Plater
$21 - $23 per hourBodycote
Our people are the heart of our business. As the world's largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, some of the best engineers, scientists, and technicians in the industry. Come join our team! Due to the nature of our business and a heavy industrial market, Bodycote deems this position to be safety-sensitive. Summary: Performs essential job functions as directed under limited supervision to meet customer specifications. Essential Job Functions (Duties and Responsibilities): The primary duties consist of, but are not limited to the following. Accurately and safely loads and unloads metal parts into copper plate and strip tanks using metal hooks or mechanical and overhead crane. Read and decipher work instructions based on customer specifications/work order Immediately brings any unusual problem, irregularity or concern to Supervisor, Foreman/Lead Person or management. Practices and promotes safety and good housekeeping. Performs other tasks as assigned or dictated by position. This position is responsible for the care and treatment of our customer's inventory and as such will perform duties in a safe and responsible manner to prevent customer loss or damage. Must have the ability to report for work on time, follow directions, interact effectively with co-workers, understand and follow rules and procedures and accept constructive criticism. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position must satisfy ITAR compliance requirements, therefore candidates must be U.S. Citizens or Permanent Resident Card Holder. Education - High school diploma or equivalent Must have knowledge of basic math. May be required to work overtime or any shift, including weekends. Must be able to obtain and maintain forklift operation certification. Must demonstrate the ability to read, write and communicate the English language. Physical & Mental Demands: The following physical and mental demands consist of, but are not limited to the following. Must be able to work in a standing position for extended periods of time in an industrial environment Manual dexterity to perform data entry functions Ability to bend, pull, stoop and reach to perform functions Ability to lift up to 50 lbs. May be exposed to heat, fumes, noise, and humidity, etc. Must have the cognitive and mental capacity to perform essential job functions Must be able to communicate effectively orally and in writing Pay & Benefits Information The hourly pay for this position is $21.00 - $23.00 per hour. Starting pay is determined based on experience, skills, and qualifications. This position is classified as non-exempt and is eligible for overtime pay in accordance with state and federal law. This role is eligible for additional compensation, including shift differential, etc., if applicable. Benefits include employee and family medical, prescription drug, dental, and vision coverage; company paid life and disability; HSA/FSA options; 401(k) with company match; paid time off and paid holidays; and an Employee Assistance Program. Benefits eligibility begins on day 61 of employment. The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Bodycote reserves the right to revise or change job duties and responsibilities as the need arises. Bodycote is an Equal Opportunity Employer and does not discriminate against current and prospective employees based on race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age for individuals over forty years of age, military and veteran status, sexual orientation, or any other basis protected by applicable federal, state and local laws. #J-18808-Ljbffr
- If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Combo Pipe Welder #3250 in Cameron, LA Full Time Cameron, LA, US 1 Attachments 4 days ago Requisition ID: 3250 GrayWolf...SuggestedFull timeFor contractorsLocal areaShift work
- What We Are Looking For Coordinate and complete welding, construction and maintenance tasks as part of a roving pipeline crew. What You Will Do Perform pipe fabrication welds, in-service welds, tie-in welds and hot taps on steel pipelines that range in various sizes up...SuggestedContract workRelocationMonday to ThursdayNight shift
- At Fluor Constructors, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions...Suggested
- The Pipe Welder is responsible for welding carbon steel, stainless steel, alloy, and other piping systems in accordance with applicable codes, project specifications, and company quality standards. This position performs high-quality welds in industrial environments while...SuggestedWeekend work
- As a Combo Pipe Welder you will be responsible for using a combination of two of the SMAW, GMAW, GTAW, and FCAW processes to weld various components in flat, vertical, or overhead positions. Responsibilities (other duties may be assigned) Must be able to observe and recognize...SuggestedFlexible hours
$28 - $35 per hour
Aurora, CO | $28-$35/hr + Weekly Pay + Benefits The Pipe Fabricator is a key contributor to our shop operations, responsible for transforming raw materials into precise, high-quality piping assemblies that keep projects moving forward. From reading blueprints and interpreting...Weekly payApprenticeshipFor subcontractorLocal areaImmediate start$50 - $52 per hour
Location: Cameron Parish, LA - CP2 LNG Project Pay: $50-$52/hr Per Diem: $105/day We are hiring experienced Combo Pipe Welders for a large-scale LNG construction project in South Louisiana. Candidates must have strong pipe welding experience and be able to pass 6G weld ...Daily paid- Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting...Local areaWeekend work
- Matrix Project Services Emporia, VA 23847, USA Description PRIMARY FUNCTION: Perform welding functions per jobsite specifications, covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment. TYPICAL DUTIES: Actively...Full time
$50k
Position Description Permanent Full-Time Position 7AM-3:30PM Worth & Company was founded in 1983, and our guiding principle of “standing together strong as an extraordinary team” has established us as one of the most esteemed full service mechanical contractors in the Mid...Permanent employmentFull timeTemporary workFor contractorsLocal area- # Werkvoorbereider (Junior/Medior/Senior)Gorinchem, NL-ZH, NetherlandsID: 8553---## Job DescriptionAt Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking...Contract workWork at office
- Pipe Fitter/Pipe Welder (Full Time) Location: Madison Heights Department: Steel Erection Summary: Pipe fitter lays out, assembles, installs, and maintains pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling,...Full timeLocal areaRelocation
- Location: Houston, TX Job Id: 624 # of Openings: 10 POSITION IS LOCATED IN COLUMBUS, TX WELDER/FITTER BENEFITS: Titan offers: Competitive pay Medical benefits available on day one (1) of your employment 10 paid holidays 3 paid personal days Great working environment...
