Utility Operator
WIN Waste Innovations
Utility Operator
WIN Waste Innovations is looking for a Utility Operator. Working under the supervision of the Shift Supervisor and the direction of the Control Room Operator, the Utility Operator will be responsible for the operation and inspection of various power plant systems including boilers and associated equipment.
Responsibilities
- Safe and efficient operations of assigned equipment in accordance with established plant operating procedures
- Monitor and inspect various boiler plant auxiliary equipment including pumps, motors, fans, dampers, air compressors, valves, mixers, conveyors, and electrical devices
- Accurately read and interpret data from meters, gauges, etc to identify and report equipment malfunctions or trends which indicate abnormal operating conditions or emergency situations
- Performs various sampling, ash sampling and treatment of water, as assigned
- Monitoring air pollution control equipment
- Maintains work areas in a clean, orderly, and safe manner
- Operate mobile equipment at times Bobcat, steer loader and forklift
- Operation of refuse cranes may be required, to include maintaining correct levels of refuse-fuel into the furnace, mixing refuse in the pit, and maintaining a fire watch over the pit and associated areas
- May be required to work extensive overtime hours during planned and un-planned maintenance
- Maintain positive work environment by acting and communicating in a manner so that you get along with customers, clients, vendors, co-workers and management.
Experience and Education:
- Three or more months related experience and/or training
- Mechanical skills sufficient to perform such tasks as replacement of shear pins, valve repacking, and equipment inspections
- Knowledge and skills to operate power plant auxiliary equipment, such as air compressors and dryers, hydraulic power units, forced draft fans, pumps, spray dryer and absorbers, and lime slakers
- Ability to work overtime and rotating shifts
Licensing:
- For the State of Massachusetts, there is a requirement for the Utility Operator to hold a Massachusetts 2nd Fireman's and Massachusetts Hoisting License, or ability to obtain these licenses within 9 months of hire.
Work Environment:
Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.
- Noise in work environment
Physical Demand:
- Stand
- Sit for prolonged periods of time
- Walk
- Handle tools, equipment, fine motor skills
- Reach with hands and arms
- Climb and walk on heights often greater than 4 feet
- Stoop, kneel, bend, push, pull, crawl
- Ascend and descend stairs and stationary vertical ladders as part of normal work activity and emergency egress situations
- Lift 50 lbs.
- Move about all areas of the plant, including catwalks, deck grating, and uneven surfaces
- Close vision, distance vision, peripheral vision, depth perception, corrected or otherwise
- Operate a 1.5-inch fire hose operating at 125 psi line pressure to the extent required to extinguish fire
- Operate fire extinguishing equipment ranging from handheld extinguishers to 200 lb portable units
- Access confined spaces and pressure vessels through standard 12" by 16" manways
PPE Required:
Work in areas under adverse conditions that may require the donning and use of personal protective equipment including, but not limited to, the following with average fatigue:
- Negative pressure respirator
- Positive pressure respirator
- Self-contained breathing apparatus (steel or composite bottle)
- Hardhat
- Approved safety shoes
- Eye protection
- Rubber suit and gloves
- Chemical resistant suit
- Heat resistant outerwear
- Flame resistant outerwear
- Approved hearing protection
- Gloves
- Safety harness
What You'll Enjoy:
- Industry leading benefits
- Multiple and flexible medical plans
- Outstanding PTO program
- Floating Holidays
- Strong 401k program and company match
- Tuition reimbursement plan
- College loan reimbursement
- College scholarship program for dependents
- Parental Leave Program
- Inclusive culture
- Employee engagement events
- Employee resource groups
WIN Waste Innovations is a waste management company committed to delivering essential waste management solutions to customers and communities supported by our team of 2,300 employees. We believe in preserving our environment for future generations while providing for today's needs. WIN Waste Innovations is a vertically integrated business with a platform of 50 strategically located collection, transfer, and disposal assets. These include waste-to-energy facilities, transfer stations, ash monofills, landfills, and fleets of rail cars and collection vehicles. We process more than 11 million tons of waste annually, converting 6.7 million tons of waste into clean, renewable energy that powers 340,000 homes. We recycle more than 234,000 tons of plastic, paper, and metals from the waste stream.
