Protection And Control Engineer
$49.62 - $69.46 per hourActalent
Protection And Controls Engineer
Join our dynamic Protection and Controls Department as an engineer dedicated to completing protection and control projects. Collaborate with both in-house and client engineers and designers, while offering training to junior engineers.
Responsibilities
- Work on green-field and brown-field (retrofit) Protection and Control Projects in substations.
- Set relays and conduct relay setting calculations using ASPEN, AcSELerator 5010 (SEL), and other software.
- Design settings in the appropriate format and issue them to the assigned Protection and Controls Supervisor using IPS.
- Mark-up and review protection schematics and elementaries.
- Utilize MOB Port to review equipment and materials established by substation engineers for Protection Designers.
- Work with equipment such as transformers, circuit breakers, buses, reactors, line disconnects, protective relays systems (SEL, ABB, etc.), and SCADA systems.
- Function as a project lead for protection and control projects.
- Perform all engineering and design activities with minimal direction.
- Lead, facilitate, and coordinate work activities of others within the work group, team, department, or external parties to complete substation projects.
- Provide training and guidance to lower-level employees.
- Identify and initiate corrective action when substation project objectives are not being met.
- Interpret codes and regulations and develop standards for construction projects.
- Promote engineering professionalism and standards.
- Develop, recommend, and implement plans by establishing goals, objectives, and requirements, including scheduling and resources for complex engineering.
- Travel to field substations is required, approximately 10-15% of the time.
Essential Skills
- Relay setting
- Relay Coordination Studies
- Protection System Design
- Protective Relaying
- Fault Analysis
- Short Circuit Studies
- Protection and Control
- Transmission Protection
- Power System Protection
- Load Flow Analysis
Additional Skills & Qualifications
- Over eight years of experience in utilities working with protection and controls.
- Over eight years of experience completing engineering projects from start to finish.
- Over eight years of experience setting relays and designing one-line diagrams.
- Bachelor's Degree in Electrical Engineering (ABET-accredited preferred).
- PE License is highly preferred. A clear path to obtaining a PE License is required if not currently held.
Job Type & Location: This is a contract position based out of New Albany, OH.
Pay and Benefits: The pay range for this position is $49.62 - $69.46/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type: This is a fully remote position.
Application Deadline: This position is anticipated to close on Jul 10, 2026.
About Actalent: Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email View email address on click.appcast.io for other accommodation options.
San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.
Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.
- ...K&A Engineering Consulting is a privately held company offering consulting, engineering, and design services to power utility and industrial clients. Protection and Control Engineer – Cary, NC We are seeking a highly motivated and skilled Protection and Control Engineer...SuggestedTemporary workFlexible hours
- ...Role: Protection & Control Engineer Overview FindTalent is a forward-thinking recruitment agency dedicated to connecting exceptional talent with industry-leading opportunities. We are partnering with a dynamic, growing company in the electric utility sector with a strong...SuggestedWork at officeRemote work
- Working remotely in a full-time capacity, the Protection and Control Engineer will design high-quality protection schemes for T&D substations and collaborate with cross-functional teams to ensure effective project execution. Key responsibilities Develop protection and...SuggestedFull timeRemote work
- ...Job Description At Hitachi Energy, we are driving the future of power systems through innovation and sustainability. As a Protection & Control Engineer, you will design and implement advanced protection and control systems that keep the grid safe, reliable, and ready for...Suggested
$110k - $160k
...Job Description Job Description VIP Staffing is Now Hiring: System Protection Engineer (I–IV or Principal) Texas City, TX $110K–$160K DOE Work on relay settings, system studies, NERC/CIP compliance, and high-voltage equipment up to 345kV. Great role for engineers...SuggestedFor contractorsImmediate startRelocation- ...Job Description Job Description We are looking for a protection and control technician to handle the commissioning on upcoming substation relay projects we have on the horizon. We are a growing company that puts our contractors first. Pay is negotiable and relative...For contractors
- The Opportunity The P&C Commissioning Engineer is responsible for on-site testing and commissioning of Intelligent Electronic Devices (IEDs) and associated protection and control systems for electrical substations. This role involves installation supervision, testing,...
- Hitachi Automotive Systems Americas, Inc. is seeking a Protection & Control Engineer in Raleigh, North Carolina. In this role, you will design and implement advanced protection and control systems for power grids, modernize substations, and collaborate with cross-functional...
- ...this position. Entergy will not sponsor candidates for work visas for this position. JOB SUMMARY/PURPOSE Provides protection and control design engineering services for transmission and distribution substations, along with technical guidance and support to asset...Local areaVisa sponsorshipWork visaNight shift
- Full-Time Protection & Controls Engineer Employment Type: Full-Time Experience Required: Minimum 4 years in Protection and Controls License: Valid Driver’s License Required FindTalent is seeking a skilled Protection & Controls (P&C) Engineer for one of our valued clients...Full timeFor contractorsWork at office
- Hitachi Vantara Corporation is seeking a Protection & Control Engineer in Atlanta, Georgia. The role involves designing and implementing advanced protection and control systems for substations, working with project managers and cross-functional teams to enhance grid safety...
