CNC Machinist - Milling

Kinetic Engine Systems

Job Position Summary: Responsible to set up and run parts and be able to inspect their work and if needed make adjustments to produce a quality part.

Minimum Requirements:

High School Diploma or Equivalent, Tech School preferred
8+ yrs Experience operating a CNC Machine
2+ yrs Experience in Aerospace industry.
Knowledge of various metals, alloys, and other materials to optimize proper speeds and feeds.
Skilled in performing precision work on parts that present complex configurations and close tolerance between interrelated surfaces
Mechanical Aptitude
Strong attention to details
Organizational skills.
Basic computer skills
Time Management Skills
Ability to use inspection tools such as micrometers, calipers, indicators.
Ability to do basic set ups on 3, 4, and 5 Axis Machines
Ability to read and interpret basic blueprints and company operation sheets.
Ability to effectively communicate both written and verbally.
Ability to use the Machine Control to set tools and enter offsets into Machine Control.
Skilled in using various machine attachments
Ability to follow set up instructions including setting up fixtures, vices, and rotaries.
Ability to do complex Troubleshooting on complex machines.
Must be able to work independently with minimum supervision.
Ability to work with Engineering on tool prove outs on new jobs.
Ability to work a wide range of all types of machines.
Ability to train other machinist within 180 days.
Ability to work well with other employees.
Ability to Identifies areas for improvement and think strategically to enhance efficiency within 180 days.
Ability to work overtime, including weekends

Duties/Responsibilities:

Ensure adherence to safety regulation and standard. Follow Safety culture and wear PPE when required.
Operates multiple complex CNC Milling Machines of the same function.
Perform precision work on parts with complex configurations and close tolerance between interrelated surfaces.
Follows Ops sheets and written or verbal instructions for product specifications.
Operate within AS9100/ISO9001 requirements to include proper documentation, revision control, traceability, and lot control.
Observes overall operation and performs regular daily maintenance on equipment and work area.
Follows and does setup instructions and applies knowledge of procedures to acquire first piece inspections.
Verifies and visually inspects work and dimensions per operations sheet to specification using measuring instruments such as micrometers, calipers, and preset gages.
Fills out production paperwork and inspection procedures as required.
Reports any problems or discrepancies to immediate supervisor.
Maintains tools, gages, and equipment in a clean, orderly, and safe manner.
Maintains specifications by observing tooling; taking measurements; detecting malfunction.
Inspects and visualize the finished part and critical surfaces, dimensions, and tolerances.
Maintains specifications by trouble shooting processes; adjusting controls; replacing worn tools.
Works with Engineering on Tool prove outs on new jobs.
Adjusts controls to set specified speeds, and feed rate on new jobs.
Troubleshoots complex machines and works directly with Programming and inspection to adjust CNC programs, as required.
Identifies areas for improvement in the production processes and implements strategies to enhance efficiency.
Provides effective (OJT on the job) training to new and existing employees, ensuring they have the necessary skills and knowledge to perform their jobs.

Working Conditions :

Normal Production environments, subject to high noise levels from operating machines; physical hazards from moving equipment and sharp machine parts; breathing fumes, dust, and mist; skin exposure to oil and cutting fluid; exposure to sharp metal edges, and forklifts.
May be asked to travel back and forth between Southwick and Westfield facilities.

Physical Requirements:

Must have ability to read applicable customer documents with or without corrective lenses.
May have to lift up to thirty (30) pounds at a time, as required.
Must be able to push, pull, reach overhead, stand, walk, climb stairs, bend and/or sit for long periods of time.

1st Shift - 7:00-3:30pm Monday - Friday
2nd Shift - 3:30-12am Monday - Friday

25% - 2nd Shift Differential

Apply

Vacancy posted 5 days ago

Similar jobs that could be interesting for youBased on the CNC Machinist - Milling in Southwick, MA vacancy

