WELDER (2310)
Jefferson Parish
EXAMINATION IS ANNOUNCED TO ESTABLISH AN EMPLOYMENT LIST TO FILL ONE (1) CURRENT EAST JEFFERSON VACANCY IN THE STREETS DEPARTMENT. This employment list will be used for future EAST AND WEST Jefferson vacancies in various Departments as they occur. Under general supervision, the purpose of this position is to perform all routine work involved in welding. Position is responsible for the use of welding procedures in fabrication, preventive maintenance, and on construction projects. Employee in this position will read plans and fabricate from drawings. For the current vacancy, employee performs all necessary work involved in welding requirements for the maintenance and repair of vehicles and equipment. including but not limited to layout, cutting and fitting, brazing, brushing, chipping and grinding. Employee will maintain and make minor repairs to welding equipment. Employee must be able to estimate time and materials used for a particular job and complete necessary reports. Operates a welding truck. Drives to and from various locations to perform job duties. This position is an essential, emergency duty status worker and may not be relieved of duty when the Parish President or his designee recommends a voluntary or mandatory evacuation of Jefferson Parish. Position requires driving of a Parish vehicle necessitating a class D license, thus possession of a valid Class D Driver's license and acceptable driving record will be given preference. At least six (6) months of verifiable, paid, journeyman-level welder experience, directly related to the work described above. OR A verifiable training credential from an NCCER Welding program or an American Welding Society (AWS) SENSE program (or other verifiable professional certification in an AWS Welding program). Proof of training is required. Related education, experience, and/or professional certification(s) above and beyond the minimum qualifications will be required for consideration of an entrance salary above the minimum rate but not to exceed the listed salary range. (ENTRANCEANDPROMOTIONAL) Rating of Training and Experience - - - - - - - - - - - - - - Weighted 100% The Rating of Training and Experience will be conducted through the answers to the supplemental questions on the application. Applicants must supply complete and accurate information concerning their welding-related training and experience including a detailed description of their work experience, the names and addresses of all previous employers and the dates of employment. The information is subject to verification and the Personnel Department reserves the right to determine the quality and quantity of education and experience claimed for credit.
JOB POSTING NO: 2310-10R
DATE: 08/12/11
AMENDED: 02/12/21
RE-OPENED:09/18/26
#J-18808-Ljbffr Jefferson Parish- ...Join us and be part of a company that values craftsmanship, dedication, and safety. Job Description We are seeking a skilled Combo‑Welder to join our team. The ideal candidate will have experience working with stainless steel pipe welding and a strong commitment to...SuggestedFor contractorsImmediate start
$50 - $52 per hour
Location: Cameron Parish, LA - CP2 LNG Project Pay: $50-$52/hr Per Diem: $105/day We are hiring experienced Combo Pipe Welders for a large-scale LNG construction project in South Louisiana. Candidates must have strong pipe welding experience and be able to pass 6G weld...SuggestedDaily paid- ...skilled craft personnel for various industrial construction projects in Louisiana. Positions available include Scaffold Builders, Welders, and more. Ideal candidates will have a commitment to safety, teamwork, and physical endurance. Opportunities are available for all...SuggestedFor contractors
$25 per hour
# Welder 2Hot JobGeismar, LA (70734) - Geismar, LA 70734## OverviewSalary Range$23.00 - $25.00 HourlyPosition TypeFull Time## DescriptionStainless Steel Structural Welder – $25/hr + Paid Travel Perks!**Work Across the US – We Cover Your Airfare, Hotel & Rental Car!**At...SuggestedDaily paid- About us Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction...Suggested
- ...GED or Vocational school recommended but not limited. Experience One or more years company on-the-job training working as a 3G-4G welder. Specific Knowledge/Skills Must be a certified welder who possesses a written certification from an employer or certifying agent,...Weekend work
- Fluxcore Welding Weld Components in flat, vertical, or overhead positions. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Examine workpieces for defects and measure workpieces ...
- ..., and a world‑class family culture that is centered around creating the best possible environment for our people to thrive. Combo Welder - Gulf Coast Industrial Team Our Gulf Coast Industrial team is seeking skilled Welders with experience performing high‑quality welding...Local areaAll shifts
- ...function of this role includes: performing preventative maintenance and repairs to equipment throughout the plant and support efforts of Welder, Mechanic. Tasks include welding, mechanics, and fabrication. Welding will be the primary responsibility of the welder position....ApprenticeshipShift work
- As a Sheet Metal Welder, you will be responsible for welding, fabricating, and assembling sheet metal products (16 & 18ga stainless steel, galvanized , and Galvinized) and using various welding techniques such as MIG, TIG, and Stick welding. The role involves interpreting...Temporary workApprenticeship
- Job Description ZACHRY is currently seeking an experienced Industrial COMBO WELDER for CHENIERE in Cameron, LA. NO PERDIEM. TWIC CARD & DRIVER LICENSE REQUIRED. Position Summary A Combination Welder will weld, fabricate and assist pipe fitters in installation of varying...
