Used Equipment & Inventory Coordinator

Used Equipment & Inventory Coordinator Classification Full-Time, Non-Exempt (Hourly) — Physical, Warehouse/Shop Floor Role Work Environment Industrial shop floor, receiving area, and warehouse; exposure to shop equipment, machine fluids, and dust Position Summary The Used Equipment & Inventory Coordinator is responsible for the full lifecycle of incoming used Rad Source Xray Equipment and Components — from intake and inspection through a sell ability determination, and if warranted, hands‑on dismantling, component testing, and restocking into parts inventory. This is a physically active, hands‑on role that combines mechanical aptitude, inventory discipline, coordination of internal customer requirements, scheduling of internal resources, along with sound judgment about the resale or salvage value of Rad Source Xray Equipment and its components. Key Responsibilities Receiving & Assessment Coordinate incoming used machines; verify shipment against Sales Orders, RMAs, bills of lading, and equipment manifests. Relocation of equipment and components to designated area via hand cart, pallet jacks, forklift, and/or rigging equipment Inspect each machine's mechanical, electrical, and structural condition, including key components and wiring, Operate or test‑run machinery where safe to do so in order to evaluate functionality, and document findings with photos, notes, and condition ratings. Determine sell ability by weighing age, condition, market demand, and repair cost against resale value, and recommend whether a unit should be resold intact, refurbished, or pared out. Escalate borderline or high‑value assessments to the Operations Manager or a certified equipment appraiser for a formal valuation. Dismantling & Component Recovery Safely dismantle equipment identified for parting out, using hand tools, power tools, hoists, and rigging equipment in accordance with lockout/tagout (LOTO) procedures. Drain and properly contain fluids, and lubricants prior to disassembly, and route hazardous materials for compliant disposal or recycling. Remove, tag, and stage recoverable components for testing. Break down remaining frames and non‑recoverable structures for scrap, sorting ferrous and non‑ferrous metal for maximum scrap value. Component Testing & Quality Control Bench‑test recovered components for functionality (continuity, pressure, rotation, calibration, etc.) using appropriate test equipment and gauges. Grade tested components as sellable, needs‑repair, or scrap, and record test results and condition notes for each part. Clean, package, and label components appropriately to protect against corrosion, damage, or loss of small hardware during storage. Inventory Management & Restocking Process incoming machines, dismantled components, and scrap material into the ERP system with accurate descriptions, condition grades, and bin/shelf locations. Return for restocking tested components into parts inventory in an organized, and update quantities. Monitor physical inventory counts and reconcile demand levels with salvage decisions. Maintain accurate records of in‑process machines and parts for inventory planning. Safety & Facility Support Follow all safety protocols for rigging, lifting, machine dismantling, and hazardous material handling, including proper PPE use at all times. Keep the receiving area, dismantling area, and parts warehouse organized, clean, and free of hazards. Report equipment damage, safety concerns, or environmental issues to management promptly. Physical Demands This role is physically demanding and performed primarily on an industrial shop floor and warehouse environment. Requirements include: Regularly lifting and carrying components and tools weighing up to 50 lbs., and safely using hoists, forklifts, or rigging equipment for heavier machine sections. Frequent bending, kneeling, crouching, and reaching to access, inspect, and dismantle machinery of varying sizes and configurations. Standing and walking for extended periods on concrete or metal shop flooring. Working with hand and power tools, hoists, dollies, and rigging equipment in a shop and yard setting. Exposure to machine oils, coolant, grease, dust, noise, and varying indoor/outdoor temperatures. Wearing required personal protective equipment (PPE), including steel‑toed boots, safety glasses, gloves, and hearing protection, at all times on the shop floor. Qualifications Required High school diploma or equivalent. 5+ years of experience in industrial equipment, machine shop, maintenance, or salvage/dismantling work, or equivalent mechanical background. 2 years’ experience in industrial equipment wiring, PLCs, networks and electronics. Working knowledge of hand tools, power tools, and basic rigging or hoisting equipment. Ability to read and interpret schematics, parts diagrams, or equipment manuals. Strong computer literacy for inventory system data entry, along with MSWord, Excel, Outlook, Ability to meet the physical demands described above, including regular lifting, bending, and standing. Adaptability to a changing production demand while maintaining focus on customer satisfaction. Ability to work alone or in small teams while maintaining schedule and quality Preferred Experience with High Voltage Power Supplies, and Xray equipment or other industrial machine tools. Forklift and/or overhead crane certification. Familiarity with inventory or ERP software (e.g., barcode/scanner-based systems). Knowledge of electrical, fluids, or pneumatic systems testing. Benefits: Monthly Benefit Allowance awarded to all employees. Comprehensive Benefits Package 401(k) Match – 100% up to 5% / fully vested immediately PTO and Holiday Pay Opportunities for growth Monday - Friday Rad Source Technologies, Inc. is an equal opportunity employer where employment is based upon personal capabilities and qualifications without discrimination because of race, color, religion, gender, age, national origin, disability, veteran status, or any other protected characteristic as established by law. Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and may be amended at any time at the sole discretion of the Employer. Company Description Rad Source was founded in 1997 for the purpose of creating non-gamma irradiation alternatives. Even prior to the more recent security issues associated with radioactive gamma sources, the company’s vision was to solve environmental disposal and related practical issues associated with “hot” source equipment. Based on that, we introduced our first products in 1999 incorporating x-ray technology including the first FDA cleared x-ray blood irradiator as well as our laboratory research x-ray irradiator, the RS 2000. Since then, we’ve continued expanding our capabilities and adding to our proprietary x-ray based irradiation technology, developing proprietary x-ray sources and new equipment. We are a global enterprise and our equipment resides in major pharmaceutical labs, healthcare institutions and renowned universities around the world. We are based in Buford, Georgia, USA where our highly qualified and dedicated staff continues to develop our technology, design and produce our equipment. Company Description Rad Source was founded in 1997 for the purpose of creating non-gamma irradiation alternatives. Even prior to the more recent security issues associated with radioactive gamma sources, the company’s vision was to solve environmental disposal and related practical issues associated with “hot” source equipment.Based on that, we introduced our first products in 1999 incorporating x-ray technology including the first FDA cleared x-ray blood irradiator as well as our laboratory research x-ray irradiator, the RS 2000.Since then, we’ve continued expanding our capabilities and adding to our proprietary x-ray based irradiation technology, developing proprietary x-ray sources and new equipment. We are a global enterprise and our equipment resides in major pharmaceutical labs, healthcare institutions and renowned universities around the world. We are based in Buford, Georgia, USA where our highly qualified and dedicated staff continues to develop our technology, design and produce our equipment. #J-18808-Ljbffr Rad Source Technologies, Inc.