CNC Machinist - Milling
...able to inspect their work and if needed make adjustments to produce a quality part. Minimum Requirements: ~3 + years of CNC Milling Machinist experience ~ High School Diploma or Equivalent. Tech School preferred. ~ Experience in Aerospace industry. ~ Knowledge...
Suggested
Immediate start
Monday to Friday
Day shift
Afternoon shift
Kinetic Engine Systems
Westfield, MA
5 days ago
CNC Machinist - Weekends
...CNC Machinist 4-Axis Haas Mill (Mastercam) Millennium Power Service is hiring an experienced CNC Machinist with strong 4-axis milling and Mastercam programming experience to support precision manufacturing operations at our Westfield, MA facility. This position...
Suggested
Temporary work
Monday to Friday
Weekend work
ZZZDoNotUSeMillennium Power Services
Westfield, MA
5 days ago
CNC Milling Machinist (2nd Shift)
...years of experience machining in an aerospace environment ~ Three (3) or more years of experience setting up and operating CNC Devlieg Milling Machines ~ Needs to be familiar with Fanuc controls; willing to cross train on various operations/equipment ~ Strong mathematical...
Suggested
Permanent employment
For contractors
Immediate start
Afternoon shift
Barnes Group Inc.
East Granby, CT
5 days ago
CNC Milling Machinist (2nd Shift)
...years of experience in an aerospace or high precision manufacturing environment preferred. ~3 years of experience operating CNC multi-axis Milling machine preferred. ~ Experience setting up and changing over jobs on CNC equipment. ~ Exceptional mechanical ability...
Suggested
Permanent employment
Contract work
For contractors
Monday to Friday
Shift work
Afternoon shift
MB Aerospace East Granby
East Granby, CT
a month ago
CNC MACHINISTS - FULL TIME
...translating engineering designs into optimized CNC programs that drive precision, efficiency... ...CNC programs for complex multi-axis milling operations Select tooling, cutting... ...and processes as needed Collaborate with machinists, engineers, and quality teams Ensure compliance...
Suggested
Full time
Shift work
Day shift
Kinetic Engine Systems
Westfield, MA
3 days ago
CNC Milling Machinist
$24 - $37 per hour
...Job Title: CNC Milling Machinist, 2nd Shift Location: East Granby, CT Pay Rate: $24 - $37/hr + 15% Shift Differential (DoE) Job Type: Direct Hire Start Date: ASAP Schedule: Schedule: 2nd Shift (Mon-Fri 3:30pm-12:00am) Keywords: #Aerospace #Machinist #Milling...
Permanent employment
Contract work
Temporary work
Local area
Immediate start
Worldwide
Shift work
Afternoon shift
Belcan
East Granby, CT
4 days ago
CNC Milling Machinist (2nd Shift)
$24 - $37 per hour
Description Job Title: CNC Milling Machinist (2nd Shift) Locations: East Granby, CT Pay: $24 - $37 (DoE) (Plus 15% Differential) Zip Code: 06026 Start Date: ASAP Keywords: #CNC Milling Machinist #MachinistJobs Position Details Hours: 3:30pm-12:00am Mon-Fri Your Expertise...
Contract work
Temporary work
Local area
Immediate start
Afternoon shift
Belcan Corporation
Granby, CT
3 days ago
CNC Machinist - Turning/Milling (contract)
$35 - $45 per hour
...CNC Machinist – Turning/Milling (contract) Job Number: 365227 Category: Machinist/CNC Operator Description: Job Title: CNC Machinist - Turning/Milling (contract) Location: East Granby, CT Pay Rate: $35 - $45/hr Job Type: Contract Zip Code: 06026 Start...
Permanent employment
Contract work
Temporary work
Local area
Immediate start
Worldwide
Day shift
Afternoon shift
Belcan
East Granby, CT
1 day ago
Aerospace CNC Milling Machinist — Fanuc, GD&T, SPC
Barnes Aerospace, Inc. in Granby, Connecticut is looking for an experienced machinist. The ideal candidate has 3-5 years of aerospace machining experience, knowledge of CNC Devlieg Milling Machines, and familiarity with Fanuc controls. Responsibilities include operating...
Barnes Aerospace, Inc.
Granby, CT
1 day ago
CNC Machinist: Turning & Milling (Contract, Onsite)
$35 - $45 per hour
Belcan Corporation is looking for a CNC Machinist specializing in Turning/Milling for a contract position in East Granby, CT. You will set up and operate complex CNC milling jobs while ensuring adherance to precision specifications and safety standards. The ideal candidate...
