Avionics Technician 2nd Shift

Job DescriptionJob DescriptionMonday - Thursday 2 PM - 12:30 AMJoin a team where every aircraft is a win, and every teammate makes a difference.Our boutique-style MRO is built on customer focus, employee empowerment, and hands-on excitement with every delivery. We are significantly investing in training to expand your skills, enhance your experience, and fast-track your career. If you're looking for more than a job, this is your hangar.Apply now and ask about our custom sign-on bonus.Become a part of the next big thing in MRO.Independently operate, install, adjust, and maintain integrated computer/communications systems, consoles, simulators, and instrumentation used for air and space vehicle launch, tracking, positioning, and evaluation. Configure and troubleshoot data acquisition and test measurement equipment without supervision. Accurately record, analyze, and interpret complex test data for engineering evaluation and mission readiness. Apply standard procedures to ensure system performance and reliability. Basic understanding of wiring diagrams and methodology: wire marking, wire routing clamping, symbols, and simple interconnect diagrams, bonding/groundingBasic understanding of avionics hardware removal and replacement: equipment racks, mounting structures, standard fastenersDocumentation and Regulatory Compliance: understand and use of MM manuals and company paperwork such as removals and squawk sign off.Understanding and able to use computer systems such as Corridor, ATP, Textron One view.Basic Understanding of Avionics test equipment: Multimeter, Laversab Air data tester, Barfield Air data tester, Druck Air data tester, GE Air data tester, IFR4000/6000, TRXThoroughly understand the fundamental principles and accurately demonstrate the correct procedures for grounding an aircraft.Demonstrate the proper procedures and safety precautions to apply power to an aircraftDemonstrate a thorough understanding of the fundamental principles and correctly perform the procedures for removing and replacing avionics hardware.Demonstrate a thorough understanding of fundamental principles and accurately perform the proper procedures for installing airframe components.Exhibit in-depth knowledge of torque principles and correctly apply proper torquing procedures for threaded fasteners and plumbing lines.Fully understand and correctly execute the procedures for inspecting, removing, and installing safety devices, including AMSafe components.Ability to safely operate a digital or analog multimeter to measure voltage, resistance, and continuity in avionics circuits. Understanding test lead configuration, range selection, and safety precautions. Can interpret basic readings and identify common faults in wiring or components with minimal guidance.Able to set up and operate the Laversab Air Data Test Set for pitot-static system checks. Understands basic test sequences, menu navigation, pressure calibration functions, and can verify airspeed, altitude, and vertical speed parameters. Can detect leaks or discrepancies and interpret displayed data under supervision.Proficient in configuring and using the Barfield Air Data Tester to simulate and verify pitot-static inputs. Understands connections to aircraft test ports, performs altitude and airspeed sweeps, and monitors pressure decay/leakage. Able to operate the tester through standard procedures and recognize abnormal responses during functional tests.Capable of independently performing basic test functions with the Druck unit, including automated test scripts for altimetry, airspeed indicators, and static systems. Understands parameter input, reference value comparison, and test documentation. Can troubleshoot common interface or pressure issues.Understands the operational workflow of the GE Air Data Tester, including initiating and controlling tests for pitot-static validation. Able to conduct altitude and airspeed checks, input test parameters, and interpret test results in relation to maintenance manuals. Can assist with calibration procedures and report data accurately.Demonstrates the ability to set up and operate the IFR4000/6000 or TRX test sets to evaluate transponder, DME, TCAS, and communication systems. Understands test modes, antenna connections, and functional test procedures per manufacturer specifications. Can interpret pass/fail results, adjust signal parameters, and verify system compliance with minimal oversight.Able to configure and operate a TCAS test set to perform system interrogations, verify bearing accuracy, and simulate traffic scenarios. Understand aircraft interface connections, test range limits, and can evaluate system response under test conditions. Capable of identifying common system faults and validating TCAS functionality in line with maintenance procedures.Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, the ability to use a volt / ohmmeter.Comprehend in depth the basic principles and demonstrate, to a high degree of proficiency, the ability to perform slip torque checkout of autopilot servosInstalls various communication / navigation equipmentFabricates electrical connectors and wire bundlesFabricate Coax Cable assemblies and terminationsEvaluates installed equipment with various types of test equipmentUnderstands integrated circuits and digital techniquesPerform Ground and Flight Test Procedures Avionics SystemsDemonstrate, to a high degree of proficiency, the ability to remove and install basic electrical / avionics system components.Autopilot/Flight Director/Yaw Damper/VHF/HF Systems operation and checkoutAFIS / Data-Link/Audio Integrating/Satcom Communication Systems operation and checkoutCockpit Voice Recorder (CVR) operation, checkout, and download proceduresEmergency Locator Transmitter operation and checkoutPerform Airshow configuration and updateDownload and update system databasesAircraft Maintenance Diagnostic ComputerDocument maintenance actions according to regulatory and organizational standards.Understand and use of MM manuals and company paperwork such as removals and squawk sign off.Understanding and able to use computer systems such as Corridor, ATP, Textron One view.Class Training FAR 43-13-1A, Chapter 11, Electronic SystemsEducation & Experience:High School Diploma, or equivalent required.2-Year Electronics Technology degree preferred2+ years prior work history dealing with aircraft avionics and test equipment2+ years experience working with Garmin G1000Experience with the following test equipment: Pitot/static tester, Nav 401L, AT 600, OscilloscopePrevious FBO/general aviation experience required.Must meet the requirements of Airport Authority to be receive a badge and have no ramp restrictionsCurrent Valid Driver’s LicenseTechnical Skills:Must be able to read and interpret electrical/avionics system drawings and blueprints, as well as have the ability to use hand tools and electronic test equipment.Communication Skills:Must be able to read and speak English. Must be able to communicate effectively with other personnel.Mathematical Skills:Basic math skills.Reasoning Ability:Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.Budget Responsibility:Assist department managers in maintaining a specified budget.Certificates, Licenses, Registrations:A & P License preferredComputer Skills:Basic computer aptitude requiredPhysical Requirements:Must be able to stand, stoop, kneel, crouch and crawl. Occasional periods of walking, sitting, rotation, bending, pushing, pulling, and reaching.Occasionally lifting up to 25 lbs, and frequently lifting up to 10 lbs.Work Environment:Frequent exposure to general shop conditions, engine noise.Frequent exposure to aircraft exhaust, moving mechanical parts, lubricants, metals, and solvents.Frequent exposure to seasonal weather.What We OfferCompetitive salary with performance-based incentives.Comprehensive benefits package, including health insurance and retirement plans.Opportunities for professional growth and development.A dynamic, supportive team culture that values innovation and collaboration.Equal OpportunitiesEqual Opportunity Employer, including disability and protected veteran status.Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test.This employer uses E-Verify.