AIRCRAFT MECHANIC (Title 32) Jobs
ClearanceJobs
Job TitleTHIS IS A TITLE 32 DUAL STATUS POSITION DUTY LOCATION: Army Aviation Support Facility (AASF), Windsor Locks, CTJob DescriptionJOB SUMMARY: The purpose of this position is to perform the full range of aircraft maintenance duties including troubleshooting, preventive maintenance, repair and ground testing of assemblies, systems and surfaces for one or more types of military aircraft, fixed and rotary wing. NATIONAL GUARD MEMBERSHIP IS REQUIRED. This is an excepted position that requires membership in a compatible military assignment in the Connecticut Army National Guard. The major duties include, but are not limited to:Performs inspections, functional checks and preventive maintenance to include phase inspections, daily inspections, pre and post flight inspections and such special inspections. as required, including fuel and contamination checks, oil sampling, and inspection of on board emergency equipment.Troubleshoots, diagnoses and performs unscheduled maintenance on assigned and transient aircraft.Conducts checks on hydraulic, electrical, transmission, power systems, etc.Removes components and assemblies, repairs or replaces defective parts and components and reassembles repaired items into the aircraft.Installs, aligns and makes needed adjustments to major components and assemblies such as engines, propeller/rotors, transmissions, hydraulic systems, etc., assisting specialists as required.WORKING CONDITIONS: Works inside and outside, in inclement weather, on icy, wet and slippery ramps and work-stands in temperature and humidity extremes. Work areas may be drafty, noisy and have toxic fumes present. Irritants such as aircraft fluids, dirt, grease, dust, paint and solvents may be present. Exposure to cuts, burns, electrical shock, strains and broken bones exists. PHYSICAL EFFORT: Required to climb, stand, stoop, bend, stretch and work in tiring and uncomfortable positions. Frequently lifts parts and equipment weighing up to 20 pounds. Occasionally lifts and carries items weighing 50 pounds and over.REQUIREMENTS Conditions of employmentIncumbent is required to serve a 2-year trial/probationary period.National Guard Membership is required.Males born after 31 December 1959 must be registered for Selective Service.Federal employment suitability as determined by a background investigation.Must meet Compatible Military Assignment within one year from placement.Wear of the military uniform is mandatory.Direct Deposit is mandatory.Must be able to obtain and maintain a secret security clearance.Must possess a valid state drivers license.Qualifications GENERAL EXPERIENCE: Experience or training that has provided the candidate with the skill to remove and replace aircraft parts, accessories, and components, and to make adjustments and settings according to established specifications. Must be skilled in the use of hand tools and test equipment. SPECIALIZED EXPERIENCE: Your resume and any other supporting documentation you wish to provide must clearly substantiate you currently possess the required length of specialized experience in the following:WG-05 REQUIRES 6 MONTHS: Experience using common hand tools in making repetitive mechanical repairs under close supervision. Experience that demonstrates the ability to perform the simpler and routine duties of the trade.WG-08 REQUIRES 12 MONTHS: Experience using common hand tools to make mechanical repairs. Experience removing and installing aircraft parts, components and accessories with detailed guidance. Experience in following detailed instructions in making routine, reoccurring repairs and modifications to aircraft parts, subassemblies and components, e.g. such as jacking and leveling aircraft, installing and adjusting engines, landing gear assemblies, instrument panels, and flight control systems.WG-10 REQUIRES 18 MONTHS: Experience or training installing, adjusting, aligning, troubleshooting and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification. Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow. Experience demonstrating the ability to instruct lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container.KNOWLEDGE, SKILLS AND ABILITIES:Ability to do diversified work with tools and equipment, requiring extreme caution in maintaining close dimensions.Knowledge of aircraft components and maintenance procedures.Ability to diagnose, troubleshoot and determine remedy where overall knowledge of all systems of aircraft is required.Ability to inspect aircraft, determine mechanical deficiencies and analyze results.Ability to interpret instructional material, schematics and specifications for complex mechanical problems on assigned aircraft.COMPATIBLE MILITARY ASSIGNMENT: All applications will be considered regardless of Branch/AOC/FA/MOS. Incumbent will be required to be assigned to compatible military position within 1 year of selection. The selected individual may be required to attend formal technician school training. MILITARY GRADE (Prior to Application): Enlisted: E-1 through E-8 UNIT OF ASSIGNMENT: Any aviation unit within state SPECIAL REQUIREMENTS: This position is covered by the medical monitoring program. Individual selected must undergo a preemployment physical examination prior to appointment. This position requires a security clearance (secret) which the applicant must possess or be able to obtain a clearance within one year of appointment. