Assembler
Align Percision
Position Summary: Performs basic and intricate electronic/electro-mechanical assembly functions on prototype and production type hardware according to company workmanship standards and military or client specifications . Assists in the development and wiring of engineering models and in the development of assembly methods and wire lists . Uses hand or power tools to trim, shim, cut, and make other adjustments to fit components together and align them properly. May assist in instructing and training lower-level assemblers . Reads and interprets wiring lists and assembly drawings to work orders using work instructions . May perform any rework from test failures in accordance with standard repair procedures and may set up and operate automated assembly equipment. At the most senior level may serve as a team leader providing training to new staff and evaluating the performance and finished work of assigned staff.
Essential Duties and Responsibilities include , but are not limited to :
Determine Detail/Hardware locations per blueprints and mylars
Set-up and operate Drill Press, Pneumatic drills, "C" squeezes, Hand Squeezes, Rivet Pullers.
Set up countersinks per fastener requirements and shop router
Monitor and work with very tight tolerances
Drill holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies per blueprint and customer specifications.
Install units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
Bolt, screw, or rivet accessories to fasten, support, or hang components and subassemblies.
Locate and mark reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
Position and align subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Complete all required training and any additional training required by supervisor.
Complete quality documentation
Perform preventative maintenance on assembly presses and tooling
Verify part and hardware count to shop router
Other duties as assigned
Qualifications:
Experience and Education:
1-2 years of relevant experience
High school degree or equivalent
Technical Skills:
Excellent attention to detail
Strong hand-eye coordination
Ability to read, understand and interpret engineering drawings and specifications (e.g., blueprint reading, specification, change, design).
Working knowledge of aircraft manufacturing, instructions and blueprints
Working knowledge of customer specifications and requirements
Ability to use calipers, micrometers, etc.
Mastery of basic math (addition, subtraction, multiplication, division, and fractions)
Strong teamwork and communication skills to get along with co-workers and be a team player
Understand and obey safety requirements
Commitment to keep work area clean and free of debris
Physical Requirements:
Must be able to lift and/or move up to 50lbs
Specific vision abilities include close and distance vision, depth perception and ability to adjust focus
Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time
Capable of standing for long periods
Supervisory Responsibilities : None.
Travel Required : N/A
Note : This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position . Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments . All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities.
To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently . Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others . The requirements listed in this document are the minimum levels of knowledge, skills, or abilities . This document does not create an employment contract, implied or otherwise, other than an at will relationship .
Affirmative Action/ E mployment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company . We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.
- ...The Electro-mechanical Assembler will assemble components and products according to specifications, blueprints, and schematics. This includes using hand tools, power tools, and machinery to ensure accurate assembly. ESSENTIAL DUTIES AND RESPONSIBILITIES: Interpret...SuggestedHourly payLocal area
- ...Mechanical AssemblerAs a Mechanical Assembler you can expect to be our go-to for driving continuous improvement in the operations and assembly process. Will provide on the job training (OJT). All work is performed in explosive handling areas.Responsibilities:Work under...SuggestedContract workFor contractorsFor subcontractorShift work
- ...needs of low to medium production volume recoil kits for firearms. The production designs are complex electronic and mechanical assemblies that incorporate state of the art, electronically controlled firearm components to allow advanced simulator training in a safe environment...SuggestedFull timeMonday to FridayWeekend work
$19 - $23 per hour
...Job Title: Electrical Control Panel Assembler Job Description Join our team as an Electrical Control Panel Assembler where you will be actively involved in assembling electrical control panels, wiring harnesses, and related components used in industrial automation...SuggestedWeekly payContract workTemporary work- ...Harness Technician 1 High School Diploma or GED plus a minimum of 5 additional years of education and/or relevant experience in assembly, electronics, manufacturing, production or logistics. A minimum of 5 years of experience in electrical assembly and wiring....SuggestedWork at office
- ...Harness Technician 1 High School Diploma or GED plus a minimum of 2 additional years of education and/or relevant experience in assembly, electronics, manufacturing, production or logistics. A minimum of 1 years of experience in electrical assembly and wiring....Work at office
- ...environment. Experience: Previous employment in related field preferred. General Responsibilities Responsible for reading work orders and assembling truck in time allotted by co ordinating work within the department, as well as with other departments; reporting pertinent...Hourly payWork at officeImmediate start
$30 - $50 per hour
...Personal and Immediate Family Vehicles ~ Opportunity for Advancement!!! Essential Roles and Responsibilities: Disassembly and assembly of automatic transmissions Transmission tear down and diagnosis Parts pricing and ordering Transmission troubleshooting...Bi-weekly payLocal areaImmediate startMonday to Friday- ...Randstad - [Production Operator / Assembly Line Worker] As an Assembler at Randstad, you'll: Perform the assembly, loading and unloading of parts; Assemble components and parts according to specifications and blueprints; Operate hand tools and machinery to fit, connect...Immediate start
- ...Job Description Job Description Description: POSITION SUMMARY Performs advanced precision assembly of complex aerospace and defense components, custom products, cable assemblies,connectors, and electromechanical assemblies. Works from engineering drawings, specifications...Permanent employmentTemporary work
