Quality Weld Inspector (1:00pm to 9:30pm) 2nd Shift
$28.5 - $30.25 per hourG&W Electric Co
Job Description
We are looking to hire an enthusiastic and hardworking quality weld inspector with a good eye for detail and knowledge of weld materials, processes, technique, and overall weld integrity and quality.
The Quality Inspector – Weld & Fabrication ensures welded and fabricated products meet engineering drawings, welding requirements, customer specifications, and quality standards. This role works primarily on the manufacturing floor, inspecting parts at key stages of production to identify and contain quality issues early. The inspector works closely with Welders, Team Leaders, Supervisors, Welding Engineering, Manufacturing Engineering, and Quality Engineering to build quality into the process and prevent defects from moving downstream.
Essential Duties and Responsibilities
In-Process and Floor Inspection
- Perform pre-weld, in-process, and final inspections according to drawings, specifications, inspection plans, and procedures.
- Verify products meet requirements before they move to the next operation.
- Identify quality issues and process deviations early to reduce rework, scrap, and production delays.
- Provide immediate feedback to Welders, Team Leaders, and Supervisors when problems are found.
- Verify all required inspections and quality checkpoints are completed.
Pre-Weld and Fit-Up Inspection
- Verify materials, components, and configurations against drawings, BOMs, and specifications.
- Inspect joint prep, fit-up, alignment, gaps, dimensions, cleanliness, and overall readiness for welding.
- Verify weld locations, weld sizes, and welding symbols against engineering drawings.
- Confirm the correct Welding Procedure Specification (WPS) is available and being followed.
- Identify and contain nonconforming conditions before welding begins whenever possible.
Weld Inspection
- Perform visual inspections of welded assemblies for compliance with drawings, WPS requirements, workmanship standards, and applicable welding codes.
- Inspect weld size, length, location, profile, continuity, and overall workmanship.
- Identify weld defects such as cracks, porosity, undercut, overlap, incomplete welds, arc strikes, excessive reinforcement, and other unacceptable conditions.
- Inspect repaired or reworked welds before product release using appropriate weld gauges and measurement equipment.
- Support additional NDT activities when required and properly qualified.
Dimensional Inspection
- Inspect fabricated parts and welded assemblies against engineering drawings and specifications.
- Verify critical dimensions, tolerances, alignment, squareness, flatness, hole locations, and other required characteristics.
- Use calibrated inspection equipment such as calipers, micrometers, weld gauges, squares, tape measures, fixtures, and other measuring devices.
- Perform dimensional inspections throughout the manufacturing process to identify problems before fabrication is complete.
Final Inspection and Product Release
- Perform final visual and dimensional inspections of completed products.
- Verify all required manufacturing and inspection steps have been completed.
- Confirm all nonconformances and rework have been properly addressed.
- Complete inspection records and quality documentation accurately and on time.
Nonconformance and Containment
- Identify, document, tag, and segregate nonconforming material and products according to company procedures.
- Initiate or support NCR/NCMR documentation as required.
- Prevent nonconforming products from moving to the next operation without review and disposition.
- Verify rework and repairs are completed correctly.
- Support immediate containment when quality issues are identified.
Problem Solving and Continuous Improvement
- Support root-cause investigations and corrective actions related to welding and fabrication defects.
- Identify recurring quality problems and communicate trends to Production and Quality leadership.
- Work with Production, Welding Engineering, Manufacturing Engineering, and Quality Engineering to eliminate recurring defects.
- Participate in improvement efforts to reduce defects, rework, scrap, and downstream quality escapes.
- Help verify corrective actions and process improvements on the manufacturing floor.
Quality System and Documentation
- Maintain accurate inspection records and product traceability.
- Follow Quality Plans, Control Plans, inspection procedures, work instructions, and mfg. standards.
- Verify inspection equipment is calibrated and within its calibration period before use.
- Report damaged, inaccurate, or out-of-calibration equipment.
- Support internal and external quality audits as needed.
- Keep quality records organized and accurate.
Education and Experience: Minimum
- High school diploma or GED required; technical or manufacturing education preferred.
- Previous quality inspection experience in welding, metal fabrication, machining, or manufacturing.
