Assembler
Full-time
IHI Connectors
Job description
This is a 1st shift position. 8:00 am - 4:30 pm .
Ø Must be able to perform repetitive assembly work with an average of 1,000 motion cycles per hour
Ø Must be able to lift parts and components from the floor to the work table, and from the work table to the next processing area - lifting 35 pounds required frequently, 40 pounds occasionally
Ø Assemble screws and other components into electrical junction blocks, using the automatic screw table and various hand tools.
Ø Inspect parts for quality while assembling, per written and verbal instructions
Ø Maintain production levels over the minimum wage level
Ø Box parts as necessary, per a written instructions
Ø Operate a counting scale
Ø Assemble correct components into parts per verbal instructions or job sheet
Ø Set up and adjust automatic screw table
Ø Maintain automatic screw table machinery – check and add hydraulic oil, clean machine, change bearings, couplings, and drivers
Any other assigned task as requested by the supervisor, or acting supervisor, within the training level and physical capabilities of the employee
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Assembler in Mentor, OH vacancy
- ...Job Description Finding a job that fits your lifestyle isn't always easy. That's where Kelly comes in. We're seeking a Precision Assembler to work at a premier client in Mentor OH 44060. Job Title: Precision Assembler Job Duration: 6 Months on w2 Pay rate: $1...SuggestedTemporary workLocal areaMonday to FridayShift work
Kelly Services
Mentor, OH13 days ago $18.25 per hour
...those who want to keep growing, learning, and evolving. We at Kelly® hear you, and we’re here for you! We’re seeking Precision Assemblers to work at a premier manufacturing client in Mentor, OH. Sound good? Take a closer look below. You owe it to yourself to consider...SuggestedHourly payTemporary workLocal areaMonday to FridayNight shiftAfternoon shiftKelly Services
Mentor, OH26 days ago$19.52 - $25.26 per hour
...Senior AssemblerThe Senior Assembler will perform assembly work utilizing lean principles (one-piece flow) to produce VHP capital products in a controlled work environment. Assemble sub-assemblies and capital equipment to be moved to test for release to the Customer. Build...SuggestedTemporary workLocal areaFlexible hoursSTERIS
Mentor, OH4 days ago$16 per hour
...Job Description Job Description Production Assembl er | $16/hr. | 6:00am – 2:30pm Monday – Friday What Matters Most Competitive pay of $16 per hour Schedule: Monday through Friday, 6:00am – 2:30pm Location: Mentor, OH Full-time, entry-level opportunity...SuggestedHourly payFull timeMonday to FridayThe Reserves Network Inc
Mentor, OH9 days ago- Job TitlePer hourBonus potential of #####/mo. (Gross) – to receive the bonus the temp must work every scheduled work day of the month for min 8 hour period. Applies throughout the employment or not to exceed 1 year, whichever comes first. Individual will repair and overhaul...SuggestedTemporary work
Trice Healthcare
Euclid, OH2 days ago $40k - $60k
Job Description Job Description Experienced stone fabricator/installer able to polish and install stone like marble, granite, quartz, etc. Qualifications: ~ High school diploma or equivalent. ~3 years minimum experience with installing and fabricating natural...Great Lakes Granite Works
Mentor, OH25 days ago$37.77 - $44.06 per hour
Job Description Parma Metal Center General Motors has needs for qualified Industrial Electrician Journeypersons. Working under minimal supervision, the skilled trades Electrician Journeyperson is responsible for layout, installation, repair and preventative maintenance...Hourly payApprenticeshipH1bLocal areaWork from homeRelocationFlexible hoursShift workNight shiftWeekend workDay shiftAfternoon shiftGeneral Motors
Grand River, OH4 days ago- ...Job Description Job Description Mechanical Assembler Overview: We are seeking an experienced Mechanical Assembler to join our team. We seek candidates who are mechanically-inclined and have experience with assembly work. This job will require the use of hand/...Temporary workShift work
Ericson Manufacturing Co
Willoughby, OH26 days ago - Job Description Job Description The Welding Fabricator will be responsible for maintenance and repair as well as new machinery set ups as required in an industrial setting. The ideal candidate will be proficient in the following:MIG and STICK weldingOverhead and vertical...
American Metal Stamping Company LLC
Euclid, OH23 days ago - ...Electric, a global leader in welding, cutting, and automation that has been a staple in Northeast Ohio for over 126 years! As an Assembler, you will help deliver world-class products to customers that have trusted the Lincoln Electric brand for decades. By performing...Local area
Lincoln Electric
Euclid, OH2 days ago - Wax Sub Assembly (2nd Shift)Job Title: Wax Sub Assembly (2nd Shift)Job Description: This is the main job post content. It includes detailed information about the role, responsibilities, and requirements for the Wax Sub Assembly position on the 2nd shift.Afternoon shift
Precision Castparts Corp
Mentor, OH4 days ago $16 per hour
...NOW HIRING START ASAP Minutemen Staffing Mentor, OH We have IMMEDIATE openings on 1st & 2nd shift Assembly Operator $16/hr ???? Quality Inspector $19/hr ???? Housekeeper $16/hr ???? Mold Machine Setup / Process Tech $19/hr ???? 2nd Shift Mold Setup / Process Tech $19/...Weekly payLocal areaImmediate startShift workDay shiftAfternoon shiftMinute Men Staffing Services
Painesville, OH2 days ago$43.65 per hour
...milling, turning, EDM, and grinding equipment. Location: On-site in Euclid, Ohio Your Day to Day as a Bearing Cell Operator: Generate, assemble and inspect bearings and bearing components. Verify and inspect all features using appropriate inspection methods. Ability to read...Hourly payFlexible hoursShift workNight shiftAfternoon shiftBWXT Technologies
Euclid, OH3 days ago- ...Job TitleAssemble machine bases, frames, guards, and sub-assemblies for paper converting and packaging equipment.Install electrical components such as motors, sensors, photo eyes, drives, servo systems, PLC panels, HMI units, relays, and safety devices.Lay out and route...Temporary workImmediate start
Ranpak
Painesville, OH20 hours ago - ...Halma, a FTSE 100 company. To support our ongoing growth, we are looking for you!Key Responsibilities:Perform incoming inspection, assembly, final testing, troubleshooting, and data collection for diagnostic imaging systems and related electronic instrumentation....
