Cable Splicer Helper
Frontier Communications
Cable Splicer Helper
Connects, rearranges, repairs and maintains outside cable; climbs poles, works aloft on platforms as well as under ground in manholes, cable vaults and ditches. Performs other duties as may be assigned.
Duties include, but are not limited to, the following:
- Wears appropriate safety apparel and is aware of and follows all established safety practices and procedures.
- Loads necessary tools, material and equipment on Company vehicles and drives or rides to work locations.
- Connects and rearranges cable facilities associated with aerial, buried, underground and in buildings according to engineering design by utilizing hand tools and specialized equipment.
- Utilizes special test equipment to test for and locate cable trouble and perform cable completion tests.
- Works with open flame and hot liquids such as molten lead to make airtight closures on cable sleeves.
- Reads and interprets work prints and diagrams and is familiar with current practices pertinent to each job assignment.
- Climbs poles; works aloft on platforms or in vehicle-mounted buckets; enters tunnels, buildings, trenches, splice pits, cable vaults and manholes.
- Uses test equipment to check for gas in manholes and empties water and debris from manholes.
- Operates power equipment such as pumps, compressors, blowers, backhoes and trenchers.
- Monitors and ensures proper cable pressurization is maintained.
- Inspects vehicles for safe operating conditions, and ensures proper servicing is done on such vehicles.
- Maintains accuracy in all reporting functions.
- Works long hours during cutovers, emergency conditions or in inclement weather. Work may be performed aloft in winter or at night; also in dirty, damp manholes often in awkward positions. Work involves considerable eye concentration. Repair work is done under the pressure of time.
- Heavy lifting may be required in handling tools, materials and supplies.
- May be required to work day, evening or night tours, overtime, emergency call-outs, weekends and out-of-town assignments as required.
- Plans and supervises work of cable splicer helper.
- Classroom training may be away from home location.
- May be required to perform additional duties and tasks as required by the Company.
Basic Qualifications:
- Tests Results obtained in standard tests for this position must meet minimum requirements established by the Company, in accordance with Company policy.
- Must be able to read, write and perform the following mathematical calculations: addition, subtraction, multiplication and division.
- Previous experience as a Cable Splicer Helper or other related experience would be helpful.
- Must have ability to distinguish true colors.
- Normal hearing; must be able to distinguish tones.
- Requires climbing poles/ladders up to 60 feet.
- Requires frequent lifting up to 75 pounds; occasional lifting up to 150 pounds.
- Frequent reaching or moving of heavy objects by shoving or pulling with arms and hands.
- May require frequent stooping and crawling in restricted area, including vaults.
- Requires prolonged standing and off-balanced positioning while working aloft.
- May work outdoors in all weather conditions.
- Valid state driver's license.
- Ability to drive vehicle with manual gear shift.
Training:
- Classroom and on-the-job training.
Frontier Communications is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.
Frontier Communications- Ironworker Helper - Baytown II, Texas We are seeking an experienced Ironworker Helper to join our team on the Baytown II project. This... ...Set up and maintain rigging equipment; handle chains, slings, cables, and hooks. Use crane hand signals and communicate effectively...CableFlexible hoursShift work
- ...jobsite located in Baytown, Texas has an opening for an Ironworker Helper. What You Will Do Assemble and secure structural supports... ...Assisting Ironworker in attaching loads using chains, slings, cables, hooks, and other related equipment. Able to manually handle and...CableFlexible hoursShift work
- ...raceway systems comprised of rigid aluminum, galvanized steel, PVC and PVC coated conduit and aluminum, galvanized steel and fiberglass cable tray. Installation and termination of single and multiple conductor cables. Installation of electrical devices such as light...Cable
- ...DesignsCareer Field: Maintenance & Skilled TradesJob Number: 189407Apply: JobThe jobsite located inBaytown, TXhas an opening for a Material Helper.Our TeamOptimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise in...SuggestedFlexible hours
- ...Field: Maintenance & Skilled TradesJob Number: 188745Apply: Job The jobsite located in Mont Belvieu, TX has an opening for a Civil Helper. Our Team Optimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise...SuggestedFlexible hoursShift work
- ...PainterHelpers (includes helpers 0 months- helper 42 months) - Preferred minimum of 6 months documented field experience in chosen craft discipline. Must have the ability to read and interpret instructions and documentation. The level and degree of job responsibilities...Local areaImmediate startFlexible hours
- ...Knowledgeable in hand signals for operators and the impact of soil conditions on underground installations and cables.Skilled in directing and training apprentices and helpers to meet production requirements.Maintains personal tools in accordance with company policy.Competent...CableApprenticeshipLocal area
- Electrician Helper - Austin Industrial (Baytown, TX) Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions...Work visa
- ...Ability to use mechanical benders; use hydraulic benders 2" - 4"; fabricate and install conduit supports Ability to do wire and cable installation by hand, by machine, and in cable trays. Physical Requirements: * Climbing, Balancing, Stooping, Kneeling, Crouching...CableRelocation
$13 per hour