- Ability to read and understand engineering drawings, tolerances, and welding symbols.
- Working knowledge of welding and fabrication processes.
- Ability to understand and follow Welding Procedure Specifications (WPS).
- Experience using dimensional and weld inspection equipment.
- Ability to accurately document inspection results and nonconformances.
- Strong attention to detail and ability to identify quality and workmanship issues.
- Strong communication skills with production employees, Team Leads, Supervisors, Engineers, & Quality.
Education and Experience: Preferred
- Experience inspecting MIG, TIG and other welding processes.
- Knowledge of applicable AWS and/or ASME welding requirements.
- AWS Certified Welding Inspector (CWI) certification or equivalent welding inspection training.
- Experience with Visual Testing (VT) and other NDT methods such as Penetrant Testing (PT), Magnetic Particle Testing (MT), or Ultrasonic Testing (UT).
- Experience with NCR/NCMR systems, root-cause analysis, corrective actions, and continuous improvement.
- Experience with Lean Manufacturing or World-Class Manufacturing practices.
Knowledge, Skills, Competencies
- Excellent verbal and written communication skills
- Analytical abilities with good attention to detail
- Proficiency in Microsoft Word and Excel
What we offer you:
Pay Range is typically between $28.50 - $30.25 per hour plus shift differential.
Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications.
G&W Electric offers a comprehensive benefits package that includes:
- Medical, Dental and Vision Insurance
- Short and Long-Term Disability
- Life Insurance
- Health club membership program and reimbursement
- Employee Assistance Program
- Tuition Reimbursement
- 401 (k)
- Annual Profit Sharing
- Vacation
- Air-conditioned/heated state-of-the-art manufacturing facility
About G&W Electric
Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive.
Learn more about our company by watching this video:
G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world!
G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires.
*G&W Electric participates in the E-Verify process for all new hires.
VEVRAA Federal Contractor
$27 - $31 per hour
...square up, fit, stiffen and tack weld a variety of subassemblies and... ...by completing production and quality forms Train others on proper... ...Titles Frequencies - Occasional (1-33%); Frequent (34-66%);... ...between $27 - $31 per hour plus shift differential. Please note the...Afternoon shiftHourly payTemporary workFor contractorsWork experience placementLocal areaWorldwideShift work$20 - $24 per hour
...Fabricator I - Brake Press and Saw Operator (1:00pm to 9:30pm) In this job you will set-up and operate one-two pieces of fabrication equipment... ...next operation Document actions by completing production and quality forms We are looking for someone who: Is able to read and...SuggestedHourly payTemporary workWork experience placementLocal areaWorldwide- G&W Electric Co is seeking aQuality Weld Inspector (5:00am to 1:30pm) to ensure welded and fabricated products meet engineering drawings, welding requirements, customer specifications, and quality standards. The role focuses on in-process and floor inspections on the manufacturing...SuggestedEarly shift
$26 - $28 per hour
...for setting up and operating welding equipment together with atmospheric... ...by completing production and quality forms Communicate... ...experience (preferred) Has 0-1 years of working experience in... ...between $26 - $28 per hour plus shift differential Please note the...Afternoon shiftHourly payTemporary workFor contractorsWork experience placementLocal areaWorldwideShift work$20 - $23 per hour
...operation to detect defects Determine material flow and coating quality by performing visual inspections Bake/cure parts at... ...written instructions in English. Ideally you will also have: 1-2 years’ experience working in a manufacturing environment 1-2...Afternoon shiftHourly payTemporary workFor contractorsWork experience placementLocal areaWorldwide$27.75 per hour
...employees performing that work. This is a 2nd shift position 2:00pm-10:30pm. As a Team Lead II you will:... ...operators on proper work techniques, quality and safety procedures, and housekeeping... ...Titles Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous...Afternoon shiftTemporary workFor contractorsLocal areaWorldwideShift work$27 - $30 per hour
