Controls Specialist
Pioneer Transformers
Controls Specialist
The Controls Specialist is a hands on Maintenance position responsible for troubleshooting and repairing electrical and controls related issues on production equipment. This position is intended for an experienced Maintenance Technician with strong knowledge of PLCs, drives, sensors, HMIs, electrical controls, and general industrial Maintenance. The Controls Specialist will also perform normal Maintenance duties and assist with mechanical, electrical, pneumatic, and hydraulic repairs as needed.
The Controls Specialist should be able to approach a machine fault, determine whether the issue is electrical, controls related, or mechanical, and work through the problem logically. This position will serve as an additional technical resource for the Maintenance department while remaining a hands on member of the Maintenance team. Strong troubleshooting ability, initiative, communication, reliability, and the ability to work independently during off shift hours are important to success in this position.
- Standing and walking for extended periods.
- Working around operating machinery.
- Climbing, bending, kneeling, and reaching.
- Lifting Maintenance tools and components.
- Responding to equipment breakdowns and production needs.
- Working safely around electrical and mechanical equipment.
Primary Responsibilities:
- Troubleshoot electrical and controls related machine issues.
- Connect to PLCs to assist with troubleshooting equipment faults.
- Use Studio 5000 and other applicable software to identify faults and monitor machine operation.
- Troubleshoot HMIs, VFDs, servo drives, sensors, switches, relays, contactors, and control circuits.
- Troubleshoot communication issues between machine components.
- Read electrical schematics and use them to assist with repairs.
- Replace failed electrical and controls components.
- Verify wiring, inputs, outputs, sensors, and machine sequences.
- Assist with servo motor and drive troubleshooting.
- Support production breakdowns and help reduce equipment downtime.
- Perform preventive maintenance on electrical and controls components.
- Document repairs and findings in the Maintenance system.
- Assist other Maintenance technicians with electrical and controls troubleshooting when needed.
- Perform general mechanical, electrical, pneumatic, and hydraulic Maintenance work as required.
- Maintain a safe and organized work area.
Required Qualifications:
- Industrial Maintenance experience.
- Strong electrical troubleshooting skills.
- Experience troubleshooting PLC controlled production equipment.
- Working knowledge of Allen Bradley PLCs and Studio 5000.
- Experience with HMIs, VFDs, sensors, relays, motors, and control circuits.
- Ability to read electrical schematics.
- Understanding of 24VDC, 120VAC, and 480VAC systems.
- Ability to use a multimeter and other common electrical troubleshooting tools.
- Ability to work independently and make sound troubleshooting decisions.
- Strong mechanical aptitude.
- Willingness to assist with all areas of Maintenance when needed.
Preferred Qualifications:
- Experience with Allen Bradley equipment.
- Experience with servo motors and servo drives.
- Experience with Keyence sensors.
- Experience with industrial manufacturing equipment.
- Experience troubleshooting automated machinery, conveyors, furnaces, and similar production equipment.
Job Locations:
US-WI-Bristol
Pioneer Transformers$86.63k - $132.83k
...Job Description Control Specialist At CNH, we're driven by a clear purpose: we serve and advance the people who feed and build a growing world. As a global leader in agriculture and construction, we create the equipment, technology, and solutions that help our customers...SuggestedFlexible hours- ...experienced professionals are hard at work on commercial and industrial sites throughout the Midwest. The Position: As a Quality Control Technician, you'll be the quality eyes on our construction projects-testing materials like concrete and asphalt, taking...SuggestedLocal area
- ...Career Opportunities: Quality Control Technician (529950) Requisition ID 529950 -Posted 10/19/2026 - Infrastructure Products Group - Oldcastle Infrastructure - Full Time - Quality - United States - Wisconsin Oldcastle, a CRH company, is reinventing what's possible in building...SuggestedPermanent employmentFull timeTemporary workFor contractorsLocal area
$2,000 per month
...Quality Control Technician IIJensen Metal Products is a metal fabrication business with over 100 years of experience serving the Midwest and surrounding regions with custom, quality sheet metal parts and assemblies. With a broad range of manufacturing capabilities, we...SuggestedContract workWork at office- ...verelied on our talented and dedicated team members to provide reliable products with personalized service. We're hiring a Quality Control Technician to join County Prestress in Burlington, WI. Job Summary: A Quality Control Technician ensures products meet...SuggestedTemporary workLocal areaMonday to FridayFlexible hoursShift work
- ...Job Description Job Description Description FII USA, Inc ., a Foxconn Technology Group Company, is seeking an Access Control Specialist that will work as part of a team to provide support to the Security Operation Center. Once part of the team you will be responsible...Full timeTemporary workWork at officeRotating shiftDay shift
$17 - $19 per hour
...essential functions of this job, the employee is regularly required to use hands to lift, move, and handle materials, tools, and controls. The employee is regularly required to use paper and a pen, pencil and/or keyboard to read and record data. The employee frequently...Work at office- ...Inventory Control LeadFII USA, Inc., a Foxconn Technology Group Company, is seeking an Inventory Control Lead to oversee daily inventory control activities and ensure accurate inventory management for returned products throughout the repair process. Once a part of the...Full timeTemporary workWork at office
- ...Infection Prevention Specialist Froedtert South, Inc. Pleasant Prairie, Wisconsin, United States About this position Infection Prevention... ...and health care workers. Monitors compliance with infection control standards such as hand hygiene, barrier precautions and isolation...Local area
$136.24k