- Hitachi Vantara Corporation is looking for a Protection & Control Engineer in Houston, Texas. The role involves designing advanced protection and control systems for power systems, collaborating with various teams, and ensuring compliance with standards. Candidates should...
- Hitachi Vantara Corporation is seeking a Protection & Control Engineer in Raleigh, North Carolina. You will design and implement advanced protection and control systems while collaborating with project managers and customers. The ideal candidate has a Bachelor's in Electrical...
- ...professionals like you to join our team. There has never been a better time to be a part of AtkinsRéalis! We are seeking a Protection & Controls Engineer to join our team in Binghamton, NY, Rochester, NY OR Orange, CT to lead and work on various Power Substation and P&C...Hourly payFor contractorsRelocation packageFlexible hours
$107.3k - $139.48k
...is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and... ...chance to build a meaningful, long‑term career! Job title - Protection & Controls Engineer Job location - Denver, CO (Centennial) Job type...Full timeTemporary workFor contractorsWork at officeLocal areaRemote workFlexible hoursNight shift2 days per week- Qualus is seeking a Protection & Control Engineer through its 2026 Engineering Boot Camp. This full-time role provides immersive training, focusing on essential design and development in the power industry. The position requires coordination with design teams, development...Full time
$110k - $150k
We are currently looking for a Protection and Control Engineer with a minimum of 10 years of experience in protection and control system design, cost estimating, and bidding document preparation for commercial, industrial, generation and renewables. Typical system voltage...Temporary workImmediate startFlexible hours- [Pembroke Pines, FL, 33026], United States 3 - 5 Years N/A Posted 3 days ago Job Description Job Title: Protection & Control Engineer Job Summary Client seeking a skilled Protection & Control (P&C) Engineer with experience in substation design, relay coordination/settings...
$100k - $115k
...REMOTE Protection & Controls Substation Engineer 1 day ago Be among the first 25 applicants This range is provided by Jobot. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more. Base pay range $100,000.00/yr -...Temporary workLocal areaRemote workFlexible hours$90k - $117k
...We are currently looking for a P & C Engineer with a minimum of 5 years of experience in protection and control system detailed design, cost estimating, and bid document preparation for commercial, industrial, generation, renewables, and utility power systems. Duties...Temporary workFlexible hours$110k - $150k
A leading engineering firm is seeking a Protection and Control Engineer in New York. Ideal candidates will have at least 10 years of experience in system design and bidding preparation. Responsibilities include designing projects, creating essential documentation, and...Flexible hours- A leading recruitment agency is seeking a skilled Protection & Control Engineer for a dynamic company in the electric utility sector. The role involves ensuring the reliability and compliance of power systems, conducting electrical studies, and designing protective relay...Remote job
$50 - $95 per hour
Overview Shermco Industries is seeking a Protection and Control Technician. Protection and Controls (P&C) Technician Why Shermco: Industry... ..., federal, or municipal clients. Bachelor of Science in Engineering or Technology in similar discipline, or Technical school diploma...Remote work- ...transmission and distribution substation protection projects, prepare equipment technical... ...and maintain data as required for other engineering‑related work. Take responsibility for... ...preparing and reviewing protection and control drawings. Three years of experience in...Remote workFlexible hours
£50.1k - £75.1k per year
...Time | Flexible First options available The role At SSEN Transmission, you’ll join us as a Digital Substation Protection, Automation and Control (PAC) Engineer, playing a key role in building a smarter, more flexible network for Net Zero, one that delivers clean, secure...Permanent employmentFull timeFor contractorsRemote workFlexible hours- ...PROENERGY, we emphasize a ONE-TEAM approach where our Engineering, Procurement, Construction, Start-Up, Document Controls, and Operations teams work seamlessly for our... ...for the power industry. We seek a Lead Protection & Controls Engineer that has a passion for ownership...Contract workWork experience placementWork at officeRemote workWork visaFlexible hoursWeekend work
$87.63k - $106.35k
Engineer - Engineer Sr (Protection and Controls Engineer)Skip to main content#Engineer - Engineer Sr (Protection and Controls Engineer) page is loaded## Engineer - Engineer Sr (Protection and Controls Engineer)Applylocations: New Albany, OHtime type: Full timeposted on:...- A leading engineering firm is seeking a skilled Protection & Controls Engineer to join their client in the utility sector. This role involves designing and implementing systems for substations, requiring a PE license and experience in protection systems. If you have a solid...
- EPE Consulting, Ltd. is seeking a qualified Electrical Engineer to design and develop electrical drawings for substation protection projects. The role involves preparing technical specifications and providing technical support while ensuring project quality and timely...Remote job
- Electrical Protection & Controls Engineer Motor City Electric Co. is seeking an experienced Electrical Protection & Controls Engineer to support the engineering, design, and implementation of protection and control systems for large industrial facilities and utility interconnection...Work at office
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Protection And Control Engineer. Be the first to apply!
- hvac controls engineer United States
- data center controls engineer United States
- controls design engineer - siemens United States
- process controls engineer United States
- flight controls engineer United States
- manufacturing controls engineer United States
- instrumentation controls engineer United States
- entry level controls engineer United States
- controls engineer intern United States
- controls engineer remote United States


