Assembly Operator
Oil States International
Assembly Operator
GEODynamics in Millsap, TX is looking for qualified candidates for Assembly Operator. Our campus is on the frontage road of Interstate 20 near Millsap, TX. Located west of Fort Worth, it is an easy commute from surrounding communities of Weatherford, Stephenville, Mineral Wells and Aledo
Key Accountabilities:
- Perform standard assembly procedures to safely load, repair and store all guns & equipment.
- Use different tools and equipment to assemble units per required specifications.
- Looks for faulty parts during the process of assembly and ensures that products are functioning properly and are of good quality.
- Maintain adequate paperwork or computer entries for all inventory items.
- Complete inventory counts and communicate results.
- Learn to perform preventative maintenance on machines using written instructions and checklist.
- Learn to maintain tools, shop, and equipment in good condition and keep shop and work area in a clean and orderly condition.
- Practice safe work habits in accordance with OSHA and GEO-specific Health and Safety expectations.
Qualifications, Experience, Skills/Knowledge:
- High school diploma or equivalent.
- 0 – 2 years' experience.
- Entry level with some experience with oil and gas industry perforated products preferred.
- Good communication skills.
- Basic mechanical aptitude, troubleshooting ability, and ability to perform repetitive tasks.
- Should possess manual dexterity, good eyesight, good reading skills.
Physical Requirements:
- Ability to safely perform related physical demands of the role: Bending, lifting, stooping, pushing, pulling and sitting greater than 50% of the time
- Repetitive motion demands
- Hands/wrist/shoulder and gripping
- Ability to lift up-to 50 pounds as needed
Work Environment/Environmental Conditions:
- Occasional exposure to hazardous chemicals, fumes, and gases
- Ability to work in extreme temperatures.
- Walking surfaces: Outdoor areas ramps and rough/uneven terrain
An E-Verify Employer
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
- ...Assembly OperatorGEODynamics in Millsap, TX is looking for qualified candidates for Assembly Operator. Our campus is on the frontage road of Interstate 20 near Millsap, TX. Located west of Fort Worth, it is an easy commute from surrounding communities of Weatherford, Stephenville...Suggested
$16.5 per hour
...Job Description Job Description ASSEMBLY OPERATOR Monday - Friday 6:00 AM - 2:30 PM $16.50 per hour As an Assembly Operator, you will assemble, inspect, and test products while operating production equipment according to established quality, engineering,...SuggestedHourly payMonday to Friday$16 per hour
...hands and seeing a finished product come together? **LSI Staffing** is looking for detail-oriented individuals to join a dynamic assembly team! We aren't just looking for workers; we're looking for the next generation of skilled assemblers who want to build a career with...SuggestedShift workDay shift- Child Nutrition Worker Child Nutrition Worker Millsap Independent School DistrictSuggested
- ...locations according to company and manufacturer specifications. Test equipment following repairs or installations to verify proper operation and performance. Maintain accurate service records, including equipment serviced, parts used, labor hours, and work performed....SuggestedFull timeTemporary workWork at officeLocal areaWork from homeLong distanceNight shiftWeekend workAfternoon shift
- Encore Oilfield Services, LLC is seeking a skilled AMS Heavy Field Service Technician to join our team in Millsap, Texas. The role focuses on maintenance, troubleshooting, repair, installation, and commissioning of reciprocating natural gas compression equipment at customer...
