appropriate inspection equipment and measurement techniques.
- Review engineering drawings, GD&T requirements, specifications, certifications, and supplier documentation to determine product acceptance.
- Use inspection equipment such as calipers, micrometers, height gauges, optical comparators, profilometers, Smart Scope/vision measurement systems, and other precision measurement tools.
- Support CMM inspection activities as qualified and required.
- Document inspection results accurately and maintain appropriate inspection and quality records.
- Identify and document nonconforming material and initiate or support the appropriate quality notification/nonconformance process.
- Work with Quality Engineering and other functions to resolve inspection discrepancies and determine appropriate material disposition paths.
- Verify supplier certifications and documentation packages for compliance with purchase order and quality requirements.
- Perform inspection activities within established turnaround-time and production-priority requirements.
- Support sampling inspection plans, including AQL and approved Skip Lot processes, as applicable.
- Maintain traceability and proper control of inspected, accepted, rejected, and quarantined material.
- Support continuous improvement activities focused on inspection efficiency, quality, and reduction of receiving inspection backlog.
- Maintain inspection equipment, work areas, and records in accordance with applicable procedures and quality-system requirements.
- Support internal and external quality audits as required.
- High school diploma or equivalent.
- 3-5 years of experience in receiving inspection, mechanical inspection, dimensional inspection, manufacturing quality, or a related inspection role.
- Ability to read and interpret engineering drawings, specifications, and inspection requirements.
- Working knowledge of precision measurement tools such as calipers, micrometers, height gauges, and optical measurement equipment.
- Basic understanding of GD&T.
- Ability to document inspection results accurately and clearly.
- Ability to work effectively with Quality, Engineering, Manufacturing, Supply Chain, and other cross-functional organizations.
- Ability to work independently, manage priorities, and maintain attention to detail in a high-volume environment.
- Experience in aerospace, defense, automotive, medical device, or another highly regulated manufacturing environment.
- Experience with AS9100 or ISO 9001 quality systems.
- Strong working knowledge of GD&T.
- Experience with CMM, Smart Scope, vision systems, optical comparators, and/or profilometers.
- Experience with SAP Quality Management (QM) or a similar ERP/quality system.
- Experience with First Article Inspection (FAI) and AS9102 requirements.
- Familiarity with AQL sampling and Skip Lot inspection methodologies.
- Experience reviewing Certificates of Conformance (CoC), material certifications, special-process certifications, and supplier quality documentation.
- Familiarity with nonconforming material control and MRB processes.
- Determine part inspection requirements from internal or customer drawings.
- Create or edit programs for the coordinate measuring machine (CMM).
- Ability to validate CMM programs
- Utilize the programs to complete dimensional inspection using the coordinate measuring machine (CMM).
- Understand and utilize GD&T (geometric dimensioning and tolerancing) to complete detailed part inspection.
- Log and maintain inspection data as needed for evaluating and reporting.
- Maintain calibration system and conduct calibrations as needed.
- Train team members on the operation and programming of CMM (Coordinate Measuring Machines) and provide ongoing assistance to resolve any issues encountered during CMM operation.
- Cross train on overlapping job functions.
- Conduct finished product inspections with hand gauges and measurement systems.
- Other duties as assigned by supervisor.
- High School degree.
- Strong ability to develop inspection programs, using CMM Manager software or equivalent.
- Strong proficiency reading and interpreting engineering drawings.
- Strong proficiency interpreting GD&T standards.
- 4-8 years of CMM inspection experience.
- Able to lift up to 35 pounds.
- Ability to pass vision and color perception examination.
- Prior Aerospace industry or similar regulated industry experience.
- Experience with SAP.
- 2-3 years minimum experience with TSPACE Plus Portable Measuring Arm programming and operation.
- Ability and flexibility to work overtime and weekends as needed.
$40 - $50 per hour
...Job Description Job Description CMM Programmer/Operator (Second Shift) A CMM Programmer and Operator develops, runs, and troubleshoots Coordinate Measuring Machine programs using CMM Manager software or equivalent to inspect tight-tolerance aerospace parts....SuggestedAfternoon shift$30 - $50 per hour
Quality Technician - CMM Operator Location: Fairfield, CA Work Schedule: Full-time, onsite, second shift from 2:00 p.m. to 10:30 p.m. Permanent direct-hire position requiring the ability to work independently with minimal supervision. Compensation: $30.00-$50.00 per hour...SuggestedHourly payPermanent employmentFull timeAfternoon shift$26 - $31 per hour
...Full-time Description Job Title: Quality Inspector Location: Fairfield, CA Job Type: Full... ...Utilizes advanced measuring equipment including CMM and 3D Scanner. Performs inspection and sampling of received materials, in-process, and finished product to...SuggestedFull timeTemporary workWork at officeMonday to FridayDay shift- ...Transportation Security Inspector – Aviation Opportunities in Fairfield Transportation Security Inspectors help ensure that airports... ...operating periods. Federal Benefits Eligible employees may receive a federal benefits package that includes health, dental, vision...SuggestedFull timeWork at officeLocal areaFlexible hoursNight shift
- Quantitative Developer Location: New York City or Connecticut (Hybrid) Compensation: Competitive base salary plus performance bonus Industry: Investment Management / Financial Services Position Overview A sophisticated investment organization is seeking...SuggestedWork at office
- Quantitative Front Office Engineer — Greenwich, CT Join a global investment firm built at the intersection of financial theory and quantitative research. We apply systematic, research-driven approaches to deliver scalable investment strategies for institutional clients...Work at office
- JLL empowers you to shape a brighter way . Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them...Daily paidFull timeApprenticeship
$22 - $23 per hour
....00 - $23.00 per hour Role Description: The End of Line Inspector (EOL) is responsible for conducting detailed inspections of fabricated... ...raw materials per established inspection plans and maintain receiving inspection records. Perform start-up and changeover audits...Hourly payFull timeContract workTemporary workWork at officeLocal area$54.6k
Job Title: Job Developer (Bridgeport, CT) Department: Operations Reports To: Program Director Classification: Non-Exempt Salary Grade : $47,250-$54,600 Job Summary: We are seeking a Job Developer to develop and nurture strong relationships with employers in the healthcare...Work experience placementLocal areaFlexible hours- ...promotions, training, work assignments, transfers and other personnel actions. City: Fairfield State: Texas Job Summary: The Plumbing Inspector conducts trade‑specific inspections of plumbing systems on data‑center projects throughout the Amarillo region and surrounding...Full timeFor contractorsWork at officeShift workNight shift
$141.07k - $183.39k
Senior Web Applications Developer To design, develop, and test client server and web applications at PHC. To work with the Director of Web Applications Development in the design, development, testing, and deployment of web and desktop applications. Works closely with...- Join Schneider Electric as a Manufacturing Process Quality Operator and help us deliver products that meet the highest standards of safety and quality. This hands-on role is perfect for someone who values precision, teamwork, and making a tangible impact on customer satisfaction...Hourly payFull timeImmediate start
- Amazon Inc. is seeking a Risk Specialist I within the Worldwide Environmental Assurance and Protection team to drive regulated waste compliance across multiple California sites. You will execute environmental compliance plans, maintain waste records, and partner with site...Worldwide
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Receiving Inspector & CMM Programmer. Be the first to apply!



