Wireless Engineer w Travel - SECRET Clearance

DescriptionActioNet is seeking a Wireless Engineer with Travel Overview: The Wireless Engineer designs, installs, optimizes, and maintains mobile broadband, cellular, and WLAN systems across enterprise Base Area Networks (BAN). This role supports both legacy and modernized wireless infrastructure, ensuring maximum coverage, minimal interference, and compliance with Air Force and DoW technical, security, and spectrum standards. The Wireless Engineer contributes to system design, RF planning, troubleshooting, site surveys, documentation, and operational sustainment while collaborating with network engineering, cybersecurity, and base communications teams. The Wireless Engineer supports the design, deployment, and optimization of 4G LTE and 5G NR (New Radio) wireless solutions across enterprise and mission environments, ensuring resilient broadband connectivity and low‑latency performance for critical applications. The Wireless Engineer applies knowledge of RAN architecture, mobile core functions, and backhaul integration to ensure seamless mobility and high‑availability wireless service.Location: Remote with 15% Travel CONUS, and may need to travel OCONUS, as needed***Secret Clearance Required***Salary range for this position is up to $250,000, depending on qualifications, including relevant certifications, education, years of experience, and demonstrated experience supporting Federal Government programs within the field. Candidates with specialized expertise, industry-recognized certifications, and strong Federal contracting experience may be considered at the higher end of the range.Key ResponsibilitiesWireless and Broadband System EngineeringAssist with the design of mobile broadband/cellular solutions across BAN environments, including antennas, power, backhaul, and spectrum utilizationDesign enterprise WLAN infrastructure using advanced RF principles, including predictive and on‑site RF modeling, heat mapping, and site surveysEnsure WLAN design follows DoD/DAF RF, HERO, HERP, and HERF safety standards and spectrum certification requirementsSupport green‑field wireless designs—no legacy wireless reuse—per modernized network requirementsEvaluate RF propagation characteristics, building materials, multipath conditions, and flight line/industrial environment constraintsInstallation, Configuration, and IntegrationInstall, configure, and test broadband, WLAN, and cellular systems in accordance with engineering design packagesEnsure compliance with OEM specifications, DoD STIGs, NIAP, FIPS, and applicable cybersecurity guidelinesCoordinate with Network Engineers to optimize system integration, traffic flows, bandwidth usage, and performanceSupport installation of wireless infrastructure across operational facilities, maintenance hangars, warehouses, munitions areas, and flight line operations areasSite Surveys and Spectrum ManagementConduct predictive, passive, active, and verification wireless site surveys (indoor and outdoor)Document survey results, including RF readings, spectrum analysis, heat maps, interference sources, and channel planningEnsure compliance with AFI 17‑220 spectrum processes, including SCG data collection, device certification inputs, and safe RF emissions near ordnance, fuels, and personnelIdentify and document OSP/ISP constraints, power/grounding requirements, and environmental hazards that affect wireless deploymentOperations, Sustainment, and TroubleshootingMonitor wireless system performance, availability, and security posture using approved NMS toolsDiagnose and resolve wireless issues involving RF interference, connectivity, hardware failures, authentication, or configuration conflictsPerform preventive maintenance, firmware updates, vulnerability mitigation, and configuration optimizationSupport Tier 2/3 wireless troubleshooting as part of shared operational responsibilities with the Base Communications SquadronDocumentation and ComplianceDevelop and maintain technical documentation including design diagrams, RF heat maps, configuration files, and installation recordsEnsure wireless systems meet DoD, DAF, STIG, RMF, TEMPEST, and cybersecurity standardsRecord installation, maintenance, and repair actions for operational continuity and future referenceProduce required documentation deliverables, such as Wi‑Fi heat maps, wireless installation descriptions, and RF assessments for transition packages5G/LTE System EngineeringDesigns and implements LTE and 5G RAN components, including small cells, macro cells, antennas, eNodeB/gNodeB platforms, and associated transport networks.Performs RF engineering tasks for 5G and LTE systems, including waveform analysis, MIMO/Antenna configuration, carrier aggregation, and spectrum allocation.Supports integration of 