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed. STATEMENT OF DIFFERENCE: Individual selected at a lower level will be issued a Statement of Difference. Predicated upon qualifications, individual could be hired at the WG-10 grade. An individual selected for this position at the lower grade will progressively be advanced to WG-10 upon achievement of required qualifications without further competition. CONDITION OF EMPLOYMENT: Training at the National Guard Professional Education Center (NGPEC) is a mandatory condition of employment, subject to availability of resources. NGB prescribed courses at NGPEC must be completed within 6 months of assignment to this position. Failure to complete course(s) may result in reassignment or termination of full-time employment unless extenuating circumstances preclude course attendance. CONDITION OF EMPLOYMENT: You will be required to serve a 2-year trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: - your performance and conduct; - the needs and interests of the agency; - whether your continued employment would advance organizational goals of the agency or the Government; and - whether your continued employment would advance the efficiency of the Federal service. Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
- ...Summary THIS IS A TITLE 32 DUAL STATUS POSITION DUTY LOCATION... ...Duties Help JOB SUMMARY: The purpose of this... ...to perform the full range of aircraft maintenance duties including... ...hand tools in making repetitive mechanical repairs under close supervision...SuggestedPermanent employmentFull timeContract workTemporary workPart timeWork at officeRelocationTrial period
- ...This Is A Title 32 Dual Status PositionDuty Location: Army Aviation Support Facility (AASF), Windsor Locks, CTArea(s) Of Consideration:Area 1: All currently employed full-time permanent and indefinite personnel of the Connecticut Army National Guard.Area 2: All currently...SuggestedPermanent employmentFull timeTemporary work
- ...This Is A Title 32 Dual Status Position Duty Location: 103d Maintenance Squadron (MXS), East Granby, CT Areas Of Consideration: Area 1: All currently employed full-time permanent and indefinite personnel of the CTANG. Area 2: All currently employed full-time...SuggestedPermanent employmentFull timeTemporary work
- ...Aircraft Maintenance Duties JOB SUMMARY: The purpose of this position is to perform the full range of aircraft maintenance duties including troubleshooting, preventive maintenance, repair and ground testing of assemblies, systems and surfaces for one or more types...Suggested
- ...Aircraft Maintenance Technician Duties JOB SUMMARY: The purpose of this position is to inspect, repair, modify,... ...common hand tools in making repetitive mechanical repairs under close supervision.... ...testing, travel, and quarantine. Under 32 U.S.C. 709, Veterans Preference...SuggestedHourly payImmediate startRelocationTrial period
- ...Aircraft MaintenanceThe purpose of this position is to inspect, repair, modify, and service aircraft systems, components, and assemblies, both on- and off-aircraft. National Guard membership is required. This is an excepted position that requires membership in a compatible...Hourly payImmediate start
- ...Summary THIS IS A TITLE 32 DUAL STATUS POSITION DUTY LOCATION: 103d Medical Group (MG), East Granby, CT AREA(S) OF CONSIDERATION... ...that may convert to permanent without further competition. JOB SUMMARY: The primary purpose of the position is to serve as the...Permanent employmentFull timeContract workTemporary workPart timeWork at officeLocal areaWorldwideRelocation
- ...This Is A Title 32 Dual Status Position Duty Location: 103d Medical Group (MG), East Granby, CT Area(s) Of Consideration: Area... ...full-time temporary technician personnel and all current traditional members of the Connecticut Air National Guard. US Government JobsPermanent employmentFull timeTemporary work
$34 per hour
...Aircraft Maintenance TechnicianFlightcheck Commercial Aviation was founded in 2004 and is... ...Technician team in Windsor Locks, CT!The Aircraft Mechanic will perform aircraft line maintenance... ...rules and regulations.Accomplish job functions to the highest safety, quality,...Hourly payFlexible hoursNight shift- ...Immediate Airframe & Powerplant Mechanic Positions AvailableHSGI, Inc. has immediate Airframe... ...Mechanic positions available. The Aircraft Maintenance Technician reports directly to... ...resume to ****@*****.*** urgent job opportunity! Serious and experienced A&P...For contractorsImmediate start
$32 per hour
...Job Title This role is responsible for the safe and efficient repairing... ...maintenance team ensures our aircraft services team can operate... ...and availability Pay: $32/Hour What you will be doing... ..., electrical, fueling and mechanical systems. Perform monthly,...Local areaFlexible hours- Job Title: Aviation Electronics Technician (AE/AT) Category / Component: Enlisted • Active Overview Aviation Electronics, Electrical and Computer Systems Technicians keep Navy aircraft mission ready by maintaining, troubleshooting, and repairing the electrical power, avionics...Temporary workApprenticeshipWork at officeWorldwideNight shiftRotating shift
$5,000 per month
...Aircraft Maintenance Technician Working at Breeze Airways is an exciting endeavor and a... ...run-up and taxi procedures, and signing mechanical flight releases. The Aircraft Maintenance... ...levels in the organization Perks of the Job ~ Health, Vision and Dental ~ Health...Hourly payWork at officeLocal areaAll shiftsFlexible hoursShift work$33 - $40 per hour
...Title: Field Service Technician Salary: $33 -$40/hr + OT, DPOE Location: Based out of Windsor, CT but will Travel 80-90% of the time... ...skilled and motivated Traveling Service Technician with strong mechanical and electrical expertise to join our dynamic team. In this role...Permanent employmentNight shift$22 per hour
