HELICOPTER FLIGHT MAINTENANCE TEST PILOT (MTP) (Title 32)

Helicopter Flight Maintenance Test Pilot (MTP) (Title 32)

As a Helicopter Flight Maintenance Test Pilot (MTP) (Title 32) with the Texas Army National Guard, your duties will include, but will not be limited to:

• Performs preflight weather analysis, route and altitude selections, alternate airport selection, fuel, cargo and passenger load computations, selection of refueling stops, preflight inspections, flight plan filing, and firing ranges route planning/coordination. Incorporates precision, non-precision, and GPS route navigation and instrument approaches in all mission planning and must be knowledgeable in all aspects of their operations. Maintains and studies current and complete files of aeronautical publications, navigation charts, instrument approach procedures, and air traffic control procedures.
• Serves as rotary wing Instructor Pilot (IP): Trains and evaluates aviators on basic and advanced flight techniques. This includes the procedures to use in emergencies and malfunctions over rough terrain, Serves as pilot-in-command while operating single and/or multi-engine rotary wing aircraft to perform airlift support for DOD personnel, emergency medical evacuations, aerial fire suppression support, paradrops, rescue, and Defense Support of Civil Authorities (DSCA) operations. May be required to transport classified, chemical, or other hazardous cargo. May be required to perform extended flights to and from a wide variety of points, with responsibility for safely transporting passengers and/or classified, chemical, or other hazardous cargo. Pilot will possess competency on all aviation matters that will encompass safety as the number one priority, demonstrate a consistent mature judgment and maintain a high degree of pilot proficiency for conducting flight missions under visual flight rules (VFR) and instrument flight rules (IFR). Flights may be performed with a combination of day, night, and night vision goggle (NVG) operations under both favorable and unfavorable environmental conditions (fog, sleet, ice, rain, snow, high winds, low ceilings) over both favorable and unfavorable terrain (mountains, water, desert, swamp, forest) which may require a transfer from IFR condition to marginal VFR condition for landing at remote locations. Locations may include a combination of confined areas with unfavorable terrain and obstacles and high altitude requiring an in-depth performance planning for take-off and landings under heavy load conditions. Flights could be conducted with a combination of unfavorable weather conditions, over unfavorable terrain or water at both low altitude and slow airspeed, at maximum gross weight, which are outside the recommended flight envelops for safe flight and/or involve the use of techniques employed as to avoid detection, and often entail prolonged periods of flying. Such flights, maintenance test flights, and low-level flights are such that a safe emergency landing would be difficult and would require a very high degree of pilot skill. Pilot will adhere to existing Army flight regulations and Federal Aviation Administration (FAA) regulations.
• Serves as rotary wing Instrument Flight Examiner (IE): Conducts instrument flight qualifications and training which includes, instrument flight planning, precision handling and maneuvering of the aircraft, navigation using the aircraft navigation instruments and systems, air traffic control operations, approach, departure, and holding procedures, and use of the ILS.
• Serves are Maintenance Test Pilot Examiner (ME)/Functional Check Pilot (FCP) Evaluator
• Serves as Aviation Safety Officer (ASO): Serves as an Aviation Safety Officer (ASO) carrying out a variety of duties to provide a productive aviation safety program for the Aviation Classification Repair Activity Depot (AVCRAD) or any Army Aviation Facility.
• Serves as rotary wing Maintenance Test Pilot (MTP) and/or Functional Check Pilot (FCP). Incumbent performs general or limited maintenance test flights following maintenance modifications or repairs to include routine scheduled maintenance. Flights are made to determine the airworthiness of the aircraft and to ensure all systems/components are functioning within the maneuvers and loads prescribed in applicable aircraft maintenance manuals and regulations. Ensures compliance with Army maintenance regulations, FAA regulation specifically Part 91. Performs ground maintenance operational checks, trouble shooting, rotor smoothing. Minimizes rotary wing vibration to ensure reduce time before overhaul (TBO) items and extend component life. Routinely performs flight maneuvers at the maximum limit of operator manual flight characteristics. Maintains requirements and performs function of technical inspector for aircraft assigned.
• Performs other duties as assigned.