Biomed Equipment Technician II
The University of Kansas Health System
Biomed Equipment Technician II
Biomed Equipment Technician II Bell Hospital
Position Summary / Career Interest:
Under moderate supervision the Biomedical Equipment Technician II will perform repair, calibration, preventive maintenance, inspection, and installation of a diverse range of diagnostic, therapeutic, and physiological monitoring equipment and systems used in direct patient care, including high risk and life support equipment. By following policies, procedures, and standards, they will assure compliance of the equipment they are responsible for and also assume responsibility for risk and safety issues associated with the position. When necessary, the employee will participate in performance improvement activities. Utilizing resources efficiently and effectively is a primary function of the position. It is the responsibility of the employee to bring ideas/concerns to their supervisor and participate in department decision-making.
Responsibilities and Essential Job Functions
- Performs repair, calibration, preventive maintenance, inspection, and installation of a diverse range of diagnostic, therapeutic, and physiological monitoring equipment and systems used in direct patient care, including high risk and life support equipment.
- Diagnose and correct system and equipment malfunctions.
- Ability to interpret schematics, wiring diagrams, illustrated parts drawings, and flow charts of biomedical instrumentation.
- Have basic knowledge of how to identify and troubleshoot Local Area Network, (LAN) components.
- Monitor completion of preventive maintenance activities performed by outside vendors and third-party vendors.
- Schedule and oversee vendor and third-party repairs as necessary.
- Review outcome of preventive maintenance actions and make recommendations to department staff concerning improvements.
- Maintain accurate inventory, tracking both the addition and deactivation of clinical equipment.
- Maintain accurate and timely documentation on new equipment, inspections, and equipment repairs and failures.
- Understand and comply with Joint Commission and other applicable standards and regulations.
- Must have a valid drivers license in order to be able to provide service to all TUKHS Biomedical Engineering Department customers.
- Provide in-service educational programs to clinical staff as needed.
- Provide technical assistance and instruction on equipment operation to medical staff as needed.
- Must be able to perform the professional, clinical and or technical competencies of the assigned unit or department.
- These statements are intended to describe the essential functions of the job and are not intended to be an exhaustive list of all responsibilities. Skills and duties may vary dependent upon your department or unit. Other duties may be assigned as required.
Required Education and Experience
- High School Graduate
- 2 or more years biomedical experience (an equivalent combination of education and experience may be substituted)
Preferred Education and Experience
- Associates Degree Electronics/Biomedical Equipment Technology
Required Licensure and Certification
- Valid driver's license
Preferred Licensure and Certification
- Certified Biomedical Equipment Technician (CBET) - Association for the Advancement of Medical Instrumentation (AAMI)
Knowledge Requirements
- Familiarity with information technology and networks.
Important Information for You to Know as You Apply:
- The health system is an equal employment opportunity employer. Qualified applicants are considered for employment without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, ancestry, age, disability, veteran status, genetic information, or any other legally-protected status. See also Diversity, Equity & Inclusion.
- The health system provides reasonable accommodations to qualified individuals with disabilities. If you need to request reasonable accommodations for your disability as you navigate the recruitment process, please let our recruiters know by requesting an Accommodation Request form using this link View email address on click.appcast.io.
- Employment with the health system is contingent upon, among other things, agreeing to the health-system-dispute-resolution-program.pdf and signing the agreement to the DRP.