Welder II (2nd Shift) - 1:00 PM to 9:30 PM Join G&W Electric Co. as a Welder II on the 2nd Shift. The... ...performing moderate‑to‑advanced MIG/TIG welding in various positions and assembling... ...actions by completing production and quality forms. Qualifications High School diploma...Afternoon shiftHourly payTemporary workWork experience placementWorldwide$22.5 - $23.75 per hour
...Job Description Production Inspector In this job you will inspect component parts and... ...Document actions by completing production and quality forms We are looking for someone who:... ...and skill development Ideally has 1 - 3 years of experience working in a...Hourly payTemporary workFor contractorsWork experience placementLocal areaWorldwide$22.5 - $23.75 per hour
...operations of basic complexity. This is a 2nd shift position 2pm-10:30pm. As an Assembler I you will:... ...actions by completing production and quality forms We are looking for someone who... ...skill development Ideally has 0-1 year experience working in a manufacturing...Afternoon shiftHourly payTemporary workFor contractorsWork experience placementLocal areaWorldwide- G&W Electric Co. is seeking a Quality Weld Inspector for the 1st shift (5:00am to 1:30pm) on the manufacturing floor. The role focuses on inspecting welded and fabricated parts to ensure conformance with drawings, WPS, and quality standards. You'll work with Welders, Team...Day shift
$24 - $30 per hour
Overview Laser Operator (2:30pm to 11:00pm) CNC MAZAK at G&W Electric Co. In this role you will operate, program, and troubleshoot Mazak laser... ...usage, maintain machine performance, and ensure high-quality production standards. Responsibilities Operate and maintain Mazak...Hourly payTemporary work$16.5 per hour
...Job Description Job Description 2nd shift general labor We are hiring MOTIVATED and RELIABLE Warehouse Associates to join our... ...Maintain a clean and safe work area Option of : ~1st shift (9:00am-5:30pm) 1st shit (6am-2:30pm) Pay Rate : ~2nd shift: 16.50$...Afternoon shiftWeekly payWork at officeShift workDay shift$21 per hour
...opportunities! Positions Available: Warehouse Associate and Forklift Operator Shifts: #1st Shift 5:30am-1:30pm or 6:00am 2:00pm - Plus mandatory OT as needed; Pay $21/hr #2nd Shift 1:30pm-9:30pm or 2:00pm 10:00pm - Plus mandatory OT as needed; Pay $21.50/hr #3rd...Afternoon shiftImmediate startShift workNight shiftDay shift$22.5 - $23.75 per hour
...operations of basic complexity. Position is for 2nd shift As an Assembler I you will:... ...Document actions by completing production and quality forms We are looking for someone who... ...and skill development Ideally has 0-1 year experience working in a manufacturing...Afternoon shiftHourly payTemporary workFor contractorsWork experience placementLocal areaWorldwideShift work- ...labor-intensive environment. Schedule: Schedules are subject to change based on workload. Monday - Friday ~1st Shift - 7am to 5:30pm ~2nd Shift - 5pm to 3:30am Minimum Qualifications: High school diploma or equivalent Ability to lift up to 60 pounds...Afternoon shiftMonday to FridayFlexible hoursDay shift
$19.5 per hour
...is a full-time warehouse opportunity with multiple shifts available. Please be prepared to provide an... ...Schedule:Weekday 1st Shift: Monday - Friday, 5:00am - 1:00pm ($19.50/hour)Weekday 2nd Shift: Monday - Friday, 1:30pm - 10:00pm ($20.50/hour)Weekday 3rd Shift: Monday -...Afternoon shiftHourly payFull timeLocal areaMonday to FridayShift workNight shiftDay shiftWeekday work$21 per hour
...a full-time opportunity on the 2nd Shift, Monday through Friday, 2:30pm until finish. The pay rate is $2... ...picked items meet quantity and quality requirements Operating cherry... ...applications Monday through Friday from 9:00am - 11:00am and 1:00pm - 3:00pm. Total TalentAfternoon shiftHourly payWeekly payFull timeMonday to FridayFlexible hours- G&W Electric Co. is hiring a Quality Weld Inspector to ensure welded and fabricated products meet engineering drawings, welding requirements, and customer specifications. The role is based on the manufacturing floor, inspecting parts at key production stages to prevent...
