Assembly Tech IV
Arterex
Job Description
Job Description
Job Title: Assembly Technician IV
Department: Operations
Reports To: Production Supervisor
FLSA Status: Non-Exempt
Job Summary and Objectives:
The Assembly Technician IV performs advanced assembly and testing of complex FDA Class II and III medical devices; including implantable medical devices in a Class 7 cleanroom environment. This position requires proficiency across multiple products and manufacturing processes, including mechanical, electrical, pneumatic, and fluidic assemblies and processes.
Working with minimal supervision, the Assembly Technician IV serves as a technical resource for production personnel, troubleshoots complex assembly and test issues, and provides hands-on training and mentoring to Assembly Technicians I, II, and III. The position partners with Production, Engineering, and Quality to resolve manufacturing problems, support new product introductions, and improve quality and production efficiency while following approved procedures and maintaining required good documentation practices (GDP).
Essential Duties and Responsibilities
- Perform the most complex assembly and final-build operations within assigned product lines, using approved drawings, schematics, work instructions, fixtures, and equipment.
- Demonstrate proficiency across multiple assembly processes and provide technical support to Assembly Technicians I, II, and III.
- Accurately perform calculations and properly choose proper pass/fail decisions where required based on documented specifications.
- Perform precision assembly in designated cleanroom environments while following approved gowning, hygiene, cleaning, material-transfer, and contamination-control procedures.
- Serve as a resource for cleanroom practices, identify potential contamination risks, and promptly escalate departures from established requirements.
- Troubleshoot complex mechanical, electrical, pneumatic, and fluidic assembly problems using approved diagnostic methods and test equipment.
- Perform authorized rework and repair in accordance with approved instructions and applicable training.
- Serve as a designated trainer for assigned processes; demonstrate proper techniques, assess trainee performance, and document training in accordance with Company procedures.
- Assist production management with daily work coordination, technical questions, and identification of material, equipment, or process constraints.
- Support Engineering and Quality with pilot builds, production transfers, process validation activities, and investigation of recurring defects.
- Recommend improvements to work instructions, tooling, fixtures, workstation layout, and assembly methods; implement changes only after required approval.
- Complete accurate production, inspection, test, and traceability records, and review assigned records for completeness when authorized.
- Identify and escalate nonconforming product, process deviations, and equipment concerns in accordance with Company procedures.
Additional Required Skills/Abilities
- Advanced ability to interpret assembly drawings, electrical schematics, wire-run diagrams, bills of materials, and complex work instructions.
- Experience with building implantable medical devices beneficial.
- Demonstrated ability to diagnose assembly and test failures and communicate findings to Production leadership, Engineering, and Quality.
- Proficiency in cleanroom gowning, contamination prevention, controlled material handling, and cleaning practices.
- Ability to train others effectively and reinforce consistent adherence to approved methods.
- Ability to recognize when an issue requires escalation or additional authorization.
- Ability to work under a microscope with very small, fragile components.
- Ability to perform soldering tasks.
- Strong mechanical and electrical aptitude abilities, including troubleshooting assemblies when required.
- Use of manual and electronic torque tools, and other wrenches and tools.
- Use of wire cutters, crimping tools, and soldering.
- PCBA handling, integration, and connectivity with proper ESD practices.
- Assembly of pneumatic and fluidic systems including pumps, tubing, and various interconnects.
- Use of inspection tools such as vernier calipers and digital height gauges.
- Use of part cleaning technologies such as ultrasonic cleaning.
- Ability to communicate effectively through oral and written communications.
- Ability to work with others collaboratively.
- Attention to detail to understand and meet the requirements.
- Strong organizational skills.
- Demonstrated problem solving ability in a cross functional environment.
- Take responsibility for task and time management.
