Electro-Mechanical Tech I
Amcor Limited
Job Description About the role Demonstrated competency position responsible for electrical and mechanical troubleshooting and repair for production and support equipment with special emphasis on electrical and electronics technologies. Must utilize safe work practices and maintain high standards of integrity and professionalism. Works under general supervision and on projects that are typically complex and require original thinking and action. General directions are given on unusual or new assignments; works independently on majority of activities. . Key Job Accountabilities Follows all Company policies regarding safety, quality and attendance. Performs duties in a safe manner and report all observed safety hazards to management and takes a proactive role in correcting these conditions. Proactively troubleshoots, repairs, and corrects mechanical, electrical, and process problems to ensure capability of production equipment Troubleshoots and repairs electronic technologies including but not limited to drives and PLC's Provides 24/7 technical support for production. Regularly inspects production lines and support equipment and performs necessary repairs and upgrades during maintenance service cycles. Leads assembly, installation, disassembly, and demolition of production equipment and building support equipment as required for upgrades or new installations. Maintains a neat and orderly work area; meets plant and department housekeeping standards. May be assigned additional housekeeping responsibilities throughout the plant as needed to maintain a clean and orderly workspace. Identifies and works with contractors as needed for maintenance or project work. Maintains building and grounds. Participates in employee driven teams to address scrap, quality, safety or other production related issues. May provide support for printer maintenance and service as needed. Performs other duties as assigned or requested. Qualifications/Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education Knowledge normally acquired through completion of a High school diploma or GED is required. Possession of, or active pursuit of, certification or Associate Degree in Electrical/Electronic technology is required. Skills/Experience In addition to the educational requirements, four years minimum work experience in industrial maintenance including troubleshooting and repair of electrical, electronic, and mechanical systems. Experience with blown film manufacturing and converting equipment is a plus. Minimum education and years of experience should not be used exclusive of other leveling factors described below.
- Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.
- Quality Focus - Is dedicated to providing the highest quality products and services which meet the needs and requirements of internal and external customers looks for ways to improve and promote quality; demonstrates accuracy and thoroughness; monitors own work to ensure quality.
- Dependability - Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan.
- Language Skills - Ability to read and interpret procedure manuals, specification sheets and other product documentation. Ability to write simple reports and instructions. Must be able to understand and write in English.
- Mathematical Skills - Basic mathematical skills to be able to understand simple mathematical concepts such as percentages and ratios; Ability to read a weight scale and tape measure and/or ruler to perform quality checks and transfer to documents.
- Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; keeps emotions under control; relates well to all kinds of people, peers, subordinates and supervision; builds appropriate rapport; builds constructive and effective relationships.
- Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations.
- Oral Communication - Speaks clearly; Listens and gets clarification; Demonstrates group presentation skills; Participates in meetings.
- Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed.
- Ability to organize and prioritize work activities and to handle multiple projects simultaneously.
- Must demonstrate the ability to provide senior leadership role. May be asked to substitute for Maintenance Supervisor.
- Must have solid electrical and mechanical skills.
- Must demonstrate the ability to follow written and verbal instructions with little or no supervision.
- Must be able to read and understand mechanical and electrical blueprints, drawings, and schematics.
- Ability and willingness to work overtime as required. Rotate on-call schedule with maintenance staff.
- Computer Skills - To perform this job successfully, an individual should have knowledge of general computer systems in order to utilize automated product scanning software.
- ...efficient operations in challenging environments. Our teams combine mechanical, electronic, and hydraulic expertise to support high-... ...policies. The Baker Hughes internal title for this role is: ARMO Tech - Electro Mech III About Us: We are an energy technology company that...MechanicalWorldwide
- ...communication/interface skills with customer field personnel, onsite vendors, and other tech teams. Ability to operate independently with little or no supervision. High degree of mechanical ability. Experience reading and understanding technical manuals. Experience...MechanicalContract workTemporary workWork experience placement
- Amcor Flexibles, LLC is seeking an on-site Maintenance Technician in Texas responsible for electrical and mechanical troubleshooting and repair of production and support equipment. This role emphasizes electrical/electronics technologies, safety, and professionalism while...Mechanical
- Amcor is seeking an experienced Maintenance Technician to troubleshoot and repair electrical, electronic, and mechanical systems on production and support equipment. The role requires safe work practices, integrity, and the ability to work independently on most tasks....MechanicalFor contractors
- ...including trucks, buses, construction machinery, and generators.Diagnostic Testing: Utilize diagnostic tools and equipment to identify mechanical, electrical, and hydraulic issues in diesel engines and related systems.Repair and Maintenance: Perform repairs and maintenance...MechanicalApprenticeshipFlexible hours
- ...Description Smartphone Repair Technician. About us: United Smart Tech offers a network of professional, experienced technicians... ...hardware/software, PC/MACs, and game consoles. Strong mechanical aptitude and troubleshooting skills. Must have a valid driver...MechanicalBi-weekly payFor contractorsFlexible hoursShift workDay shiftAfternoon shift