- Amentum is seeking an experienced welder to perform precision welding and metal fabrication for prototype and production tasks. You will weld using various processes to meet exact tolerances, inspect parts, and support continuous improvement in a high-skill shop environment...
- Twin Brothers Marine LLC is hiring a welder with documented certification and experience in multiple welding processes. Candidates should be able to perform welding as specified by layouts and blueprints, while maintaining quality bead appearance and weld integrity. The...
$21 - $29.5 per hour
WelderStatus: Non-exempt (hourly)Position SummaryThe welder is responsible for the construction of various products primarily focusing on welding and fabrication techniques. The welder will follow the process below in every welding scenario (I, P, W, C, I)Identify materials...Hourly payLocal area- Twin Brothers Marine, LLC in Production seeks a certified welder to join the Welding department. You will weld components to blueprints using arc welding equipment and follow welding procedures to ensure quality. Expect on‑the‑job training, ability to pass 3G-4G qualification...
$21 - $29.5 per hour
Plug Power Inc. in Missouri is seeking a Welder I-II to join our fabrication team. You will weld components to ASME specifications, read drawings, and set up parts using grinders and calipers while ensuring precision across multiple positions. The role offers hourly pay...Hourly pay- Worley is seeking a Combo Welder to lay out, align and weld fabrications for structural forms, tanks, vessels and piping, following blueprints and metallurgy. This hands-on role supports our industrial construction and maintenance projects in the United States. Ideal candidates...
- Gallo Mechanical, LLC is seeking a Sheet Metal Welder to join our team. You will weld, fabricate, and assemble sheet metal components using MIG, TIG, and Stick techniques, while reading blueprints and ensuring high-quality results. The role emphasizes safety, calibration...Apprenticeship
- Compass Minerals International is seeking a welder/mechanic to perform preventative maintenance, welding, fabrication and repairs on plant equipment at our facilities in the United States. The role supports welding and mechanical duties, inspects machinery, and coordinates...
- Hydro is seeking a Fab Tech - Welder I in Delhi, LA to join our production team. You will identify proper welding wire and alloy for base metal and set welding parameters for aluminum work. This role requires the ability to pass an on-site welding test and handle high-...Flexible hoursEarly shift
- Worley is seeking a skilled welder for an on-site role to assemble and repair industrial components. You will read blueprints, set up and operate welding equipment, and perform pipe and structural welding across boilers, tanks, and vessels. With a minimum of four years...
- Tacony Corporation is inviting skilled Welders to join their Gulf Coast Industrial team. As a Combo Welder, you will perform high-quality welding on commercial projects and must possess strong knowledge of welding procedures and techniques. The ideal candidate should be...All shifts
- Fluxcore Welding is seeking skilled welders to join a hands-on fabrication team. The role involves welding in flat, vertical, or overhead positions, laying out and securing parts, and inspecting weld quality. Candidates should be proficient with hand and power tools, and...
$23 - $25 per hour
Industrial Air Flow Dynamics, Inc. is seeking a Stainless Steel Structural Welder to join our national travel crew. You will weld stainless steel structures at power plants nationwide using Flux-Core, with travel required for turnaround projects. We cover airfare, hotel...Hourly payDaily paid- Chicago Bridge & Iron Company is looking for a Tank (Erection) Fitter/Tacker in Louisiana, Missouri. This skilled craft role entails erecting, fitting, and welding steel storage tanks and vessels, while ensuring proper safety and quality procedures are followed. Applicants...
- Twin Brothers Marine, LLC is seeking an experienced welder to join the Production/Welding team. The role involves welding metal components for marine products using electric arc welding, following layouts, blueprints, and procedures. The candidate should be able to position...
- TIC - The Industrial Company is seeking a skilled field worker to lead layout, installation, and steel erection on construction sites. You will read blueprints, set up hoisting, weld, bolt, and align structural members while adhering to safety standards and project specifications...
- Air Liquide is hiring a Production Technician in Port Allen, LA to operate Air Separation Units, nitrogen generators, and oxygen compressors. The role emphasizes safety, permit issuance, and lockout/tagout procedures while ensuring compliance with SOPs and plant regulations...
- Benefits: Fuel Your Growth with Love's - company funded tuition assistance program Paid Time Off Flexible Scheduling 401(k) – 100% match up to 5% Medical/Dental/Vision Insurance after 30 days Competitive Pay Career Development Hiring Immediately Welcome to Love’s! Tire...Immediate startFlexible hoursNight shift
- OnSite Concrete Solutions, LLC is seeking a Plant Mechanic to oversee efficient operation of plant equipment. The role involves mechanical, electrical, pneumatic and electronic repair and preventive maintenance with travel across Louisiana and Texas. The ideal candidate...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to WELDER (2310). Be the first to apply!