Halma plc
Mentor, OH22 hours ago - ...of the journey. Role Overview and Responsibilities Introduction: Responsible for prep, coat and un-prep of circuit board assemblies that require conformal coating. Key Responsibilities Capable of identifying type of conformal coating, cure schedule and...Permanent employmentImmediate startDay shiftAfternoon shift
Tt Electronics Plc
Perry, OH4 days ago $16 per hour
MUM Industries is seeking an Entry Level 3rd Shift Plastic Process Line Operator at our Mentor, OH facility. The role focuses on operating the automatic inserting machine, loading products, and ensuring correct materials are used according to the BOM and routers. You will...Hourly payMonday to ThursdayNight shift$16 per hour
Job DetailsLevel: EntryJob Location: Headquarters - Mentor, OH 44060Position Type: Full TimeSalary Range: $16.00 HourlyJob Category: Manufacturing3RD SHIFT PLASTIC PROCESS LINE OPERATOR DETAILS BELOW. HOURS MONDAY THROUGH THURSDAY 7:30PM-5:00AM. STARTING PAY $16.00/HR Responsibilities...Monday to ThursdayShift workNight shift$22 - $26 per hour
Job Description Job Description Join our team at Air Technical Industries, where your skills as an Industrial Welder-Fitter will directly contribute to enhancing workplace safety and ergonomics. You'll be part of a team that transforms raw materials into a variety ...Hourly payPermanent employmentFull timeAir Technical Industries
Mentor, OH14 days ago- Job Description Job Description A Robotics Technician is responsible for maintaining, troubleshooting, and repairing robotic systems to ensure optimal performance in various industrial and commercial applications. This role demands technical expertise and the ability...
Just In Time Staffing
Mentor, OH2 days ago - Job Description Job Description Benefits: Flexible schedule Opportunity for advancement Benefits/Perks Flexible Schedule Competitive Pay Great opportunity for supplemental income Job Summary We are seeking a skilled Welder to join our team....Extra incomePart timeFlexible hours
E MANUFACTURING CO INC
Mentor, OH24 days ago - ...Job Description Job Description Stringlight Assembler Willoughby, OH, US We are currently searching for Stringlight Assemblers to join our team! The Company: Ericson Manufacturing Company engineers and manufactures temporary power, lighting and electrical safety...Temporary workShift work
Ericson Manufacturing Co
Willoughby, OH26 days ago $16 - $18.25 per hour
...Precision Assembler JOB-10047381 Anticipated Start Date August 31, 2026 Location Mentor, OH Type of Employment Contract Hire Employer Info As a global leader in the healthcare space providing products and services that emphasize...Hourly payFull timeContract workMonday to FridayAfternoon shift$20 - $24 per hour
...Machine Builder / Mechanical Assembler Location: Lake County, OH Shift: 1st Shift | Monday-Friday | 7:00 AM - 3:30 PM (30-minute unpaid lunch) Pay: $20.00 - $24.00 per hour, based on experience Build Custom Machinery. Work with Your Hands. Take Pride in...Hourly payApprenticeshipMonday to FridayShift workDay shiftPPS-HPS
Mentor, OH2 days ago- The Low Voltage Cable Technician will assist with the installation, routing, and support of low-voltage cabling systems at customer sites throughout the United States. This role requires extensive travel over the first two months of the project and the ability to work ...ApprenticeshipShift work
Insight Global
Mentor, OH3 days ago - ...QED Electronics AssemblerAn Electronics Assembler performs assembly and repairs on electronic and mechanical assemblies by following instructions and using provided tools, equipment and programs, to help the plant team meet its goals.Essential duties and responsibilities...Trial periodDay shift
Quality Electrodynamics (QED)
Mayfield Village, OH4 days ago - PPS-HPS in Mentor, OH is looking for a skilled Machine Builder / Mechanical Assembler to join their manufacturing team. This role involves building custom machinery from blueprints and using various fabrication techniques. The ideal candidate will have strong mechanical...
$24 - $28 per hour
Job Description Job Description Nearly 40 years and still growing, this safety minded, fast growing provider of high-quality custom welding, fabrication, and maintenance solutions, is currently seeking multiple experienced shop welders to join the team. [Duties] ...Monday to FridayPPS-HPS
Mentor, OH4 days ago$32 per hour
...Repairs equipment by using welding techniques and appropriate welding equipment. Clean and prepare surfaces to be welded. Sets up, assembles, and tacks weld parts. Build up worn or defective surfaces. Use burning equipment to dismantle assemblies and to cut...Buyers Products Company
Mentor, OH23 days ago- Component Repair Technologies, Inc. seeks a Weld Department Supervisor to lead the weld team during the assigned shift, ensuring safe, structured work and meeting customer goals. The role focuses on TIG and CNC welding of turbine engine components in a climate-controlled...Shift work
Component Repair Technologies
Mentor, OH5 days ago
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Assembler. Be the first to apply!