- G&W Electric Co. is seeking a Quality Weld Inspector to ensure welded and fabricated products meet engineering drawings, welding requirements, and customer specifications. The role focuses on in-process inspections on the manufacturing floor, working with welders and engineering...
$20 - $20.5 per hour
...team as a Production Packer on the 2nd shift, working from 2:00pm to 10:30pm, Monday through Friday. This role involves... ..., labeling accuracy, and overall quality. Maintain accurate production... ...To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly...Afternoon shiftWeekly payContract workTemporary workMonday to FridayShift work$17 - $19 per hour
...Quality Control InspectorThe Quality Control Inspector is responsible for real time opening, inspections, disposition and... ...and from floor location throughout shift as needed.Communicate with Returns... ...pathwaysEmployee Discount starting on Day 1, plus exclusive partner...Hourly payLocal areaRelocationShift work$19.5 per hour
...is a full-time warehouse opportunity with multiple shifts available. Prior Stand up Dock Loader/Stand up... ...Schedule:Weekday 1st Shift: Monday - Friday, 5:00am - 1:00pm ($19.50/hour)Weekday 2nd Shift: Monday - Friday, 1:30pm - 10:00pm ($20.50/hour)Weekday 3rd Shift: Monday -...Afternoon shiftHourly payFull timeLocal areaMonday to FridayShift workNight shiftDay shiftWeekday work$70k - $75k
...resolving issues. This is an on-site role Mon - Friday, 2nd shift, 3PM 11:30PM. Attractive annual salary of $70,000 - 75,000 plus bonus... ..., complaints and associate concerns productivity and quality of work. Oversee 30-40 associates. Maintain proper Good...Afternoon shiftTemporary workWork at office$19 - $21 per hour
...identities with us. Job Summary The Quality Inspector will assist with quality control... ...personalization facility working 1st shift Monday - Friday 6:00am - 2:00pm. Duties & Essential Job Functions Assist... ...diploma or GED required. At least 1 year of related experience in a...Hourly payTemporary workWorldwideMonday to FridayFlexible hoursDay shift$21.5 per hour
...Additional Pay: $0.50 per hour when assigned to second shift # Schedule: 2nd Shift Monday-Friday 2:30pm - 11:00pm Ryder Warehouse Associates work in clean,... ...K etc. Start at 30 Days ~ Earn PTO starting Month 1. Up to 80 hours accrued in 1st year ~401 K offers...Afternoon shiftHourly payWeekly payContract workMonday to FridayFlexible hoursShift work$700 - $1,200 per week
...Joliet, IL $700 - $1200 paid weekly 2nd shift 1:00 PM to finish Sunday - Thursday 3rd shift 9:00 PM to finish Sunday - Thursday Performance-based opportunity with the ability to increase your earnings through productivity and attendance. Benefits Weekly Pay Medical, Dental...Afternoon shiftWeekly payShift workNight shift$21 per hour
...Now hiring Warehouse Associates in Aurora, with various shift options offering new seasonal pay rates up to $21/hour*.... ...through Saturday, November 21st Time: Mon-Fri 8:00am-4:30pm | Sat 8:00am-1:00pm Event Address: 400 Smoke Tree Plaza, Ste 100, North Aurora...Afternoon shiftFull timePart timeSeasonal workImmediate startFlexible hoursShift work- Warehouse Receiving Associate Unloads and receives all inbound merchandise. Checks accuracy before receiving merchandise into the Catalyst/WMS system. Utilizes a lumper service. Builds and secures pallets for storage. Properly processes required paperwork. Maintains...Afternoon shift
- ...Shipping Loader Become part of our team as a Shipping Loader, supporting efficient warehouse operations during the 2nd shift. Load trailers safely, ensure accurate shipment, and maintain team standards. Qualification/Basic Job Requirements: Load trailers while...Afternoon shiftFull time
- Distribution Center Team Member We are looking for a team player with proven retail distribution success to work in a fast-paced distribution center. General Summary: Loads and unloads trailers, moves merchandise from area to area and uses conveyors or forklift equipment...Afternoon shiftFull timeRemote workRelocation
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Quality Weld Inspector (1:00pm to 9:30pm) 2nd Shift. Be the first to apply!