...Quality Coating Helper Baytown, Texas, United States $ None - 13.00 (US Dollar) Quality Coating Helper Alltex Personnel Duties: Assist in preparing and feeding coating solutions Monitor oven temperature and cloth movement Touch up coating defects and inspect quality Clean...Rotating shift- SUMMARY Assists journeyman level pipefitters in laying out, fabricating, assembling, installing and maintaining piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment for steam, hot water fixtures and equipment for steam, hot water, heating...Local areaImmediate startFlexible hours
- ...most efficient processes and the right tools for the job. Qualifications and Detail about the Position Summary: A Helpers is responsible for performing general non-craft labor as assigned. Responsibilities: Promote, demonstrate and instill Brock...Full timeFor contractorsWork at officeShift work
- Top Tech Opportunity Benefits: ~401(k) ~401(k) matching ~ Bonus based on performance ~ Competitive salary ~ Dental insurance ~ Employee discounts ~ Free uniforms ~ Health insurance ~ Opportunity for advancement ~ Paid time off ~ Vision insurance...ApprenticeshipWork at officeNight shift
- ...communicate effectively with co-workers.Manual dexterity required for operating machinery.This job requires the ability to run conduit, cable tray, wiring and perform terminations.Above average knowledge of general manufacturing processes, procedures, and machinery.To...CableWork at officeFlexible hours
- HelpersPreferred minimum of 6 months documented field experience in chosen craft discipline. Must have the ability to read and interpret instructions and documentation. The level and degree of job responsibilities and requirements vary depending on months of experience...Local areaImmediate startFlexible hours
- ...Ironworker HelperThe jobsite located in Galena Park, TX has an opening for an Ironworker Helper.Optimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise in the natural gas, natural gas liquids, and petrochemical...Flexible hours
- ...hand tools like shovels, rakes, and picksPerform fiber blowing operations as directed, assisting in the installation of fiber optic cable in conduits using fiber-blowing equipmentConduct general labor on construction sitesConduct placement of conduit as directed by the...CableTemporary workWork experience placementRelocationFlexible hours
- ...Your Job The jobsite located in Mont Belvieu, TX has an opening for a Pipefitter Helper. Our Team Optimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise in the natural gas, natural gas liquids...Shift work
- Austin Industrial in Baytown, TX is seeking an Electrician Helper to assist the electrician with assembly, installation, testing, and maintenance of electrical wiring and equipment, using hand and power tools. You will help diagnose issues and support corrective actions...
$34 per hour
...devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps. Install ground leads and connect power cables to equipment, such as motors. Perform business management duties such as maintaining records and files, preparing reports and...CableHourly payFull timeLocal areaWork visa- Millwright HelperLocation(s) Baytown, Texas Company Optimized Process Designs Career Field Maintenance & Skilled TradesJob Number 188047Millwright HelperSimilar jobs:Millwright Location: Brandon, Manitoba Job Number: 184027Millwright- Prosperity Plywood Location: Prosperity...
- ...walls, touch panels, speakers, and more, delivering immersive experiences that captivate audiences. Key Responsibilities Include Cable Management: Pulling and terminating cables with precision and assembling racks, patch bays, and mixing consoles. Technical...CableShift workNight shiftWeekend work
- ...devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps. Install ground leads and connect power cables to equipment, such as motors. Perform business management duties such as maintaining records and files, preparing reports and...CableLocal areaWork visa
$14 - $16 per hour
...Millwright Helpers – $14–$16/hrWe are seeking Millwright Helpers to join our team in a fast-paced industrial environment. This role is ideal for individuals who want to grow their mechanical skills and support experienced millwrights on a variety of projects.Pay: $14.0...Hourly pay- Optimized Process Designs seeks an Ironworker Helper for our Baytown, TX jobsite. You will assist with assembling/securing structural supports, learn from Ironworkers, and handle structural steel components using standard hand tools and safety equipment. Responsibilities...
- Helpers (includes helpers 0 months-42 months). Preferred minimum of 6 months documented field experience in chosen craft discipline. Must have ability to read and interpret instructions and documentation. The level and degree of job responsibilities and requirements vary...Local areaImmediate start
- Koch Business Solutions, LP located in Baytown, Texas, is seeking an Ironworker Helper to support field crews on heavy structural projects. The role involves assisting with rigging, load attachment, and basic steel assembly while maintaining safety standards. The position...Remote workShift work
- Koch is seeking an Ironworker Helper for the Baytown II project in Baytown, Texas. The role involves assisting skilled ironworkers with assembly, erection, and rigging of structural steel components on site. Responsibilities include reading drawings, using hand tools,...Remote workShift work
- Your Job The jobsite located in Pipefitter Helper. Our Team Optimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise in the natural gas, natural gas liquids, and petrochemical industries. OPD is part of the...
- ...effectively with co-workers. 1.4. Manual dexterity required for operating machinery. 1.5. This job requires the ability to run conduit, cable tray, wiring and perform terminations. 1.6. Above average knowledge of general manufacturing processes, procedures, and machinery....CableWork at officeFlexible hoursShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Cable Splicer Helper. Be the first to apply!