5G Standalone (SA) and Non‑Standalone (NSA) architectures into existing enterprise networks.Evaluates and configures 5G core functions such as AMF, SMF, UPF, AUSF, NRF, and interfaces (N1–N4, N6–N14, etc.) for mission needs.Optimizes throughput, coverage, and reliability using drive testing, RF measurements, SINR/RSRP/RSRQ analysis, and spectrum monitoring.5G/LTE Operations and TestingInstalls, configures, and validates LTE and 5G radios, including DAS systems, small cells, and private cellular networks.Performs acceptance testing using tools such as spectrum analyzers, RF scanners, UE testing platforms, and OEM management systems.Conducts testing of new cellular technologies, including network slicing, edge computing capabilities (MEC), and 5G security features before deployment.Troubleshoots cellular service issues involving signaling failures, handover performance, RF interference, mobility challenges, and core‑radio integration.Collaboration and ComplianceWorks with spectrum management authorities to ensure proper frequency licensing and compliance for LTE and 5G deployments.Ensures 5G/LTE systems comply with DoD/DAF cybersecurity requirements, including STIG, RMF, FIPS, and Zero‑Trust Architecture considerations.Required QualificationsEducationBachelor’s degree in a technical discipline, such as computer science, engineering, information technology, cybersecurity, data science, or related ORHigh school diploma or associate degree with 7 years performing as a Broadband/Wireless Engineer on large, complex networks.Experience5 years of experience with broadband, wireless, or enterprise network engineering.Demonstrated experience in WLAN RF design, enterprise wireless planning, and advanced wireless troubleshootingExperience designing and supporting TCP/IP networks, including switching, routing, QoS, NAC, NMS, and OSP/ISP distribution systemsExperience with LTE EPC and 5G Core (5GC) architectures, protocols (S1/X2, NG, N2/N3), and mobility operationsProficiency with RF and cellular tools such as CellAdvisor, TEMS, Nemo, PCTEL scanners, or similarWorking knowledge of network slicing, beamforming, MIMO technologies, and private cellular networks (CBRS/OnGo)Technical SkillsProficient in broadband and wireless technologies, including 802.11 standards, RF engineering, spectrum analysis, and wireless securityStrong understanding of network protocols, infrastructure, and enterprise architectureSkilled in MS Office Suite, Teams, and SharePointExperience with wireless design tools (e.g., Ekahau, AirMagnet) and network performance monitoring systemsFamiliarity with DoD cybersecurity controls, STIGs, ACAS scanning, and RMF processesCertificationsCCNA, JNCIA, or equivalentCompTIA Security+ (required for DoD 8140 compliance)Additional wireless certifications, such as CWNA or CWDP, are desirablePreferred Certifications3GPP 5G/LTE certifications (Nokia, Ericsson, Cisco, Samsung, Verizon, AT&T training)CBRS Certified Professional Installer (CPI)Certified Wireless Specialist – Cellular (CWS, CWSA)CBRS Certified Professional Installer (CPI) certification Ekahau Certified Survey Engineer (ECSE) or equivalent enterprise RF design certificationClearanceActive Secret Clearance requiredDesired AttributesExcellent analytical and problem‑solving skills to diagnose and resolve wireless/system faults quickly and efficientlyStrong communication skills for coordination with engineering teams, base communications units, and operational leadershipAbility to work in high‑security, mission‑critical environments with strict standards and oversightDetail‑oriented, with strong documentation and compliance discipline About ActioNetActioNet is a CMMI-DEV Level 4, CMMI-SVC Level 4, ISO 20000, ISO 27001, ISO 9001, HDI-certified, woman-owned IT solutions provider with 25+ years of stellar performance. Our expertise spans Agile Software Engineering, Cloud Solutions, Cybersecurity, and IT Managed Services.With a 98% customer retention rate, ActioNet is proud to be named a Top Workplace for 13 consecutive years (2014–2026).Why ActioNet?At ActioNet, our Passion for Quality is at the heart of everything we do:Commitment to Employees: A great place to work with ongoing investment in our people.Commitment to Customers: Driving and sustaining service delivery excellence.Commitment to Community: Giving back and building a better world for future generations.What’s in It for You?Medical, Dental, and Vision Insurance401(k) Savings PlanPaid Time Off (PTO) & 11 Paid HolidaysLife and Disability InsuranceEducation and Professional TrainingFlexible Spending Accounts (FSA)Employee Recognition and Referral ProgramsEmployee Assistance & Identity Theft ProtectionActioNet is an equal opportunity employer and values diversity. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.