$18 per hour
...Description FABRICATOR Monday - Friday 6:00 am - 5:00 pm $18.00 per hour ESSENTIAL JOB FUNCTIONS Set up and operate brake press and punching machines Perform manual layout of parts for punching Review blueprints and drawings to ensure...Hourly payMonday to Friday- ...encouraged to apply. Our Culture: Fueling customers' journeys since 1964, innovation leads the way for this family-owned and operated business headquartered in Oklahoma City. With nearly 40,000 team members, travel stops are the core business along with products...Full timeImmediate startFlexible hoursNight shift
- ...Fit-up ANSI flanges to pipe, forged flanges to shells and profile nozzles to match required shell. Lay-out nozzles and other sub assembly location in shell components Burns and grinds nozzle cutouts in shell to meet engineering tolerances Uses flame cutting...Full timeFlexible hours
$18 - $20 per hour
...orders to determine project specifications. Fabricate, fit, and assemble metal parts and structures according to production requirements... ...welds for quality, accuracy, and structural integrity. Operate welding equipment, hand tools, power tools, grinders, saws, and...Hourly payMonday to Friday- ...dimensional inspection of machined metal parts and completed assemblies to determine precise conformance to specifications, tolerances... ...available.Supports manufacturing shop engineers, managers, and operators with customer and supplier issues.Calibrates and maintains all...Temporary workFlexible hours
- ...distribution industry. We manufacture brick and distribute our own brick as well as brick and associated products manufactured by others. We operate in 13 states with a philosophy that we are much more than a brick manufacturer and distributor. Quality Control Technician We...Flexible hours
- Job Description Job Description The Engineering Technician is an active member of the GTEC team and is responsible for developing and testing technical solutions in research and development testing of manufactured products. Key Accountabilities: Assist engineers...
- None
- ...visual and dimensional inspection of components and completed assemblies to determine precise conformance to specifications, tolerances... ...available. Supports manufacturing shop engineers, managers, and operators with customer and supplier issues. Maintains all gauges and...
- ...Job Description Job Description Open Positions: Assembler, Pressroom Operator, Warehouse Loader Schedule: Varies by position Pay: Varies by position We are looking for self-motivated assembler/production workers to join our team. Our production line positions...Shift work
- ...bearing inspections, crankshaft work, and compressor overhauls. Operate machine tools to fabricate and modify precision parts.... ...maintenance Equipment testing and quality assurance Mechanical assembly and fabrication OSHA and workplace safety practices What...Temporary workLocal areaWeekend workAfternoon shift
$15.5 per hour
...School Diploma or equivalent required. Ability to lift up to 40 lbs. Willingness to work occasional weekends. Ability to operate a forklift and pallet jack (training provided if necessary). Strong attention to detail and organizational skills. Comfortable...Hourly payWork at officeMonday to Friday- ...accordance with FAA requirements. Collaborate with other technicians, engineers, and flight crews to ensure timely and efficient operations. Troubleshoot, resources, repair and replace aircraft components and systems as necessary. Participate in ongoing training...Full time
$25 - $32 per hour
...support the Engineering Lab by performing hands-on testing, assembling test setups, collecting data, and assisting engineers with product... ...Help execute basic software loading, configuration, or operational checks as part of systems testing (relevant to DO-178 workflows...Hourly payRelocation packageFlexible hoursShift work- Aramark is seeking a Laundry Specialist to operate laundry equipment and maintain linen quality at Mineral Wells, TX. The role involves sorting, folding, and delivering clean linen, while ensuring housekeeping and safety standards are met. Responsibilities include operating...
- Maintenance Technician Part Time- 20 hours a week Location: Sandstone Foothills Apartments located in Mineral Wells, TX Join a team that's making a difference in senior living! At Sandstone Foothills Apartments, we're seeking a hands-on Maintenance Technician ...Part time
$100k - $160k
Job Description Job Description Our shop is located in GARLAND TX. For faster responses, call or text Jason at (***) ***-**** . Join our Growing team in GARLAND TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience...Hourly payRelocationRelocation package- ...cabinet making, fabrication, upholstery, electrical harnesses assembly, disassembly, and parts installation. The role requires advanced... ..., tools, materials, and safety supplies to ensure efficient operations. Compliance and Safety: Ensure adherence to safety protocols and...
- ...professional for a senior-level role focused on vehicle efficiency, safety, and reliability. The role involves complex repairs, painting, assembly, and quality assurance on multiple vehicle types. Candidates should have at least 3 years of relevant experience, advanced...
- Ventamatic, Ltd. in Mineral Wells, TX, seeks a Maintenance Supervisor to oversee daily maintenance of facilities and production equipment, including HVAC, electrical and mechanical systems. You'll supervise technicians, coordinate repairs, and ensure preventative maintenance...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Assembly Operator. Be the first to apply!