At WIN Waste Innovations, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled.
WIN Waste Innovations$46.47k
Pay Range: $22.34 per hour Shift: Monday to Friday, 8:00 am to 4:00 pm Boot Allowance: $280 per year What is the value of a WM Job? At WM we know that the value of a WM job is more than a paycheck. It's a way to create opportunities for you and your family. This...SuggestedHourly payFull timeTemporary workWork experience placementLocal areaMonday to FridayShift workDay shift$15.49 per hour
...Utility WorkerResponsible for disassembling, cleaning and sanitizing of all food-processing equipment, including storage areas, manning the dish machine and pot washing stations, sanitation of floors -walls- mobile kitchen equipment, handling any and all line clean ups...SuggestedFull timePart timeLocal areaWeekend work- ...Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible...Suggested
$19.5 per hour
...Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible...SuggestedLocal area- ...preparedness and fire drills Drive community vehicle as assigned You play a key role in safety, compliance, and day-to-day building operations. Maintenance Assistant – Support Daily Repairs and Preventative Facility Maintenance Maintenance Assistant | Maintenance...SuggestedShift work
$35.39 per hour
...integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. Maintenance Mechanic - Dayton, NJ Shift: 3rd Shift Pay: $35.39/hr How you will impact WestRock :...Temporary workLocal areaFlexible hoursShift workNight shiftWeekend work$21.5 per hour
Job TitleLocation 1474 PROSPECT ST, Ewing, NJ, 08638, United StatesBase Pay $21.50 / HourJob Category FacilitiesIndustry Facilities, Building Repair, Building MaintenanceEmployee Type Full-Time Non-ExemptRequired Degree 2 Year DegreeMinimum Experience 3 YearsMaximum Experience...Full time$34.25 per hour
...Troubleshoot and repair hydraulic, pneumatic, and mechanical systems. Identify sources of mechanical issues by observing equipment operation and using precision measuring tools. Remove and replace defective components using hand tools, power tools, hoists, and...ApprenticeshipLocal areaWorldwideMonday to FridayShift workAfternoon shift- Performs maintenance and repairs on assigned Agency Facilities. Repairs may include but are not necessarily limited to plumbing, electrical work and carpentry. Maintain all facilities in a safe and orderly manner. Essential Functions Perform plumbing, electrical and carpentry...Agency workFor contractors
$27 per hour
About the Organization Catholic Charities, Diocese of Trenton is a faith inspired non-profit organization, mission-driven, family-friendly, and passionate about services to our communities. We offer a wide variety of exciting career opportunities in the areas of Direct ...Hourly payAgency workFull timePart timeFor contractorsMonday to Friday$800 per month
Job Description Job Description PEP BOYS / Mavis Tire - Automotive Tire Technicians Start Strong with Pep Boys & Mavis: Eligible Automotive Tire Technicians Receive Weekly Bonuses Totaling Up to $800! Pep Boys is now part of the Mavis Tire family -- and we're ...Hourly payWeekly payFull timeImmediate start$800 per month
...tires and wheels and perform tire services -- like rotations, balancing and flat repairs -- to keep our valued customers' vehicles operating safely. ~ While providing best-in-class automotive service, you'll get weekly bonus payments tied to every single service...Hourly payWeekly payImmediate start$800 per month
Job Description Job Description PEP BOYS / Mavis Tire - Automotive Tire Technicians Start Strong with Pep Boys & Mavis: Eligible Automotive Tire Technicians Receive Weekly Bonuses Totaling Up to $800! Pep Boys is now part of the Mavis Tire family -- and we're ...Hourly payWeekly payFull timeImmediate start$21.5 per hour
Job Title Location 1474 PROSPECT ST, Ewing, NJ, 08638, United States Base Pay $21.50 / Hour Job Category Facilities Industry Facilities, Building Repair, Building Maintenance Employee Type Full-Time Non-Exempt Required Degree 2 Year Degree Minimum ...Full time- ...RESPONSIBILITIES WILL INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING: Operate various types of mowing equipment to maintain fairways, greens,... ...walk intermittently Must be able to successfully complete our Utility Vehicle training program Job Posted by ApplicantPro...Part timeSeasonal workFlexible hoursNight shiftWeekend work
