Lo Drill Operator
Quanta Services
About Us Crux Subsurface, a subsidiary of Quanta Services, Inc. (NYSE: PWR), is a geotechnical drilling company merging innovation with experience to consistently provide accurate data and efficient, constructible solutions to projects of any size. Our multidisciplinary team combines the expertise of structural and geotechnical engineers with experienced drillers, construction managers, geologists, and quality management specialists. About this Role The Lo Drill Operator is responsible for safely and efficiently operating lo-drill equipment to perform drilling activities for construction and utility projects. Work is completed based on project requirements, layout, and supervisor direction. Responsibilities include equipment operation, basic maintenance, required documentation, and adherence to Crux Subsurface and IBEW safety and work practices. Work is performed in remote and demanding field environments. What You'll Do
We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.
- Operate lo-drill equipment to complete drilling tasks according to project requirements and supervisor direction.
- Perform drill setup, site layout, equipment positioning, alignment checks, and drilling to required depths or diameters.
- Install materials or components as required for the assigned drilling scope (excluding grout-based foundation systems).
- Conduct daily equipment inspections, perform routine maintenance, and communicate repair needs to supervision.
- Ensure equipment is operated only by qualified and authorized personnel.
- Complete daily documentation including drill reports, timesheets, borehole logs, equipment inspection forms, and tailboards.
- Operate ancillary equipment such as telehandlers, Morooka carriers, mini excavators, crew trucks, and cranes (as applicable).
- Follow Crux safety programs, including PPE requirements, JSAs, tailboards, and project-specific safety plans.
- Maintain a clean and organized drill site and restore/exit locations to client expectations.
- Perform work in compliance with IBEW agreements, practices, and jurisdictional requirements.
- Perform additional duties as assigned within the scope of drilling operations.
- Valid, unrestricted Driver License with acceptable driving record, Class A CDL preferred.
- OSHA-10.
- First Aid/CPR.
- NCCCO certification or equivelent preferred.
We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.
Vacancy posted 5 days ago
Similar jobs that could be interesting for youBased on the Lo Drill Operator in East Farms, WA vacancy
- ...subsidiary of Quanta Services, Inc. (NYSE: PWR), is a geotechnical drilling company merging innovation with experience to consistently... ...project requirements, and Crux Subsurface procedures. This position operates specialized drilling equipment, completes required...SuggestedLocal areaRemote work
$45 - $60 per hour
...subsidiary of Quanta Services, Inc. (NYSE: PWR), is a geotechnical drilling company merging innovation with experience to consistently... ...(SPT), and other subsurface investigation methods Set up, operate, and maintain drilling equipment in the field Document drilling...SuggestedLocal areaRemote work- ...Hayden, Idaho If being a part of a world-class organization that operates in some of the most advanced technological environments around... ...Locator is responsible for accurately locating and guiding the drill head during horizontal directional drilling (HDD) operations...SuggestedFull timeImmediate startNight shift
- ...running Haas CNC Mills a plus. Program using Mastercam software a plus. Hand edit M and G code at the machine. Program and operate Wire EDM and sinker. Program swiss mills with Mastercam software. Timing, sharpening and adjustment of dies. SUPERVISORY...SuggestedFull time
$45 per hour
...flexibility with strong earning potential, we’d love to connect. Franchise Disclosure This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of...SuggestedFull timePart timeApprenticeshipLocal areaWork from homeFlexible hours$20 - $29 per hour
...Entry Level CNC Operator - Weekday Shifts CNCIDAHO - Post Falls, Idaho We're looking for Entry Level CNC Operators to join our week-day shifts! Why MetalQuest? Build a Career, Not Just a Job At MetalQuest, we combine cutting-edge equipment with a supportive...Permanent employmentShift workWeekend workDay shiftAfternoon shiftWeekday work- Description Summary Plans and erects metal framing to create walls, ceilings, soffits, shafts, and movable partitions to attach finish substrate in commercial and industrial buildings by performing the following duties. Essential Duties and Responsibilities includes...Local areaShift work
- ...Setup Machinist. EXPECTATIONS: This position will require a safety conscious, meticulous, and detail oriented person to operate, set up, and program CNC machines. Must be able to read blueprints/engineering drawings. Must be able to use precision tools...Full time
- Description The Paint Prep Technician position is responsible for preparing transformer units for paint by cleaning, applying filler, taping, and sanding. Compliance with all safety requirements, product quality standards and company policies are essential functions...Immediate startFlexible hours
- ...today! Summary of Position The primary purpose of this position is to assure the proper washing and drying of laundry. This includes operating washing and drying equipment, loading and unloading from machines, measuring and administering cleaning agents to laundry per...Full timeSeasonal workShift work
- ...Hayden, ID If being a part of a world-class organization that operates in some of the most advanced technological environments around... ...: We are seeking an experienced Horizontal Directional Drill Locator to join our team to locate for our drill rigs. The HDD...Full timeImmediate start
$32.5 per hour
