Quality Inspector III
$28 - $35 per hourHowmet Aerospace
Howmet Fastening Systems (HFS) is seeking a Quality Inspector III for our Torrance, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we’re the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.
Summary:
Directly involved in the inspection of products in the in-process and final inspection areas. Uses precision inspection tools and equipment, manufacturing drawings (blueprints), and procedures and instructions to verify product acceptance to specifications and requirements. Performs and maintains a thorough understanding of all inspection processes, including MRB, receiving, in-process, and final inspection, and supports accurate and timely product acceptance.
Essential Duties and Responsibilities:
Independent Inspection: Independently performs dimensional inspection of all characteristics of manufactured products and ensures product acceptance to specifications and requirements with minimal supervision.
Advanced Blueprint & Specification Interpretation: Reads and interprets work instructions, routers, blueprints, drawings, specifications, and inspection requirements to determine product conformance and make appropriate inspection decisions.
First Article Inspection: Performs First Article inspections under compressed delivery schedules and applies AS9102 requirements to verify part acceptability. The position combines technical drawing interpretation, AS9102 compliance, inspection execution prior to ship, quality documentation, customer acceptance and approval management.
Customer portal and Net Inspect submissions: Obtains and sustains the necessary customer portal credentials and accesses via training and annual surveillance audits. Maintains a unique customer provided inspection stamp for sourcing.
Quality Documentation & Rejections: Prepares required inspection documentation and writes internal rejections for Quality, Manufacturing, and vendors when product does not meet requirements.
MRB & Nonconformance: Evaluates MRB dispositions for accuracy and acceptability and applies knowledge of the nonconformance process when determining appropriate quality actions.
Product & Process Expertise: Maintains a thorough understanding of applicable product-line inspection standards, manufacturing operations, material and coating specifications, and departmental identification methods and requirements.
NDT Inspection: Performs applicable NDT inspection, including black light inspection to identify discontinuities, inclusions, piping, grinding checks, cracks, and other defects. Completes required NDT training and cross-trains in additional Quality activities.
Problem Solving & Process Improvement: Uses problem-solving techniques to identify quality issues and actively participates in process improvement initiatives and corrective activities.
Training & Knowledge Sharing: Trains Quality Technicians I–III and new inspection employees as required and provides guidance on inspection methods, requirements, and procedures.
Cross-Functional Support: Works directly with Engineering, Manufacturing, Planning, and other departments to communicate Quality Assurance requirements, resolve inspection concerns, and support manufacturing operations.
Independent Work & Prioritization: Performs routine duties with minimal supervision, prioritizes multiple tasks, and manages workload effectively in a fast-paced manufacturing environment.
Team & Department Support: Participates in proactive team efforts, supports departmental and company goals, and performs other duties as assigned.
Safety & Compliance: Maintains a clean, safe, and orderly work area; complies with all safety policies, procedures, and practices; and reports unsafe activities or conditions.
Other Duties: Perform other duties as assigned.
Supervisory Responsibilities:
This job has no supervisory responsibilities.
Education, Experience, and Qualifications:
High School Diploma or GED required.
3-5 years of quality experience.
Ability to read and interpret blueprints, work instructions, policies, procedures, safety rules, and operating instructions in English.
Familiarity with First Article requirements per AS9102.
Understanding of Federal Aviation Administration (FAA) requirements and their impact.
Ability to evaluate MRB dispositions for accuracy and acceptability.
Ability to follow detailed written and oral instructions and apply problem-solving techniques.
Ability to train and provide guidance to other employees.
Ability to prioritize and manage multiple tasks simultaneously.
Basic shop math skills, including algebra.
Demonstrates accuracy, attention to detail, and commitment to quality.
Ability to plan work activities, use time efficiently, and complete work in a timely manner.
Demonstrates awareness of and compliance with EHS safety and security guidelines.
Manual dexterity is sufficient to perform inspection activities and train others.
Must be legally authorized to work in the United States. Visa sponsorship is not available for this position.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
The employee is responsible for maintaining fitness-for-duty while holding the above-described position and should be able to perform the essential tasks of the position in a safe, appropriate and effective manner. This refers to the physical, mental and emotional duties of the job.
Must be able to lift/move 30 lbs. (may not exceed per EHS policies) 
Must be able to stand for long periods of time  
Reaching above and below, stooping, kneeling, crouching, and bending.
Need to be able to wear safety steel toe shoes and walk around shop floor environment as needed.
Be able to remove dangling jewelry for shop floor assigned tasks, and wear hearing protection as needed.
Benefits/Salary:
The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location.  The salary range for this position is $28-$35/hr.