- ...Biomed Equipment Technician Apprentice Under relatively close supervision, the Biomedical Equipment Technician Apprentice will perform repair, calibration, preventive maintenance, inspection, and installation of a diverse range of diagnostic, therapeutic, and physiological...SuggestedApprenticeship
$27 per hour
Job Overview: The Maintenance Technician II will assume advanced tasks relating to the production machines and will troubleshoot when necessary. This position is responsible for analyzing equipment to troubleshoot problems and making any necessary repairs with minimal...SuggestedMonday to FridayShift work- ...UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance... ..., maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday...SuggestedWork experience placementWork at officeImmediate startMonday to FridayNight shiftWeekend work
$21.5 - $30.75 per hour
...Traveling Field Service Technician II US-KS-Kansas City Job ID: 34242 Type: Full-Time # of Openings: 1 Category: Field... ...seeking an individual to: Work with cutting-edge Canon equipment and technologies. Build strong relationships with customers...SuggestedHourly payFull timeFor contractorsFor subcontractorCasual workWork at officeLocal areaShift workNight shift- ...Maintenance Technician II The Maintenance Technician II is a mid-level technician responsible for troubleshooting, repairing, and maintaining automated systems, conveyors, and facility equipment. This role serves as a primary responder to equipment issues and supports...SuggestedShift workNight shift
- UniFirst is seeking a Maintenance Technician II to support our manufacturing and facility operations in Wilmington, MA. In this hands-on... ...maintenance on production machinery, building systems, and support equipment to keep operations running safely and efficiently. You will...
- ...position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's... ..., facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing... ...graduate (or GED) or possess a vocational technician certification beyond high school, with two...Hourly pay
- ...children and passengers.As a Fleet Tech II supporting a school bus fleet, you'll diagnose... ...leave on time. You'll work with the Lead Technician or Maintenance Supervisor to identify and... ...Notify leadership of unsafe conditions, equipment misuse, or vehicle abuse immediately. •...Local areaImmediate start
$32 per hour
...manufacturing and industrial services, is seeking a Maintenance Mechanic II to join their team. As a Maintenance Mechanic II, you will be... ...the Job? Perform technical and maintenance support to ensure equipment uptime and availability Conduct safety inspections and...Hourly payPermanent employmentTemporary workFlexible hoursShift workWeekend workDay shift$75 per week
...Maintenance Technician IIJoin our team at Reserve at Barry apartments, in Kansas City, MO as a Maintenance Technician II and take the lead on repairs, preventative maintenance, and building operations for our apartment community. This mid-level role is ideal for those...$26.5 per hour
...Maintenance II Technician The Maintenance II Technician is responsible for performing facility and equipment maintenance, repairs, and preventive maintenance tasks at the site level. This is a mid-level maintenance position that works under the guidance of the Maintenance...Hourly payWeekly payDaily paidTemporary workLocal areaFlexible hoursAfternoon shift$21 per hour
...less complex facilities, systems, and/or equipment. Incumbents are eligible for on-the-job training... ...with all of Building Maintenance Technician I position responsibilities as observed by... ...all of Building Maintenance Technician I & II position responsibilities. May provide...Hourly payFull timePart timeFor contractorsSeasonal workImmediate startFlexible hoursShift workNight shiftAfternoon shift- ...maintenance duties including rough carpentry, painting and basic equipment or facility repairs, training, and preparation for state, and... ...well as general maintenance training for Maintenance Tech I and II's.Prepares properties for REAC or INSPIRE inspections.Required Qualifications...Full timeLocal area
- Job Title Maintenance Mechanic I, II, III Job Function Rebuild/Production Reports To Facility Equipment Maintenance Supervisor Classification Non-Exempt Date Approved/Revised May 8, 2026 Summary With minimum supervision the Maintenance Mechanic I, provides technical...Immediate startShift work
$24 - $26 per hour
...Maintenance Technician II Carpentry, electrical, HVAC, plumbing, and you! These are some of the most important things we need to maintain... ...Expense Reimbursement program (including gym memberships, equipment, and subscriptions) ~ Tuition Reimbursement program and...Hourly payFull timeTemporary workWork experience placementWork at officeMonday to FridayFlexible hoursWeekend work- About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent...Hourly payFor contractorsFor subcontractorCasual workWork at officeLocal area
- AGS - American Gaming Systems is hiring a Field Service Technician in Kansas City, KS. This role involves troubleshooting, installing, and maintaining gaming equipment while ensuring top-notch customer service. Ideal candidates will possess a high school diploma or GED,...
