HVAC Mechanic, After Hours - FT. SILL, OK

PCSI is looking for an HVAC Mechanic, After Hours at FT. SILL, OK. An HVAC Mechanic, After Hours performs maintenance and repair to hydronic and refrigeration systems to include air handling units, DX coil / condensing units, fan coil units, and variable air volume (VAV) units. Maintain, repair, or replace domestic and heating hot water boilers 1,000,000 BTU and below.

This position will report to the HVAC Supervisor and is based at FT. Sill, OK. Typical work hours are Swing Shift Hours: Monday thru Tuesday – 3:30pm to 12:00pm; Wednesday thru Thursday – Days off; Friday thru Sunday – 7:30am to 4:00pm.

PCSI is an Ability One employer - as such, individuals and veterans with disabilities may be prioritized based on role. Documentation may be required.

Benefits Include:

• Base pay of $24.71 depending upon experience.
• Vacation available after one year of service.
• 11 federal holidays
• Up to 56 hours of sick leave per year.

Who We Are:

PCSI is a non-profit organization whose mission is to enhance the lives of people with disabilities through employment, advocacy, partnerships, and innovation. We vet, prepare, lead, and sustain a skilled workforce that provides top-tier services at job sites across the country. Our areas of expertise are wide and diverse; total facilities maintenance, hospital environmental services, custodial and grounds, disability awareness training, job coaching, and job placement are just a few. We integrate people with disabilities and veterans into meaningful jobs with competitive wages and benefits. Serving people of all abilities in their life’s journey is at the heart of what we do.

What You'll Do as HVAC Mechanic, After Hours:

• Perform maintenance and repair to hydronic and refrigeration systems to include air handling units, DX coil/condensing units, fan coil units, and variable air volume (VAV) units.
• Maintain, repair, or replace domestic and heating hot water boilers 1,000,000 BTU and below.
• Maintain, repair, or replace commercial/residential HVAC systems under 25 tons.
• Follow mechanical code for installing and replacing HVAC systems.
• Mounts compressor and condenser units on platform or floor using hand tools, following blueprints or engineering specifications.
• Fabricates, assembles, and installs ductwork and chassis parts, using portable metalworking tools and welding equipment.
• Installs evaporator unit in chassis or in air-duct system, using hand tools.
• Cuts and bends tubing to correct length and shape, using cutting/bending equipment/tools.
• Cuts and threads pipe, using machine-threading or hand-threading equipment.
• Joins tubing or pipes to various refrigerating units by means of sleeves, couplings or unions, and solder joints, using torch, forming complete circuit for refrigerant.
• Connects motors, compressors, temperature controls, humidity controls, and circulating ventilation fans to control panels and connects control panels to power source.
• Injects small amount of refrigerant into compressor to test systems and adds freon gas to build up prescribed operating pressure.
• Observes pressure and vacuum gauges and adjusts controls to ensure proper operation.
• Tests joints and connections for gas leaks, using gauges or soap and water solution.
• Replaces defective breaker controls, thermostats, switches, fuses, and electrical wiring to repair installed units, using electrician’s hand tools and test equipment.

Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

What You'll Need to Be Successful:

• Must have at least five years’ experience and / or formal / vocational training.
• Must possess EPA Universal Certification.
• Mechanical Journeyman License preferred. Ability to obtain within three years recommended.
• Must be able to effectively read, write, and speak the English language.

Knowledge, Skills, and Abilities:

• Regularly required to stand, walk, and climb ladders. Frequently required to kneel, squat, bend, and reach.
• Required to be able to lift 50 lbs. up to 10 times per day.
• Ability to cut, modify, thread, repair, and install steel or copper piping for natural gas or water piping using threading machines, map gas, or pro press.
• Requires ability to use hand tools, power tools, and equipment required for installation, maintenance, and repair.
• Ability to work as a team member.
• Self-starter, able to work with minimal direction and supervision.

Other Requirements:

• Ability to pass criminal, drug, and driving screening.
• Ability to work any time or day of the week, including weekends and holidays.
• Possess valid driver’s license and maintain good driving record.
• If required, ability to obtain and maintain security clearance and base access to assigned site(s).
• Swing Shift Hours:
• Monday thru Tuesday – 3:30pm to 12:00pm
• Wednesday thru Thursday – Days off
• Friday thru Sunday – 7:30am to 4:00pm

PCSI does not offer immigration sponsorship for this position. This includes visa types such as H-1B, TN, and STEM OPT. Please do not apply if you currently require or may require sponsorship now or in the future.

All veterans and/or persons with all types of disabilities are strongly encouraged to apply!