TOOLS AND PARTS ATTENDANT

Summary This is a Washington Army National Guard Title 32 Excepted Service Unit Technician position: TOOLS AND PARTS ATTENDANT Location: Army Aviation Support Facility 1 Joint Base Lewis-McChord, Washington 98433 Army National Guard Units Appointment Type: Permanent, excepted service Advertised as: ENLISTED May be used to fill one or more vacancies. Ensure you read this announcement in its entirety, complete all application requirements, and your USA Jobs profile name is accurate Responsibilities A WG-6904-6, TOOLS AND PARTS ATTENDANT: Identifies user's tools, parts and equipment requirements and requisitions stock as needed. Watches and reports items that are in short supply because of breakage or are in need of repair. Recommends possible substitute or interchangeable items. Sets up, shifts and maintains storage locations. Determines methods of storage, identification, and stock location considering such factors as temperature, humidity, height and weight limits, turnover, floor loading capacities, space available, and convenience of handling items. Compiles records concerned with quantity, cost, and type of material received, stored, and issued for a particular job. Prepares periodic inventory and determines the basis for over, short, or misplaced items by checking such references as out-for-repair, issue, and turn-in records. Compiles reports on adjustments of inventory, stock records, spoilage, damage, location changes, and refusal of shipment. Ensures that tools and equipment are maintained in good condition by performing visual and operating checks. May make minor repairs to tools and equipment, determine when damaged items are too costly to repair, and reports damaged or worn out equipment to superiors. Determines stock replenishment levels for centrally controlled supplies within funding limitations. Assures that supplies and monies are not wasted through excess accumulation and that items are on hand in sufficient quantities and at the time required. In addition to established guides and formulas, determines quantities required and timely stock replenishment. Receives a wide variety of supplies and specialized items requiring special handling. Ensures that received items are properly stored in assigned locations. Reviews requisitions for completeness and compliance with regulations and revises quantities ordered based on number on hand. Recommends substitution when supply items are not available. Searches for identifying or management data on items of supply. Compares data listed on documents with reference sources such as federal catalogs, stock lists, or other publications. Receives requests needing additional information and compares with reference sources. Searches for stock number, prices, descriptions, and sources of supply. Traces part number or type number to identify equipment/item manufacturer. Reviews supply transactions or provide customer service for urgent critical shortage items. Codes and classifies requisitions, shipping orders, and other documents. Refers requests to other sources of supply or an inventory control point when stock is unavailable and/or cannot be shipped. Establishes procedures, management of calibration, and testing of Test Measurement and Diagnostic Equipment (TMDE). Establishes procedures, manages, implements and monitors tool room operations. This includes accounting for, issuing and replacing tools. May assist with processing of hazardous materials by inspecting, receiving, sorting, accounting and classifying hazardous materials such as explosives, toxic chemicals, flammables, gas cylinders, radioactive material and hazardous waste. (10) Performs other duties as assigned. Other duties as assigned.(temporary, minor, or incidental tasks) Requirements Conditions of Employment MILITARY REQUIREMENTS: Military Grades: E3 - E6 Desired Military Assignments: 92A,92Y,91F, 15 series - Applicants need not be assigned to the position or possess the MOS to apply or be considered for selection. Selected applicant must be assigned to a compatible Military position and attain MOS within 1 year of appointment action. - May be required to successfully complete a trial period. - Participation in direct deposit is mandatory. - All soldiers, civilian employees, and contractor employees who drive Army-owned or leased vehicles must complete the Army Avoidance Course (AAC) training when they start working for the Army. Must have a valid Washington state and military driver's license. Must be able to obtain a Government Travel Card (GTC) and be able to attend all schools deemed necessary by the supervisor. - Males born after 31 December 1959 must be registered for Selective Service. - Must maintain membership in the WA Army National Guard for continued employment. - Must be able to obtain and maintain the appropriate security clearance of the position. - This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. - Position requires ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. - May occasionally be required to work other than normal duty hours; overtime may be required. - The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. Qualifications GENERAL EXPERIENCE: Experience or training which demonstrates the knowledge of trade; ability to apply identification skill (matching specific item names, models, and stock or part numbers with similar specific information at stock locations); ability to use simple hand tools (pliers, screwdrivers, etc.) and to follow oral and written instructions. SPECIALIZED EXPERIENCE: Must have at least 9 months experience or training in verifying stock by opening, counting, and visually checking the contents of the containers. Experience in establishing stock location by considering such factors as use, size, shape, and weight of items. Experience in completing stock records by showing the names, quantities, and locations of stock. Experience in identifying correct nomenclature and stock number of items to locate stock for issue. Experience in performing maintenance such as replacing wooden handles on handsaws, changing blades on power saws, and greasing or oiling power and hand tools. Education Education Requirements: High School Diploma or GED Degree Required:N/A Degree Required to qualify with Education Only (No Specialized Experience): N/A You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position. If you are selected for a vacancy that requires a specific degree and/or coursework you will be required to provide official transcripts prior to appointment. Substitution of Education for Specialized Experience: Not Applicable. Additional Information - Certain incentive(s) may be available pending funding and approval but are not guaranteed. - If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( - Military Technicians are ineligible for enlistment, retention, and student loan repayment bonuses. Acceptance of a Technician position will terminate these incentives. - Military Technicians in the excepted service will wear the appropriate uniform while performing as a Technician. - Veteran's preference does not apply to National Guard Technician positions in accordance with Title 32 USC 709 (f). - May be required to successfully complete a trial period. REEMPLOYED ANNUITANT: In accordance with Section 9902(g) of Title 5, United States Code (U.S.C.), annuitants reemployed in the DoD will receive full annuity and salary upon appointment. They will not be eligible for retirement contributions, participation in the Thrift Savings Plan, or a supplemental or redetermined annuity for the reemployment period. Discontinued service retirement annuitants (i.e., retired in accordance with Section 8336(d)(1) or Section8414(b)(1)(A) of Title 5, U.S.C.) appointed to the DoD may elect to be subject to retirement provisions of the new appointment as appropriate. EQUAL OPPORTUNITY: The WA National Guard is an equal opportunity employer and does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service or other non-merit factor. If you are unable to upload a document online please send the document via email to our WA HRO Distro Box.