$18 per hour
Agiliti in Kansas City, KS is seeking a Rigid Surgical Equipment Technician I to repair surgical equipment in the Modality, with entry level pay of $18/hour. Daytime hours, opportunities to impact patient care. You will inspect, test, disassemble/assemble equipment, document...Flexible hours- ...Industrial Maintenance Technician II The Industrial Maintenance Technician II is responsible for maintaining, troubleshooting, repairing, and improving manufacturing equipment used in paper converting operations. This position supports production goals by minimizing...Work at officeNight shiftWeekend work
- Hakc is seeking an Apartment Maintenance Mechanic II in Kansas City, MO. Candidates will perform skilled maintenance on buildings, grounds, and equipment, including carpentry, plumbing, electrical, and HVAC repairs. The role requires at least two years of experience or...
- M.E.S.O. Inc. is seeking experienced Equipment Mechanics/Service Technicians in Kansas City, KS. Responsibilities include advanced maintenance and repairs on equipment across various systems, delivering exceptional customer service. Ideal candidates will have at least 5...
- ...Field Technician II Electric Power Systems (EPS) is a NETA-accredited independent electrical testing and engineering organization specializing... ..., test, and maintain High, Medium, and Low electrical power equipment. Technicians will work with electrical equipment, such as SF6...
- ...engineers, scientists, geologists, inspectors, technicians, and drillers united by a shared purpose... ...? UES is seeking a Field Technician II to support construction materials... ...project specifications Operate testing equipment and maintain accurate project...For contractorsWork at officeLocal areaNight shiftEarly shift
$80k - $90k
...and electrical systems. Responsibilities include instructing railroad personnel, troubleshooting, and repairing track maintenance equipment. Candidates must have a valid driver's license, be able to travel extensively, and pass a physical exam. Compensation ranges from...$18 per hour
Agiliti Health, Inc is seeking a Surgical Equipment Technician (Entry-level) in Kansas City. The role involves repairing surgical equipment, ensuring it is operational for patient care. Responsibilities include testing, documenting services, and maintaining work standards...Monday to FridayFlexible hours$18 per hour
...change a life. We are a nationwide company of passionate medical equipment management experts who proudly serve hospitals and healthcare... ...your career with Team Agiliti! The Rigid Surgical Equipment Technician I uses technical and mechanical skills to repair surgical...Daily paidFull timeTemporary workLocal areaFlexible hours- ...Maintenance Technician IIIKansas City, KSAt PBI-Gordon Companies, and our subsidiaries PBI-Gordon... ...systems.Installation of facility equipment from provided P&ID and blueprints to include... ...trainer for Maintenance Technicians I and II, providing hands-on instruction during repairs...Permanent employmentApprenticeship
$32 per hour
...running at full strength. This is a hands-on role for someone who knows their way around hydraulics, electrical systems, and heavy equipment — and takes pride in solving problems before they become downtime.The DetailsPay: Starting at $32/hour, flexible based on...Local areaImmediate startMonday to FridayFlexible hoursShift work$22 - $24 per hour
...keeping things running smoothly? We're seeking a Maintenance Technician to join our dynamic team and help maintain our properties at peak... ...and courteous manner consistent with company operating and equipment/supply standards.Diagnose and perform installation, preventative...- ...grounds.Complete repairs and preventative maintenance on a variety of systems such as plumbing, electrical, refrigeration, kitchen equipment and HVACPerform light carpentry, painting, vinyl and drywall repairImplement and monitor programs to ensure a safe facility and...Live inImmediate startFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Biomed Equipment Technician II. Be the first to apply!
- equipment installer Kansas City, KS
- bank equipment technician Kansas City, KS
- commercial food equipment service technician Kansas City, KS
- restaurant equipment technician Kansas City, KS
- equipment mechanic Kansas City, KS
- fitness equipment technician Kansas City, KS
- equipment technician Kansas City, KS
- medical equipment Kansas City, KS
- dental equipment Kansas City, KS
- respiratory equipment Kansas City, KS