$24.02 - $26.53 per hour
## Robotic WelderApply: Louisville, KY: Full time: Posted Yesterday: R-101454**Job Description:**Expertise in MIG welding techniques, focusing on the assembly of components, parts, and structures. A strong ability to interpret technical drawings and adhere to work orders...Hourly payFull timeWork experience placementImmediate start- Job Category : Craft Requisition Number : PIPEF034296 Posted : September 29, 2026 Full-Time Locations Showing 1 location Description About Austin Industrial Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies...Full timeWork visa
- Description Looking for a Fabricator / Welder with 4+ years' experience to work at our Oakland Airport Site. Schedule: Monday to Friday 5am-1:30pm Duties: Repair / Weld / Inspections Welding Airport equipment (Dollys, Tugs, Equipment, ect. ) Stick welding Enter Workorders...Hourly payPrice workLocal areaMonday to Friday
- Safety is where everything begins. It shapes our culture, our products, and the way we show up for our communities. Join us as we build smarter technologies that redefine fleet safety. When you help make fleets smarter, you make people safer. Safe Fleet a leader in the...Full time
- L&L Inc is now accepting applications for the position of Fabricator/Welder. This role is responsible for welding, fitting, and fabricating parts and assemblies to specification, while following direction from the shop manager and maintaining a general working knowledge...
- # Maintenance Welding TechnicianLadson## Job DescriptionSchedule hours: 6am - 2:30pm (Pay will be discuss with Manager during in-person interview)We're looking for a dependable **Maintenance Welding Technician** to support the maintenance, repair, and fabrication of equipment...Flexible hours
- Description Merritt Precision manufactures highly sophisticated plugs for the marine, automotive, and aerospace industries in Merritt Island, Florida and Sweetwater, TN. Merritt Precision, a Correct Craft Company, provides the high level of quality, service, and confidentiality...
$22 per hour
Job Description Overview: This is an amazing opportunity for experienced welders to earn $22 hourly on 2nd Shift with growth potential. Plus, radically affordable health insurance after 30 days. $22+ hourly depending on experience 2nd Shift Opportunity for experienced...Hourly payWeekly payContract workTemporary workAfternoon shift- Overview ROBOTIC WELDER - MAYVILLE Reporting to the Robotic Welding Manager, the Robotic Welder is primarily responsible for operating one or more weld machines to fabricate metal parts or assemblies to specifications. Responsibilities Lifts work piece manually or using...Shift workAfternoon shift
- If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Full Time Greenville, SC, US BETTER MOBILITY FOR LIFE Savaria is a global leader in accessibility and patient care...Full time
- Qualified candidates must possess knowledge, skills, and job experience in order to perform tasks and assignments associated with pipeline design, construction, operations, and maintenance of hazardous liquids pipeline systems. This position requires the individual to follow...For contractorsLocal areaImmediate startVisa sponsorshipWork visa
- If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Full- Time Indianapolis, IN, US Location: Indianapolis, IN Company Overview Maddox provides specialized cryogenic...Full timeLocal area
- ECS is seeking an experienced and skilled HVAC Welder/Pipefitter Journeyman to join our team. Responsible for fabricating, welding, and installing piping systems for heating, ventilation, and air conditioning (HVAC) systems. Tasks include reading blueprints, welding pipes...Local areaWeekend work
- Position Summary: The Fabricator will operate manufacturing equipment and machine pieces to meet product specifications to ensure fabrication accuracy; operates within established safety, environmental, quality, operational and financial goals. The Fabricator will operate...Full timeTemporary workFlexible hours
$20 - $22 per hour
Metal FabricatorTopView Sightseeing is a New York City-based company offering a variety of sightseeing bus tours. We own and manage the portfolio of brands, including TopView Sightseeing, Event Cruises NYC, Liberty Cruise, Bike Rental Central Park, and Attraction Pass....Local areaMonday to FridayShift work$22 - $35 per hour
SUMMARY We are seeking a skilled and reliable Fabricator to support the production of fast-paced, creative projects. This role works under the direction of Lead Fabricators, Production Managers, Department Heads, and reports to the Production Director. Fabricators...Temporary workFlexible hoursShift workNight shift$24 - $28 per hour
Join Our Team as a TIG Welder! We're looking for a skilled TIG Welder who specializes in stainless steel and is ready to bring craftsmanship, precision, and pride to every project. #nowhiring Shift: 6am-4:30pm, Mon-Thurs Pay: $24-$28/hr based on experience Job Duties of...Weekly payPermanent employmentShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Plater. Be the first to apply!