Contract work
Belcan Corporation
Granby, CT
4 days ago
CNC Milling Machinist - 2nd Shift (Devlieg / Multi-Axis)
$26 - $38 per hour
...Experience Level: Mid-Senior (3-5+ years CNC machining experience) Why This Role Exists... ...and repair programs requiring precision milling across both production and NPI (New... ...Willingness to learn CNC programming Why Machinists Like Working Here Stable aerospace manufacturing...
Hourly pay
Full time
Monday to Friday
Flexible hours
Shift work
Afternoon shift
Barnes Aerospace
East Granby, CT
5 days ago
Aerospace CNC Milling Machinist — 2nd Shift, High-Precision
$24 - $37 per hour
Belcan is seeking a CNC Milling Machinist for the 2nd shift in East Granby, CT. This direct hire position offers a pay rate between $24 - $37/hr plus a 15% shift differential depending on experience. Responsibilities include setting up and operating complex milling operations...
Shift work
Afternoon shift
Belcan
East Granby, CT
3 days ago
CNC Milling Machinist (1st Shift)
...CNC Milling Machinist (1st Shift) Job Category: Production Full-Time On-site Barnes Aerospace East Granby 7 Connecticut South Drive East Granby, CT 06026, USA Description Position Details: 1st shift 7:00am - 3:30pm Your Expertise: ~3-5 years of...
Permanent employment
Full time
Immediate start
Day shift
Barnes
East Granby, CT
4 days ago
CNC Milling Machinist - 1st & 2nd Shift (3, 4, 5-Axis)
$26 - $38 per hour
...shift Overtime: Available Experience Level: Mid-Senior (3+ years CNC milling experience) --- Why This Role Exists This role exists to... ...with exotic materials Familiarity with Fanuc controls --- Why Machinists Like Working Here Machinists choose Barnes Aerospace because:...
Hourly pay
Full time
Monday to Friday
Flexible hours
Shift work
Day shift
Afternoon shift
Barnes Aerospace
East Granby, CT
5 days ago
CNC Milling Lathe Machinist | 2nd Shift
$25 - $32 per hour
...Job Title: CNC Lathe Machinist Shift: 2nd | Hours: 3 PM - 11 PM Employment Type: Full-Time | Mode: Direct Placement Pay Scale: $25 - $32/hr | Industry: Manufacturing Job Overview: Our client is seeking an experienced CNC Lathe Machinist with a strong...
Full time
Shift work
Afternoon shift
Crescent City Recruitment Group
Springfield, MA
5 days ago
CNC Machinist
...Millennium Power Service is looking for an experienced CNC Machinist to join our growing team in Westfield, MA. This is an excellent opportunity... ...and CNC machining equipment including: Manual lathes and mills PROTO TRAK lathes and milling machines Bridgeport...
Hourly pay
Temporary work
Monday to Friday
Weekend work
Ovation Holdings, Inc.
Westfield, MA
5 days ago
Overnight CNC Machinist (Aerospace)
...Available Pay: Competitive Starting Pay (DOE) Are you a skilled CNC Machinist who takes pride in precision work? Or someone with machining... ...What You’ll Do Set up and operate 3-Axis or 4-Axis CNC Milling Machines Work with Fanuc Controls, including understanding...
Full time
Night shift
Masis Professional Group
Springfield, MA
2 days ago
CNC Programmer - Aerospace (NX CAM | Milling & Turning)
$90k - $110k
...Monday–Friday Overtime: As needed Experience Level: Senior (5+ years CNC programming experience) Work Authorization: Must be authorized... ..., and optimize CNC programs for turning, VTL, and multi-axis milling operations Lead programming efforts in collaboration with Repair...
Hourly pay
Daily paid
Full time
Contract work
Monday to Friday
Flexible hours
Shift work
Day shift
Barnes Aerospace
East Granby, CT
3 days ago
Senior CNC Programmer - Aerospace 5-Axis Milling/NX CAM
Barnes Group Inc. in East Granby, Connecticut is seeking an experienced CNC Programmer to lead turning and milling programming development in collaboration with engineers. The ideal candidate should have at least five years of experience and be proficient in CAM programming...
Barnes Group Inc.
East Granby, CT
4 days ago
CNC Programmer - Milling
...Job Description Job Position Summary: CNC Programmer is responsible to create computer... ...(CNC) programs to be used for automating machinists’ tools by using computer generated... ...related field preferred Experience with CNC Mill multi-axis programming. CAD/CAM...