Compensation and Benefits:
If a pay range is identified for this job, it is based on a good faith estimate at the time of this posting. Actual compensation is subject to variation due to factors such as education, experience, skillset, market/business considerations, and/or location.
Howmet Aerospace offers a competitive benefits package to support the health, financial well-being, and professional growth of our employees. Benefits include:
Comprehensive medical, prescription, dental, and vision benefits coverage, including FSA and HSA account options
Pre-tax and Roth 401(k) retirement savings plans offering employer matching funds and a separate employer retirement contribution
Paid holidays and vacation time (eligibility, accrual, and usage are discretionary and governed by applicable policies)
Paid parental leave and adoption assistance programs
Life insurance and disability coverage plans
Optional coverage plans for auto, home, legal, identity theft, and pet insurance
Tuition Assistance Program and ongoing professional development opportunities
Employee Assistance Program (EAP)
Our Story:
Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at Follow: LinkedIn ( , Twitter ( , Instagram ( , Facebook ( , and YouTube ( .
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email: View email address on click.appcast.io
$28 - $35 per hour
...Dollar Minimum Pay 28 Maximum Pay 35 , Responsibilities Howmet Fastening Systems (HFS) is seeking a Quality Inspector III for our Torrance, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold...SuggestedFull timeFlexible hours- ...Quality Control Inspector III (Aerospace/Defense) The Marvin Group is a leading defense contractor, playing a crucial role in the development and manufacturing of various systems for military aerospace and vehicles. Position Summary Become a key contributor in ensuring...SuggestedPermanent employmentFor contractors
- ...including major military prime contractors such as Lockheed Martin, Northrop Grumman, and Raytheon. Position Summary: Quality Control Inspector inspects products for compliance with MLS processes, procedures, and contractual obligations with experience in inspection...SuggestedPermanent employmentContract workFor contractorsWork experience placement
- ...Quality Inspector (Falcon & Dragon) Hawthorne, CA SpaceX was founded under the belief that a future where humanity is out exploring the... ...ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 11...SuggestedPermanent employmentTemporary workWork at officeAll shiftsShift workWeekend workDay shiftAfternoon shift
$24 - $31 per hour
...Quality Inspector - Supply Chain Avionics Hawthorne, CA SpaceX was founded under the belief that a future where humanity is out exploring... ...ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 11...SuggestedPermanent employmentTemporary workAll shifts$27 - $34 per hour
...the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! INCOMING QUALITY CONTROL INSPECTOR III – MECHANICAL Based on-site at our Long Beach, CA facility the INCOMING QUALITY CONTROL INSPECTOR III - MECHANICAL is...Hourly payPermanent employmentWork at officeLocal areaFlexible hoursShift workWeekend work- ...include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development,... ...that wins. Job Description Job Description Summary QC Inspector: Performs inspections, checks testing and sampling procedures...Permanent employmentFull timeWork experience placementLocal area
$42 per hour
...Description: If you're looking for a job ASAP and you have Quality Inspection experience, then this is the role for you! A popular... ...company in Hawthorne is looking for multiple Quality Inspectors to join the team! Aerotek provides a rapid interview process...Weekly payContract workTemporary workImmediate startMonday to FridayShift work$29.21 per hour
...microscopes, magnifiers, and measurement instruments to verify component placement, solder joints, polarity, labeling, and workmanship quality. Inspect both through-hole and surface mount assemblies at incoming, in-process, and final stages. Identify defects, document...Hourly pay$24 - $25 per hour
...long history of developing innovative solutions to bring a better quality of life to the world. Healthcare, security, and defense are... ...diagnostics. OSI Electronics is seeking an In-Process Inspector to join their team. This individual will perform inspection and...Hourly payFull timeWork experience placementLive inWorldwideFlexible hours$22.5 - $28 per hour
...Quality Inspector Country United States of America State / County California City Gardena Division EPD Company Permaswage Gardena Function Quality Workplace Type On-Site...Hourly payPermanent employmentFull timeWorldwide- ...depending on site operational needs, flexibility required Preferred Qualifications • Airframe and Powerplant License • Knowledge of Quality Assurance principles, methods, and processes • Knowledge of Avionics and electrical systems is preferred • Knowledge of Aerospace...Work at officeLocal areaShift workDay shift
$79.04k - $93.6k
...Quality Control Inspector The Quality Control Inspector plays a hands-on role in performing receiving inspections, in-process inspections, and quality verification activities for portable energy storage products. This position works closely with Production, Engineering...Permanent employmentWork at office$26 - $34 per hour
...Quality Control Inspector Broadata Communications, Inc. (BCI) – Torrance, CA On-site Broadata Communications, Inc. (BCI) is a privately held California-based corporation and a leader in developing innovative, market-driven products for the transmission of digital...Hourly payWork at officeFlexible hours- ...Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Job Summary The Aerospace Quality Inspector performs in-process and final inspections of machined parts to ensure compliance with engineering drawings, customer...
