SHEET METAL MECHANIC (AIRCRAFT) (T32) Jobs

Sheet Metal Mechanic (Aircraft)

Duties Major Duties: This is not an all-inclusive list A SHEET METAL MECHANIC (AIRCRAFT) (T32), WG, 3806, 10, (1) Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Works directly on the aircraft and its components, fulfilling such tasks as removal, repair, modification and installation of parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. May be required to clear red "X" conditions. (2) Repairs cracks in aircraft skin. Fabricates and fits patches to damaged areas, determining repair detail necessary to retain or restore original strength. Fits and trims components to aircraft such as landing gear doors, control surfaces, flaps access doors and other assemblies. Seals structures to make them pressure, water and weather tight. (3) Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Removes, forms, fits, and installs highly stressed and double contoured skins, using hand or powered drilling and cutting tools and other metal working equipment. Determines shear and bearing load factors during rivet replacement. Installs heads up, regular, heat treated, high shear, and blind type aircraft rivets and fasteners, using pneumatic riveters, special tools and bucking bars. Removes damaged or broken fasteners and receptacles. (4) Aligns and balances component structures and airframe using precision measuring instruments and levels. Performs metal-to-metal bonding where delamination of surfaces and core material occurs in control surfaces. (5) Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and nonpowered tools and equipment. Repairs or replaces retaining frames and installs plastic laminated blanks. Designs and constructs forming fixtures. (6) Manufactures and ensures that metal tubing, conduits and cables are fabricated and tested in accordance with drawings and specifications. Fabricates and repairs flexible control cables. (7) Performs fabrication of local manufactured items requited for aircraft and equipment. Work includes layout, bending, cutting, forming and assembling. Devise and calculates patterns employing the principles of triangulation, radial and parallel line development. (8) Sets up and operates power shears, brakes, rolls, dimpling machines, drill presses, saws, portable powered tools, specific detection and measuring equipment, and other metal working equipment, including use of other tools of the trade. Requisitions necessary supplies and equipment for the activity. (9) Prepares and designs layout, dies, jigs, and templates necessary to carry out fabrication repair or modification of aircraft, engine, AGE, and other equipment. Works from blueprints, technical orders diagrams, and work orders. (10) Identifies metal corrosion. Performs necessary testing to identify type corrosion present by examination with magnifying equipment, chemical and mechanical methods and treats aircraft engines, in accordance with applicable technical publications. Ensures that work assignments received from supervisor or maintenance control are accomplished in a timely manner. (11) Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Treats metal with chemical procedures, such as acids and caustics for passivation and etching, to protect metal from oxidation. Performs such functions as pickling of metals to prepare for good bonding with primer coat of protective materials. (12) Applies protective coatings, markings, and decals after proper removal of corrosion and treatment of metals. Uses conventional paint spray equipment, electrostatic spray equipment, brushes and special applicators when applying primers and surface coatings. (13) Identifies, blends, stores, controls, and disposes of hazardous materials such as acids, caustics, alcohols, solvents, cleaners, primers and surface coatings used for corrosion removal, treatment and protection in accordance with applicable directives. (14) May operate the wash rack. Accomplishes corrosion and washing inspections within schedule provided to ensure compliance with the monthly and weekly maintenance plan. May conduct training on proper methods and procedures of wash rack operations. (15) May assist in training of drill status guard members and in maintenance of publication files of applicable technical orders, regulations, manuals and local directives. Performs other duties as assigned. A full duty description is available upon request.

Requirements Conditions of employment CONDITIONS OF EMPLOYMENT

• Minnesota Air National Guard Membership is required. If you are not sure you are eligible for military membership, please contact a Air National Guard recruiter prior to applying for this position. Applicants who are not currently a member of the MN Air National Guard must be eligible for immediate membership and employment in the Air National Guard per the military grade(s) listed in this announcement.
• Selectee will be required to wear the military uniform.
• Males born after 31 December 1959 must be registered for Selective Service.
• May be required to successfully complete a probationary period.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
• Must be able to obtain and maintain the appropriate security clearance of the position.
• Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.

***Federal employment suitability as determined by a background investigation*** Upon selection, individuals will undergo a background check to validate suitability for employment with the federal government as permitted by law, regulation, Presidential order or other authority. Suitability is dependent upon the particular requirements for security clearance, sensitivity level, and DOD IT network access . Items checked include, but are not limited to all criminal history record information, employment history, education and fiscal accountability/responsibility.

Qualifications In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Do not copy and paste the duties, specialized experience, or occupational assessment questionnaire from this announcement into your resume as that will not be considered a demonstration of your qualifications for this position and you may be rendered disqualified.

MILITARY GRADES : E-3 (A1C) to E-5 (SSgt) Your rank must be included in your application. Failure to obtain a compatible AFSC may result in termination of employment.

GENERAL AND SPECIALIZED EXPERIENCE QUALIFICATIONS REQUIREMENTS : Work involves the fabrication, modification, repair, assembly, and installation of sheet metal parts, items, and assemblies. Metals include but are not restricted to galvanized and black iron, aluminum and aluminum alloys, stainless steel, copper, and brass sheets, lead alloys and bronze. Minimum Requirements: WG - Experience or training that has provided the candidate with the ability to plan, manufacture, and install cylindrical, square, or rectangular-shaped objects that have easily constructed fastenings such as single and double-hem edges and single, double or grooved seams. Knowledge of Equipment, Structure, Materials, etc. (includes constructing repair, and forging; Ability to Interpret Instructions, Specifications, etc. (includes blueprint reading); Layout and Pattern Development (includes Geometric Projection and Triangulation); Ability to Use Hand Tools, Power Tools, etc., for Metal Work; Dexterity (Assembly Disassembly Reassembly etc) Specialized Experience: WG-09 and above - Experience or training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. Experience using more complicated shop tools and equipment. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments. Aircraft Structural Repair experience and previous/current possession of below listed military specialties is preferable: 2A7X3, 2A7X5, NOS A130, or MOS 15G. Education EDUCATION: N/A You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position. Additional information REMARKS : No PCS available. The military grade of the supervisor must equal or exceed the grade of personnel supervised. Sensitivity Level 2. Participation in direct deposit is mandatory. Acceptance of a Technician position may result in the termination of your Selected Reserve bonus. To view ALL MN National Guard Vacancies, go