Work at office
Kinetic Engine Systems
Westfield, MA
3 days ago
CNC Machinists- Multiple Shifts & Locations
...and take your career to new heights with Barnes Aerospace! Now Hiring: CNC Machinists Multiple Locations & Shifts | Immediate Openings We have several immediate openings for CNC Milling Machinists across multiple locations. Relocation assistance may be available...
Permanent employment
Immediate start
Relocation package
Shift work
Barnes Group Inc.
East Granby, CT
a month ago
CNC Machinist
...Description EBAD seeks a qualified candidate for the position CNC Machinist, reporting to the Machine Shop Supervisor. The position is... ...precision-machined parts by setting up and operating CNC and manual mills and lathes. Equipment is Haas UMC-750 CNC 5-Axis Mill,...
Ensign-Bickford Industries
Simsbury, CT
3 days ago
CNC Machinists/Programmers - 1st, 2nd, & 3rd shift
...CNC Machinist Springfield, Massachusetts, United States About the Job CNC Machinist We are seeking skilled CNC Machinists to join... ...Setting up, operating, and maintaining CNC machines (lathes, mills, etc.). Reading and interpreting complex blueprints, engineering...
Shift work
Night shift
Day shift
Afternoon shift
Manufacturing Company
Springfield, MA
1 day ago
CNC Programmers - Manufacturing
$30 - $33 per hour
...CNC Machinist West Springfield, Massachusetts, United States About the Job We are immediately hiring a CNC Machinist for a direct... ...-hire position, specializing in operating and setting up Haas Milling machines. The ideal candidate is a dedicated, detail-oriented...
Full time
Immediate start
Monday to Friday
Shift work
Manufacturing Company
West Springfield, MA
4 days ago
CNC Machinist - Advanced Rotary Engines
...CNC Machinist - Advanced Rotary Engines Location: Suffield, CT Employment Type: Hourly About LiquidPiston: LiquidPiston is pioneering... ..., optimize, and maintain CNC programs for complex multi-axis milling and turning operations. Set up and operate CNC mills and...
Hourly pay
LiquidPiston Inc
Suffield, CT
2 days ago
CNC Machinist
$49.92k - $72.8k
...Job Title: CNC Machinist Job Description We are seeking skilled CNC Machinists to join our team, serving the aerospace and medical industries... ...Perform set-ups and operate CNC machines, including mills and lathes. Troubleshoot machinery issues and ensure efficient...
Weekly pay
Permanent employment
Temporary work
Work at office
Monday to Friday
Night shift
Day shift
Aerotek
Agawam, MA
5 days ago
CNC Machinists- Multiple Shifts & Locations
...CNC Machinists- Multiple Shifts & Locations Barnes Aerospace offers competitive wages, shift differentials, 401k savings plan, paid time... ...Openings We have several immediate openings for CNC Milling Machinists across multiple locations. Relocation assistance may...
Permanent employment
Immediate start
Relocation package
Shift work
Barnes Inc.
East Granby, CT
2 days ago
5-Axis CNC Machinist - Precision Aerospace Parts
...defense technology provider located in Simsbury, CT, is seeking a CNC Machinist with over 5 years of experience operating and setting up CNC... ...fabricating precision-machined parts, operating 5-axis mills, and ensuring quality through inspection. Candidates must possess...
Ensign-Bickford Aerospace & Defense Company (EBAD)
Simsbury, CT
1 day ago
CNC Programmers- 2nd Shift
...Position: CNC Swiss Lathe Machinists Shift: 1st Type: Full-Time Mode: Temp to Hire /DP Industry: Manufacturing Our client is looking for a responsible CNC Swiss Lathe Machinists and is a DP position with our key manufacturing client...
Full time
Temporary work
Shift work
Afternoon shift
Springfield, MA
5 days ago
CNC Programmer
...Job Description Core Responsibilities: Lead turning and milling programming development, instruction, and debugging tasks in collaboration... ...more years direct experience in lathe, VTL, 3/4/5 axis milling CNC programming. Experience processing nickel, cobalt, and...
Barnes Group Inc.
East Granby, CT
a month ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to CNC Machinist - Milling. Be the first to apply!