$60k - $78k
...pavements), pavement evaluation and design, geotechnical design and subsurface investigation, subsurface and utility mapping, and forensic studies. AID owns and operates an array of NDT equipment, including a Laser Crack Measurement System (LCMS), Falling Weight...Full timeRelocationNight shiftWeekend workDay shift- Job Description Job Description Mavis Tires & Brakes at Discount Prices - Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes at Discount Prices ! We're looking for a full-time Automotive Alignment Technicians to join Team ...Weekly payFull timeImmediate start
$800 per month
...tires and wheels and perform tire services -- like rotations, balancing and flat repairs -- to keep our valued customers' vehicles operating safely. While providing best-in-class automotive service, you'll get weekly bonus payments tied to every single service you...Hourly payWeekly payImmediate start$20 - $25 per hour
...ready to make an impact? Our Pavement Maintenance Technicians utilize our specialized equipment and apply materials on pavement... ...high-quality project Communicate job status daily with the Operations Manager Maintain a safe, hazard-free job site WHAT YOU...Hourly pay- ...as directed by Maintenance Supervisor and Manager. Inspects and maintains all tools in excellent condition. Must be aware of all utility meter cut-offs, apartment and fixture cut-offs, sewer cleanouts. Performs work area clean-up and safety related duties....Full timeWork at officeImmediate startShift work
- ...contractor work permits and other SH&E permits. Maintain a questioning attitude to ensure a safe work environment. Adhere to Standard Operating Procedures (SOP's) and Work Instructions. Complete necessary forms, charts etc, to document the process. Respond appropriately to...For contractorsShift work
- ...Assists in the repair of woodworking machinery, infeed/outfeed systems, hand tools, and forklifts in accordance with diagrams, operating manuals, and manufacturer specifications Orders supplies and parts as required Performs preventive maintenance as scheduled...Afternoon shift
- Benefits Employee discounts Health insurance Paid time off At Midas, we are dedicated to providing quality service to customer vehicles due to our years of automotive repair experience. We are looking for a General Maintenance Technician to assist in maintaining and repairing...For contractorsWeekend work
- ...customer satisfaction, and produce quality products. Successful candidates will be a part of a production line team which requires operating production equipment and will also come with advanced mechanical abilities. This position reports to the Process Leader and...Shift work
- ...and innovate with a better world in mind. We boldly challenge what's possible for a sustainable world.Roles ResponsibilitiesEnsures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools,...Apprenticeship
- ...make an impact? Job Summary Our Pavement Maintenance Technicians utilize our specialized equipment and apply materials on pavement... ...a high-quality project Communicate job status daily with the Operations Manager Maintain a safe, hazard‑free job site Qualifications What...Flexible hours
$34.9 per hour
...Performs any combination of (but not limited to) the following duties according to specific department guidelines: Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor...Hourly payWork from homeShift workNight shift$15.49 - $19 per hour
Maintenance is responsible for the day to day coordination and oversight of all aspects of the upkeep of the physical plant and its surroundings. This includes, but is not limited to minor plumbing, electrical, mechanical, and cosmetic repairs. Job duties include, but ...Hourly payFull timeMonday to Friday- Responsibilities: - Repair or replace bearings, belts, chains, couplings, and drive components - Perform motor alignment and mechanical adjustments - Diagnose mechanical failures causing downtime or quality issues - Support equipment rebuilds and mechanical overhauls - ...
- Maintenance MechanicStrictly adheres to Company and plant safety policies and procedures.Completes all annual training as required.Works with the Engineering Department to build and assemble dies according to specifications and blueprints and the ability to build more ...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Utility Operator. Be the first to apply!