...developing Work Breakdown Structures (WBSs), activity logic ties and dependencies, and activity durations. Works with project controls team to update the project schedule with actual progress including changing durations or logic ties as necessary to manage the critical...Contract workWork experience placementFor subcontractorH1b- ...Safety Specialist The Safety Specialist supports the development, coordination, and implementation of safety programs to ensure a safe... ...with safety signs, posters, barriers, and other materials to control access to hazardous areas Respond to safety-related...For contractorsWork at officeLocal area
- ...EHS SpecialistThe EHS specialist serves as a key contributor in supporting both ARCC and HH USA in the success of the Environmental, Health... ...leadership and teamwork skills, including the ability to take control of projects, remain calm when facing challenges, implement...Work at officeLocal area
$45 - $50 per hour
...on a data center construction project in Wisconsin. The Safety Specialist promotes a strong safety culture by monitoring daily field... ...inspections, and jobsite walkthroughs to identify hazards, verify controls, and support safe execution of work. Enforce OSHA...Contract workTemporary workFor subcontractorWork at office- ...Production Controller Department: GL6 Production Employment Type: Full Time Location: SMC Description FII USA, Inc ., a Foxconn Technology Group Company, is seeking a Production Controller that will work as part of a team to assist in planning and...Full timeTemporary workWork experience placement
- ...Description FII USA, Inc., a Foxconn Technology Group Company, is seeking a Calibration Program Specialist to administer the campus calibration and measurement-equipment control program and coordinate calibration schedules, equipment tracking, and supplier services. Once...Full timeTemporary work
- ...Facilities Specialist Corporate Headquarters 12575 Uline Drive, Pleasant Prairie, WI 53158 Join the team that manages Uline’s growing footprint of first-class facilities! Working as a Facilities Specialist at our Corporate headquarters, you’ll help ensure...Work at office
- ...repairs. Travel to customer location to make repairs and document work performed. Track and maintain parts availability and support by controlling on-site parts inventory. Must be willing to travel on a continual basis during the five-month time period. Trice Healthcare
- ...Job Description Job Description *Please Note this is a TEMP TO HIRE position. 90 Days working as a TEMP employee in Quality Control Department* Job Title: Quality Control Technician Job Type: Full-Time Location: Pleasant Prairie, WI Shift: Monday through...Full timeTemporary workWork at officeLocal areaMonday to FridayShift work
- Description FII USA, Inc. is seeking a Learning Systems Specialist to administer and maintain the learning management system (LMS) and... ...Maintain alignment between active training courses and applicable controlled-document revisions, updating, replacing, retiring, or...Full timeTemporary workShift work
$22.26 per hour
...Admissions/Release Specialist The Kenosha County Sheriff's Office is currently recruiting for the full-time position of Admissions/... ...environment Ability to, while in a secure setting, possess the self-control and ability in verbal communication skills to manage...Hourly payFull timeWork experience placementWork at officeLocal areaTrial periodFlexible hoursShift workRotating shiftWeekend work- ...relationship building? WE WANT YOU ON OUR TEAM! The Member Specialist (Bank Teller) is primarily responsible for meeting or exceeding... ...culture. Comply with federal and state regulations and internal controls and expectations while maintaining secure inventory control of...Temporary workLocal areaNight shift
- ..., a Foxconn Technology Group Company, is seeking an NPI PMH Specialist to coordinate material handling activities, maintain inventory... ...(SOPs) related to SMT material handling, storage, inventory control, and NPI material readiness. Support continuous improvement...Full timeTemporary workWork at office
- ...scopes, enforces applicable safety policies and procedures, and supports a strong safety-first culture in the field - Overseesquality control for assigned trades,conductsinspections, documents findings, andimplementscorrective actions tomaintaincompliance with project and...Contract workTemporary workFor contractorsWork at office
$86.63k - $132.83k
About Us At CNH, we're driven by a clear purpose: we serve and advance the people who feed and build a growing world. As a global leader in agriculture and construction, we create the equipment, technology, and solutions that help our customers work more...Full timeFlexible hours- ...scopes, enforces applicable safety policies and procedures, and supports a strong safety-first culture in the field - Oversees quality control for assigned trades, conducts inspections, documents findings, and implements corrective actions to maintain compliance with...Contract workTemporary workFor contractorsWork at office
$63 per hour
...• Oversees and coordinates field construction related services on projects, enforcing adherence to safety, environmental, quality control, and permitting requirements • Conducts site investigations, reviews relevant data including maps, reports, test results, drawings...Contract workFor contractorsWork experience placementH1bImmediate startOverseasFlexible hours$51.63k - $124.72k
Job Description Job Description Job Description: Border Patrol Agent (BPA) / Customs and Border Protection Officer (CBPO) About U.S. Customs and Border Protection U.S. Customs and Border Protection (CBP), with more than 69,000 employees, is one of the world's ...Full timeWork experience placement- ...Job Description Job Description Description FII USA, Inc., a Foxconn Technology Group Company, is seeking a Document Control Specialist to administer controlled-document and records-management processes and maintain accurate revision control, approval workflows...Full timeTemporary workWork at office
- ...Sr. Controls & Automation Technician Ocean Spray is hiring for a(n) Sr. Controls & Automation Technician! We're a team of farmers, thinkers, creators, and doers. Whatever your title, whatever your role it always comes back to this: we're a farmer-owned co-op where...Temporary workWork experience placementRemote workFlexible hours
$30 - $40 per hour
...dimensional inspection.Experience in blueprint reading, quality control, and inspection of custom manufactured components.Interest in... ...work area. The quality team consists of a small group of specialists and engineers, and this position adds to that core team, offering...Monday to FridayShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Controls Specialist. Be the first to apply!