$21.5 - $30.75 per hour
...networking support to help our valued customers with basic technical expertise of Canon-supported products. Your Impact Diagnose basic mechanical, software, network, and system failures using established procedures. Service and repair designated equipment to Canon standards...MechanicalHourly payFull timeFor contractorsFor subcontractorCasual workWork at officeLocal areaShift work- ...wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber...MechanicalHourly payFull timeFor contractorsFlexible hours
- ...Cath Lab Tech Location: Victoria, TX Agency: TotalMed Pay: Competitive weekly pay (inquire for details) Shift Information: Days Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position TotalMed is seeking a qualified...Weekly payDaily paidFull timeContract workShift work
$2,774 per week
...Cath Lab Tech Location: Victoria, TX Agency: Advantis Medical Staffing Pay: $2,774 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position Advantis Medical, the #1...Full timeContract workImmediate startShift work$2,713 per week
...Cath Lab Tech Location: Victoria, TX Agency: Triage Staffing LLC Pay: $2,713 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position Travel Radiology: Cath Lab Tech...Full timeContract workShift work$2,722 per week
...Cath Lab Tech Location: Victoria, TX Agency: TGL MedStaff Pay: $2,722 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Role: TGL MedStaff is seeking a Cath Lab Tech for...Full timeContract workSummer workShift work$2,747 per week
...Cath Lab Tech Location: Victoria, TX Agency: GetMed Staffing Pay: $2,747 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position GetMed Staffing is searching for a...Full timeContract workShift work$3,031 per week
...Cath Lab Tech Location: Victoria, TX Agency: AHS Staffing Pay: $3,031 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: ASAP About the Position Radiologic Technologist - Cardiac Cath Lab -...Hourly payWeekly payDaily paidFull timeContract workImmediate startFlexible hoursShift work$2,669 per week
...Cath Lab Tech Location: Victoria, TX Agency: Atlas MedStaff Pay: $2,669 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position Atlas Medstaff is currently seeking...Hourly payFull timeContract workWork at officeShift work- ...Cath Lab Tech Location: Victoria, TX Agency: Titan Medical Group Pay: Competitive weekly pay (inquire for details) Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position Travel...Weekly payFull timeContract workShift work
$2,462 - $2,829 per week
...Cath Lab Tech Location: Victoria, TX Agency: Fusion Medical Staffing Pay: $2,462 to $2,829 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position Travel Cath Lab Tech...Full timeContract workTemporary workShift work$2,957 per week
...Cath Lab Tech Location: Victoria, TX Agency: talent4health Pay: $2,957 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position 5 Day Shifts X 8 Hrs Requirements...Full timeContract workShift workDay shift- ...and repair downhole tools in a high‑pressure, safety‑critical environment. The role requires hands‑on experience with electronic, mechanical, and hydraulic subsystems and a strong focus on quality and reliability. You will work closely with engineering, quality, and...Mechanical
$22.5 - $40.25 per hour
...in a full-time at a 4-year accredited university/college in one of the following fields of study: Business, Industrial/Electrical/Mechanical Engineering, Manufacturing Operations, or Supply Chain Management at the time of application and throughout the program. Must...MechanicalHourly payFull timeInternshipSummer internshipWork at officeWorldwideRelocationRelocation package- ...District Mechanic Primary Purpose: To maintain all District mechanical general-purpose vehicle equipment and small engines for safety, appearance and operating efficiency. Qualification Guidelines: Education/Certifications: High school diploma or GED Valid...MechanicalImmediate start
- ...operations. You will apply hands-on expertise across electronic, mechanical, and hydraulic systems to ensure safe, reliable, and high-... ...The Baker Hughes internal title for this role is: ARMO Tech - Electro Mech II About Us: We are an energy technology company that...MechanicalWorldwideFlexible hours
- A leading environmental solutions provider in Texas is seeking a skilled mechanic to perform preventive maintenance and repairs on diesel and gasoline engines. The ideal candidate will have a minimum of five years' experience, strong troubleshooting skills, and the ability...Mechanical
- ...performing tool maintenance, pre-job and post- job tool checkout. Rigging-up and rigging-down equipment at the well site. Service mechanical devices and building logging cable heads Perforating cable heads and maintenance on the tools Maintaining well site/DOT...MechanicalFlexible hours
- Flr Federal Solutions,LLC in Victoria, Texas, is seeking a skilled maintenance technician. The role involves performing various mechanical maintenance duties, ensuring rigging safety, and assisting senior mechanics in complex tasks. The ideal candidate should have a strong...Mechanical
- ...documenting all tasks. The ideal candidate will have 3+ years of experience with gas engines and compressors, familiar with health, safety and environmental procedures, and skilled in troubleshooting mechanical systems while delivering quality customer #J-18808-Ljbffr ArchrockMechanical
$2,807 per week
...Cath Lab Tech Location: Victoria, TX Agency: Coast Medical Service Pay: $2,807 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position Coast Medical Service is a nationwide...Full timeContract workShift work$2,214 - $2,460 per week
...Cath Lab Tech Location: Victoria, TX Agency: CrossMed Healthcare Staffing Pay: $2,214 to $2,460 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position At CrossMed...Weekly payFull timeContract workShift work$2,746 - $2,947 per week
...Cath Lab Tech Location: Victoria, TX Agency: Aya Healthcare Pay: $2,746 to $2,947 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position Aya Healthcare has an immediate...Weekly payDaily paidPermanent employmentFull timeContract workTemporary workLocal areaImmediate startRelocationShift work$2,668 per week
...Cath Lab Tech Location: Victoria, TX Agency: OneStaff Medical Pay: $2,668 per week Shift Information: Rotating - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 12/14/2026 About the Position We. Are. OneStaff. Medical. An...Hourly payWeekly payFull timeContract workWork experience placementShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Electro-Mechanical Tech I. Be the first to apply!