- ...shaping the future of healthcare. Build Your Career as a Cell Tech-I in a High-Precision Manufacturing Environment! Join a team... ...production equipment, responsible for manufacturing and assembly of customer products. Follows blueprints, guidelines and travelers...SuggestedContract workMonday to FridayFlexible hoursDay shift
$22 - $25 per hour
...Adecco is currently hiring a Printer Assembler for Tekscan in Norwood, MA. This is a great opportunity to join an innovative manufacturing company that develops advanced force measurement, pressure mapping, and tactile sensing technology used across the medical device,...SuggestedHourly payTemporary workCurrently hiringLocal areaMonday to FridayFlexible hoursShift workDay shift- ...school diploma or equivalent, strong analytical, problem solving, mathematical and communication skills. Familiarity with small parts assembly. Language Skills: Ability to write reports, business correspondence, procedure manuals, and maintain a notebook on processes...SuggestedLocal areaFlexible hours
$90k - $110k
...you! Based in our Mansfield, MA location, you will be responsible for the supervision and leadership of our union hourly Valve Assembly Department. You will be accountable for managing the day-to-day operations to maximize production while improving our safe workplace...SuggestedHourly payContract workTemporary workLocal areaFlexible hours$32.91 - $35.62 per hour
...JOB DESCRIPTION Description In This Role, Your Responsibilities Will Be: • We assemble and test relief valves on air, water, steam, ammonia or gas to meet required pressure specifications. • Make decisions with respect to the proper action of the valve such...SuggestedTemporary workFlexible hours$23 - $29.9 per hour
...location. About the Role: Seating Technician As a Seating Technician at Numotion, you will be a key player in the successful assembly, delivery, and fitting of Complex Rehabilitation Technology (CRT) equipment. This role supports the Assistive Technology...Hourly payTemporary work- ...overall quality and safety of Smith + Nephew medical devices.What will you be doing?Perform complex inspections of components and assemblies, including GD&T interpretation and Vision System AnalysisLead and execute First Article Inspections (FAI), process validations,...Flexible hours
$23 per hour
...Assembler IIICoWorx Staffing Services is seeking an Assembler III in the Mansfield, MA area. Build high-quality products that make a difference! Are you an experienced assembly professional with strong mechanical and electrical skills? Do you take pride in producing high...Monday to Friday$26 - $32 per hour
...Adecco is hiring for Assembly Technicians in Cambridge! The position is direct hire, fully onsite in Cambridge, MA. Pay rate: $26-32 an hour DOE Responsibilities: Technicians work on a range of complex material processing techniques including epoxy bonding...Hourly payPermanent employmentTemporary workWork at officeLocal areaImmediate startFlexible hours- C&W Services is seeking a Mechatronics & Robotics Technician to support the Operations Maintenance Team in maintaining and repairing material handling equipment and pneumatic systems throughout the facility. You will install, maintain, and repair automated packaging and...
- ...AssemblerLocation: Mansfield, MA, US, 2048 Business Unit: Advanced Medical ComponentsWe are searching for entry level Assemblers to work 1st shift (7:00 am - 3:30 pm) Monday through Friday. In this role you will help move a product towards the consumer market. You will...Monday to FridayDay shift
$127.3k - $165.5k
...designing AUV/ROV systems. Technically execute the research and development of new circuit card designs and electromechanical assemblies. Lead and execute functional analysis, evaluation, and optimization of product designs. Present technical results and...Temporary workFor contractorsWork experience placementFor subcontractorCasual workLocal areaRemote work$20 per hour
...Adecco Staffing is working with a leading medical device manufacturing company in Mansfield, MA to bring on experienced Cleanroom Assemblers. This is a great opportunity for someone who enjoys hands-on work and has strong attention to detail. The company offers a clean,...Hourly payWeekly payTemporary workLocal areaMonday to FridayShift workDay shift$3,254 per week
...Cath Lab Tech Location: Brockton, MA Agency: TGL MedStaff Pay: $3,254 per week Shift Information: 4 days x 10 hours Contract Duration: 13 Weeks Start Date: 11/23/2026 About the Role: TGL MedStaff is seeking a Cath Lab Tech for a travel...Full timeContract workSummer workShift work- ...Mechanical prototype/pre-production design builds, cable/cable harness fabrication and system/sub-system chassis integration and assembly where you will identify and provide feedback of potential issues or improvements prior to production. Responsibilities will include...Work experience placementFlexible hours
$22 - $25 per hour