...bumps of fifty (40) cents per hour every six months until five years of employment. COLA increases begin in 2027. Job duties include operation of tractor trailer units and Moffett forklift. Position will also include cross training for operation of roll-off style refuse...Hourly payFull timeWork at officeLocal area- ...are an Equal Opportunity Employer and participate in E-Verify. About this Role FiberTel is looking for a Travel CDLEquipment Operator for our Portland location. This is a travel position with job sites in OR, WA, and ID. The Travel CDL Equipment Operator...Hourly payDaily paidFull timeTemporary workLocal areaWork from homeFlexible hours
- ...Travel Cdl Equipment Operator FiberTel is looking for a Travel CDL Equipment Operator for our Portland location. This is a travel position with job sites in OR, WA, and ID. The Travel CDL Equipment Operator will be responsible for safely and skillfully operating...Hourly payDaily paidFull timeTemporary workLocal areaFlexible hours
- ...have a passion for cars. While Yard Attendants always focus on safety first, they understand the importance of a quick and smooth operation. As the frontline of IAA, this critical role enjoys learning new ways to use technology and being at the forefront of the auction...Full time
$40 - $60 per hour
...assigned by management or ownership. General Job Requirements: Good knowledge of plumbing and mechanical code required. Operating knowledge of Microsoft Office Software and work proficiency with computers, iPads, and hand-held devices such as smartphones,...For contractorsWork at officeFlexible hours$27 - $35 per hour
...and specifications to set up and edit CNC machines and/or manual machines, such as lathes and mills, to very close tolerances and to operate these machines for precision work using best and safe practices. Primary Job Responsibilities ~Setup and operate CNC and/or...Hourly payLocal areaMonday to ThursdayAfternoon shift$21 - $28 per hour
...expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis...Weekly payDaily paidFull timeContract workTemporary workImmediate startDay shift$22 - $25 per hour
...paid time off. This position pays between $22 and $25 per hour. Position Overview This position is responsible to provide operational support in reconstruction efforts for clients. Qualified candidates must be well grounded in fundamentals of carpentry and tool usage...Hourly payFor subcontractorNight shiftWeekend work$17.25 - $18.25 per hour
...in aerospace and other high-performance applications. You will operate specialized machinery, perform basic inspections, and handle light... ...and a variety of demanding applications, including lasers, drilling equipment, and environments with extreme temperature, pressure,...Weekly payContract workTemporary workShift work$17.25 - $18.25 per hour
...Fridays Off!) Work Environment: Clean, well-lit facility with light-duty work and growth opportunities Job Responsibilities: Operate roll formers and polishing lathes to manufacture metal seals used in aerospace applications Load sheet metal bands onto roll-...Weekly payContract workTemporary workImmediate start$17.15 - $18.15 per hour
Job Description - Overview Hobby Lobby is seeking organized, customer service oriented people to join our team as a Framer. We need enthusiastic individuals who are motivated, responsible, and have the drive to make the most of a career with us. We are an EXCITING,...Hourly payFull timeSeasonal workFlexible hours$17.5 - $20 per hour
...Summary The CNC Router Operator is responsible for setting-up, programming and operating a CNC Router according to instructions to produce parts as specified while maintaining safety and quality requirements. Essential Duties and Responsibilities # Sets...Work at officeShift work$5,000 per month
Experienced Drivers Wanted We're looking for experienced drivers to join our team and drive our expanding fleet of NEW trucks. Top pay, great benefits, and year-round work available. Job Purpose Transport raw materials to and from pit locations and job sites. ...Immediate startShift work- Employee Type FT Non-Exempt Contact information Name Jennifer Phone (***) ***-**** Description Since 1933, StanCraft has been building some of the world's most iconic wooden boats. Combining traditional craftsmanship with modern innovation, our team creates custom vessels...
- ThePaint Prep Technicianpositionis responsible forpreparing transformer units for paint by cleaning, applying filler, taping, and sanding. Compliance with all safety requirements, product qualitystandardsand company policies are essential functions of this role. Review...
$19.5 - $32.5 per hour
Hourly Wage: $19.5 - $32.5 per/hour *The actual hourly rate will equal or exceed the required minimum wage applicable to the job location. Additional compensation includes annual or quarterly performance incentives. Additional compensation in the form of premiums...Hourly payMinimum wageFull timeTemporary workPart timeShift workDay shift- ...subsidized bus passes, bike commuting rewards The CNC Lathe Machinist is responsible for following prescribed standards of CNC operations, meeting cycle times, promoting on-time delivery through their performance efforts, demonstrating knowledge and application of...Shift workDay shiftAfternoon shift
- ...experienced CNC machinist to join our industrial manufacturing team. As a CNC machinist , you will be responsible for operating and maintaining computer numerical control (CNC) machines to produce precision parts and components. You will work with a...
$20.5 per hour
...Job Description Job Description Drive the Flow of Success – Join PDS Tech and become a Machine Operator and Make an Impact in Spokane, WA! Summary of the Role: We are seeking a Production Machine Operator to set up and operate machinery in a fast-paced...Hourly payPermanent employmentTemporary workLocal areaShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Lo Drill Operator. Be the first to apply!