...Job Description Job Description Job Title: Junior Maintenance Technician Job Description This role oversees the maintenance and repair of equipment... ...technician on how to perform repairs. Must have some mechanical and electrical experience, but don't need to be an...Weekly payContract workTemporary workWork at officeRotating shiftWeekend workDay shiftAfternoon shift$32 - $38 per hour
...compensation range for this position is $32-38 per hour, depending on qualifications,... ...place to work! Come join our growing team!Job ResponsibilitiesPerform field service preventive... ...years of experience with basic rotational mechanical equipment, pumps, compressors, and blowers...Hourly payWork at office$32.3 - $38 per hour
...Job Title [UNION] Mobile Maintenance Technician Job Description Repairs RBMs, and PMs for approximately 22 retail building Cushman... ...wage for this role. The compensation for the position is: $32.30 - $38.00. Cushman & Wakefield is an Equal Opportunity employer...Minimum wageFlexible hours$30.34 per hour
...to safety, which will align successfully in the organization. Job Title: Mech & Robotics Tech Location: Windsor, CT Pay Range: $30.34/... ...to ensure equipment reliability. Troubleshoot electrical and mechanical issues related to Material Handling Equipment (MHE), including...Weekly payTemporary workFlexible hoursShift workNight shift$30.34 per hour
...safety, which will align successfully in the organization. Job Title: Mech & Robotics Tech Location: Windsor, CT Pay Range:... ...ensure equipment reliability. Troubleshoot electrical and mechanical issues related to Material Handling Equipment (MHE), including...Weekly payTemporary workFlexible hoursShift workNight shift$24 per hour
...Job Title SP+ Maintenance Supervisor Job Description SP+, a Metropolis company, is an artificial intelligence company for the... ...maintenance. Ability to perform general repair, electrical, mechanical, and cleaning maintenance. Desire a minimum of six months...Hourly payTemporary workWork at officeFlexible hoursShift workAfternoon shift- ...Job Description Job Description Job Title: Field Service Technician I Description: A wireless communications company with advanced technology to address the nation’s first-responder interoperability crisis seeks motivated field technicians to help design and deploy...
- ...Job Description Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution... ...equipment - Field service / industrial maintenance - Aircraft mechanics If you have strong troubleshooting skills and experience...Flexible hoursNight shift
$33 - $35 per hour
...Job Description Job Description Description: Field Service Technician Location: Connecticut/Northern Massachusetts... ...candidate will have strong electronics troubleshooting skills, mechanical aptitude, and experience working with X-ray or laboratory instrumentation...Hourly payFull timeContract workWorldwideNight shift$25 per hour
...Job Description Job Description Your dependability, organization, and people skills will shine in this role as you become an integral part of our customer-focused team. We offer competitive wages alongside a rewarding commission plan, and a comprehensive benefits package...Work at officeLocal areaWorldwideMonday to FridayWeekend work- ...commitment to a diverse workplace free of discrimination and harassment. Vesta recruits, hires, trains, and promotes individuals in all job titles without regard to any protected characteristic, including but not limited to race, color, creed, religion, ancestry, sexual...Temporary workImmediate startNight shiftWeekend work
$18 - $25 per hour
...Job Description Job Description Join Our Team as a Drain Service Technician! Who We Are Aiello Home Services has proudly... ...A valid driver’s license with a clean driving record Strong mechanical and technical aptitude A professional, customer-focused demeanor...Hourly payTemporary workFlexible hours$35 - $40 per hour
...repairing, testing, and performing preventive maintenance activities. Job Description Location: 500 North St Windsor Locks, CT 06096 Earn... ...and running diagnostics. Be able to remove and replace mechanical parts of the conveyor such as: repairing broken chain, belting,...Part timeShift workAfternoon shift$39 - $44 per hour
...Calibration Technician (Metrology Lab) Location: Windsor Locks, CT (06096) Job ID: #73055 Pay Range: $39-44 Job Description Provide technical leadership and engineering support for the Metrology Laboratory. This position is responsible for ensuring accurate...- ...each offering accident repair, painting, refurbishment, and heavy mechanical repair. We are supported by a 24/7 in-house call-center and... ...Possess and supply a set of hand tools necessary to perform required job duties. OEM training and certifications are preferred....Weekly payCurrently hiringLocal area
$25 - $45 per hour
...Job Description Job Description Job Title: Electrician Job Description This role focuses on performing a wide range of electrical work in commercial buildings, ensuring safe, reliable, and compliant installation, maintenance, and repair of electrical systems....Weekly payContract workTemporary workApprenticeship
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to AIRCRAFT MECHANIC (Title 32) Jobs. Be the first to apply!
- aircraft maintenance part time Windsor Locks, CT
- aircraft maintenance Windsor Locks, CT
- aircraft aviation Windsor Locks, CT
- aircraft Windsor Locks, CT
- turboprop aircraft mechanic
- junior aircraft mechanic
- entry level aircraft mechanic
- aircraft composites technicians
- overseas aircraft mechanic
- aircraft mechanic part time