...Adecco is currently hiring a Printer Assembler for Tekscan in Norwood, MA. This is a great opportunity to join an innovative manufacturing company that develops advanced force measurement, pressure mapping, and tactile sensing technology used across the medical device,...Hourly payTemporary workCurrently hiringLocal areaMonday to FridayFlexible hoursShift workDay shift$22 - $25 per hour
...Adecco is currently hiring a Printer Assembler for Tekscan in Norwood, MA. This is a great opportunity to join an innovative manufacturing company that develops advanced force measurement, pressure mapping, and tactile sensing technology used across the medical device,...Hourly payTemporary workCurrently hiringLocal areaMonday to FridayFlexible hoursShift workDay shift$3,195 - $3,395 per week
...CT Tech Location: Brockton, MA Agency: Jackson HealthPros Pay: $3,195 to $3,395 per week Shift Information: 4 days x 10 hours Contract Duration: 13 Weeks Start Date: 11/30/2026 About the Position Become a vital part of Jackson HealthPros...Weekly payFull timeContract workTemporary workRelocation packageShift workWeekend work$2,930 per week
...CT Tech Location: Brockton, MA Agency: TGL MedStaff Pay: $2,930 per week Shift Information: Nights - 3 days x 12 hours Contract Duration: 13 Weeks Start Date: 12/7/2026 About the Role: TGL MedStaff is seeking a CT Tech for a travel...Full timeContract workSummer workShift workNight shift3 days per week$3,254 per week
...CT Tech Location: Brockton, MA Agency: TGL MedStaff Pay: $3,254 per week Shift Information: Days - 4 days x 10 hours Contract Duration: 13 Weeks Start Date: 12/7/2026 About the Role: TGL MedStaff is seeking a CT Tech for a travel...Full timeContract workSummer workShift work$600 - $800 per week
...CT Tech Location: Brockton, MA Agency: Jackson HealthPros Pay: $600 to $800 per week Shift Information: Nights - 4 days x 10 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position Become a vital part of Jackson...Weekly payFull timeContract workTemporary workRelocation packageShift workNight shiftWeekend work$29.25 - $34.41 per hour
Mechatronics & Robotics TechnicianAt C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team.C&W Services provides compelling benefits, including:...Flexible hours- ...leadership role Experience in the setup and operation of manufacturing processes/equipment. Broad experience with components and assembly. Knowledge of production and processing and other techniques for maximizing the effective manufacture of products....Work at officeLocal areaAll shiftsShift workDay shift
- ...Job Summary: The role of the Assembly Technician III is to perform and ensure production assembly tasks are actively completed to meet production schedules while upholding the highest level of quality. The assembler will assemble products by using a variety of hand...Temporary workRemote work
$22 - $25 per hour
...Adecco is currently hiring a Printer Assembler for Tekscan in Norwood, MA. This is a great opportunity to join an innovative manufacturing company that develops advanced force measurement, pressure mapping, and tactile sensing technology used across the medical device,...Hourly payTemporary workCurrently hiringLocal areaMonday to FridayFlexible hoursShift workDay shift$36.68 - $43.15 per hour
Job TitleSenior Mechatronics & Robotics Technician Job Description Summary Job Description At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team...Weekly payMinimum wageFlexible hours$3,189 - $3,564 per week
...Cath Lab Tech Location: Brockton, MA Agency: Prime Time Healthcare Pay: $3,189 to $3,564 per week Shift Information: Rotating - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: ASAP About the Role: Prime Time Healthcare is seeking...Full timeContract workSummer workImmediate startShift workRotating shift$22 - $25 per hour
...Adecco is currently hiring a Printer Assembler for Tekscan in Norwood, MA. This is a great opportunity to join an innovative manufacturing company that develops advanced force measurement, pressure mapping, and tactile sensing technology used across the medical device,...Hourly payTemporary workCurrently hiringLocal areaMonday to FridayFlexible hoursShift workDay shift$22 - $25 per hour
...Adecco is currently hiring a Printer Assembler for Tekscan in Norwood, MA. This is a great opportunity to join an innovative manufacturing company that develops advanced force measurement, pressure mapping, and tactile sensing technology used across the medical device,...Hourly payTemporary workCurrently hiringLocal areaMonday to FridayFlexible hoursShift workDay shift- Discover Your Ideal Job Opportunities with Us At Greenlight Professional Services, our mission is to help you uncover job opportunities that align with your career goals and skill set. Our distinctive recruiting approach sets us apart: we blend a deep, personal understanding...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Assembly Tech IV. Be the first to apply!
- electronic assembly manufacturing Mansfield, MA
- assembly position Mansfield, MA
- advanced assembly Mansfield, MA
- tech services manager Mansfield, MA
- advanced technology Mansfield, MA
- process tech Mansfield, MA
- technology sales associate Mansfield, MA
- electrical tech Mansfield, MA
- design technology Mansfield, MA
- operations tech Mansfield, MA