$28 - $35 per hour
...markets. We design, develop, and manufacture advanced products for ground, maritime, and airborne applications. We are seeking a Quality Inspector to perform in-process, final, and source inspections on electro‑mechanical assemblies, printed circuit board assemblies, and...Permanent employmentWork at officeFlexible hours- ...Pay rate: $29.91/hr on W2. Description: PRIMARY FUNCTION: 1 Reports to the Quality Manager or designated authority. Responsible for performing in-process and/or Final Inspections of electronic component parts, assemblies, and sub-assemblies as required. ESSENTIAL FUNCTIONS...Work at officeRelocation
$25 - $35 per hour
...Overview Job Title: Quality Inspector Job Location: Torrance, CA Salary: $25.00-$35.00/hr DOE Stellant Systems currently has an opening for a Quality Inspector at our Torrance, California location. In this position, you will perform receiving, in-line & final...Permanent employmentLocal area- ...hardware under AS9100 and NADCAP welding accreditation. This Level 2 inspector works independently on incoming, in-process, and final... ...floor Required qualifications High school diploma or GED 3+ years quality inspection in aerospace or defense manufacturing Experience inspecting...
- ...Position Summary Under direct supervision level one QC Inspector performs basic mechanical inspection processes, such as dimensional checks and process verifications serving areas such as receiving, stock and final inspection. The QC Inspector demonstrates the basic ability...
$30 - $35 per hour
..., SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective... ...competitors. We’re hiring for a Quality Mechanical Source Inspector. The schedule is for the first shift, part-time, 20-25 hours a...Hourly payPermanent employmentPart timeLocal areaRemote workWorldwideDay shift2 days per week3 days per week- ...About the job Quality Assurance Inspector The Quality Inspector level II is responsible for performing inspections throughout various stages of the manufacturing process to ensure aerospace components and assemblies meet customer, company, and industry quality...Work at officeMonday to FridayShift work
- ...Precision Castparts Corp. is seeking a QC Inspector to perform basic mechanical inspection tasks on receiving, stock and final inspection areas. You will use calipers, micrometers, height gauges, and thread gauges while following AS9102 processes and reading blueprints...
$26 - $38 per hour
...Quality Assurance Inspector At Singer Vehicle Design, we believe Everything is Important. That's why every nut, bolt, stitch, and finish matters when we restore and reimagine Porsche 911s into some of the most beautiful and respected cars in the world. We're looking...Hourly payTemporary workWork experience placementMonday to Friday$25 - $40 per hour
...Job Description Quality Assurance Inspector position conducts inspection of parts, materials, processes, and verifies assembly operations being perfonned per planning requirements during the manufacture and/or repair of helicopters, components and assemblies....Full timeImmediate startMonday to Friday$20 - $28 per hour
...Job Title - Quality Inspector (2nd Shift) Company Location - Gardena, CA On-site, Full Time, Direct Hire Pay Range; $20.00- 28.00/hr., DOE Job Summary of the Quality Inspector position The Quality Inspector is trained to develop the ability to use...Full timeLocal areaRelocationAfternoon shift$50k - $70k
...Team As part of the Regulations & Safety organization, Quality Assurance establishes the systems and standards that ensure products... ...across the company. The Role As a Production Quality Inspector, you will perform inspection and verification activities directly...Permanent employment$106k - $132.5k
...generated inline style */ Job Description The Manufacturing Engineer III is responsible for executing and optimizing manufacturing... ...This role focuses on applying engineering principles to improve quality, throughput, and cost efficiency while ensuring compliance with...Permanent employmentFull timeWorldwide- ...Full-Time Manufacturing Quality Inspector Our company is a leading manufacturer of precision medical devices, committed to delivering high-quality products that meet and exceed industry standards. We are seeking a detail-oriented and experienced Manufacturing Quality...Full timeWork at office
- ...Senior QA/QC Inspector - GD&T - Sheet Metal Manufacturing World class supplier of precision sheet metal assembly and fabrication, serving... ...experienced, focused QA/QC Inspector who will cover day-to-day quality tasks and assist with in-process inspections. Duties and...Permanent employment
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Quality Inspector III. Be the first to apply!
- quality operator Torrance, CA
- quality inspector Torrance, CA
- quality control assistant Torrance, CA
- quality assurance inspector Torrance, CA
- quality assurance assistant Torrance, CA
- quality control inspector Torrance, CA
- supplier quality Torrance, CA
- quality assurance quality control engineer Torrance, CA
- rn quality Torrance, CA
- quality Torrance, CA