$19 - $23 per hour
...Production AssemblerAZ - Chandler | QualastatA leading Aerospace and Defense assembly manufacturer in Chandler Arizona is seeking experienced Solder/ Wire Harness Assembly Technicians. The perfect candidate for this position will be reliable, have a good work ethic, be...Full time$27 - $34 per hour
...Job DescriptionJoin our Chandler Fab Shop team as a Plastic Pipe Cleanroom Welder/Assembler, where you will fabricate and weld high-purity thermoplastic piping systems used in controlled cleanroom environments. In this role, you will apply specialized fusion welding techniques...Hourly payMinimum wageFull timeTemporary workLocal areaVisa sponsorship- ...efficiently.Make Sparks Fly! Perform manual welding and fabrication when needed.Build It Right! Fabricate steel components and complete assemblies using CAD prints and specifications.Finish Strong! Grind, finish, and inspect products to ensure they meet our quality standards....Hourly payWeekly payMonday to FridayWeekend work
- ...Aerotek - JobID: JP-005854747 [Production Operator / Assembly Line Worker] As a Mechanical Assembly Worker at Aerotek, you'll: Perform mechanical assembly on different electronic products; Read and interpret blueprints, and quality-check the final products; Perform other...Immediate start
$19 - $21 per hour
...Job Title: Mechanical Assembler Job Description This role focuses on repairing, assembling, and troubleshooting aircraft captain chairs and seating components in a specialized repair section. You will work in a back-shop environment, using mechanical and basic electrical...Weekly payPermanent employmentContract workTemporary workMonday to FridayDay shift- White Cap Job OpportunityA position at White Cap isn't your ordinary job. You'll work in an exciting and diverse environment, meet interesting people, and have a variety of career opportunities.The White Cap family is committed to Building Trust on Every Job. We do this...Night shift
- ...Mechanical Assembler (3rd Shift) Nammo Defense Systems Inc., a defense contractor, manufactures and supports shoulder-fired systems; energetic material solutions such as aircraft emergency escape systems, actuation devices, rocket motors, warheads, medium & large caliber...For contractorsLocal areaFlexible hoursNight shiftDay shift
$20k
...County. OSW and has been in business for over 20 years and has branches in Edmonton, Canada and Tempe, Arizona. As a Mechanical Assembler II on our growing team, you are contributing to the success of the company by safely and efficiently troubleshooting and...Bi-weekly payHourly payFull timeImmediate startWorldwideFlexible hours$20 - $26 per hour
...Job Description Job Description Job Title: Manufacturing Assembler Department: Production Reports To: Senior Project Lead Location: Chandler, AZ Pay Range: $20-$26 Position Summary: C.E. Precision Assemblies, a Trexon Company, is hiring for a...- Our client is seeking a Fab Operator to join the team. As a Fab Operator, you will play a crucial role in the manufacturing of electronic components to given schedule using a range of equipment and processes with a cleanroom environment. Responsibilities: Processing...Local areaShift work
- ...Electrical Assembler Minit Charger builds EV charging equipment in Chandler. We are looking for a careful, reliable Assembly Technician to build our products from start to finish. You will work from drawings and work instructions, wire and test assemblies, and help...
- ...Summary: As a Shop Fabricator at Kovach, you will play a crucial role in our custom metal fabrication and assembly processes for various commercial construction projects. This position, based in Chandler, Arizona, involves cutting, shearing, bending, drilling, punching...Full timeFor contractorsImmediate startFlexible hours
- A position at White Cap isn’t your ordinary job. You’ll work in an exciting and diverse environment, meet interesting people, and have a variety of career opportunities. The White Cap family is committed to Building Trust on Every Job. We do this by being deeply knowledgeable...For contractorsNight shift
$20 - $24 per hour
...Now hiring for an Electronic Assembly Technician Location: Chandler, AZ Pay Rate: $20.00 - $24.00 per hour Schedule: 1st Shift | Monday-Friday, 6:00 AM-2:30 PM Local Electronic Assembly Technician Job with Pay, Perks, and a Great Team. Looking for Electronic...Hourly payWeekly payLocal areaImmediate startMonday to FridayDay shift- ...critical cable and harness products for top-tier industries. This onsite position offers hands-on experience with advanced electrical assembly and wiring, providing an excellent foundation for career growth in electronics manufacturing. Work in a collaborative, quality-...Work at officeFlexible hoursWeekend workDay shiftAfternoon shift3 days per week
- ...Job Description Job Description Job Description: Our team in Space and Defense Group is looking for an Electrical Assembler to join them. You will report to the Manufacturing Supervisor and will have an onsite work schedule in Gilbert, AZ. Responsibilities...Temporary work
- ...Responsibilities: Perform soldering in accordance with IPC-J-STD on printed circuit boards, printed wire boards, and circuit card assemblies both through hole and surface mount applications. Assemble chassis and final units using circuit cards, wire harnesses,...Temporary work
- Sailors in the Navy’s Construction Battalion are makers. They’re driven to work with their hands, and they know the value of doing a job right the first time. They’re tougher than any task and they’re not afraid to get a little dirty. If this sounds like you, then you ...Part timeOverseas
$28 - $31 per hour
...Electrical Assembly Technician$28 – $31/hour (DOE)ContractFull-time, Day Shift (6am-3:30pm) - 9/80 schedule (off every other Friday)Gilbert, AZ 85233 (100% Onsite)Tekberry is seeking experienced Electrical Assembly Technicians to support our client, a worldwide designer...WorldwideDay shift- Chandler Unified School District Job DescriptionClassification: Support StaffJob Title: Cabling TechnicianReports To: Director of Support ServicesCalendar: 2612H (12 Month)Salary: Grade 118Job Goal:Cabling Technician installs all low voltage electrical infrastructures,...For contractorsFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Assembler. Be the first to apply!
- assembly laborer Chandler, AZ
- assembler full time Chandler, AZ
- avionics assembler Chandler, AZ
- assembler Chandler, AZ
- production assembler Chandler, AZ
- skilled assembler Chandler, AZ
- precision assembler Chandler, AZ
- manufacturing assembler Chandler, AZ
- assembly mechanic Chandler, AZ
- assembly workers Chandler, AZ




