Welder II
MagnaFlow
Welder II - 1st Shift
Magnaflow is a leading manufacturer and supplier based in Oceanside, CA of premium products to the automotive aftermarket industry such as catalytic converters, performance exhaust and replacement exhaust. Through the Camburg division in Huntington Beach, CA. Magnaflow also supplies race-inspired performance suspension products and vehicle uplifting services, Magnaflow is focused on future growth through both new business development and new product introduction.
Advanced welding classification with expanded responsibilities including specialized processes, robotic systems, and complex assemblies. Welder operators are expected to work with greater independence and may support training of personnel.
Responsibilities:
- Perform spin welding operations using hand welder equipment per checklist
- Execute TIG welding (GTAW) on precision or specialized components
- Perform valve assembly welding per sequence and coating preparation work instructions
- Operate robotic welding systems, monitor weld quality, and perform adjustments
- Program robotic welder parameters and load weld programs
- Perform heat exchanger welding per handling and safety procedures
- Complete all W I responsibilities as applicable
- Support continuous improvement and knowledge transfer to W I team members
- Perform other duties as required
Qualifications:
- High school diploma or equivalent (some positions may require a technical welding certification or degree).
- Previous experience in a manufacturing or welding environment is typically required, though on-the-job training may be provided.
- Minimum of 5 years is preferred in welding stainless-steel products and is familiar with the MIG welding process
- Ability to read and interpret complex work instructions and assembly drawings
- Robot operation or programming experience preferred for advanced robot roles
- Bilingual training available in English and Spanish
What you need:
- Basic knowledge of OSHA safety regulations.
- Maintain accurate counts of parts produced daily.
- Maintain a functional work area that is consistent with Five "S" and Lean Manufacturing principles.
- Inspect parts produced to the company's quality standards, and fitment to the fixture.
- Close and general vision.
- Good hand eye coordination.
- Prolonged standing of up to 8 hours at a time.
- Requires the lifting of 50 lbs. Any lifting over 50 lbs. is to be lifted with the assistance of other individuals.
- Requires reaching above and below the shoulders.
- Welding helmet.
- PPE (Steel toe shoes, safety glasses, gloves, earplugs, etc.)
- PPE is mandatory for Spin Welding, TIG Welding, Valve Assembly, Robot Operation, and Heat Exchanger Welding
- Robot Programming does not require PPE but requires adherence to safety zones and lockout/tagout procedures
- Demonstrated proficiency in welding setup parameters and quality inspection
What's in it for you?
- Competitive Salary
- PTO, Sick Pay, Birthday Holiday, Paid Holidays
- Medical, Dental, Vision
- 401k Matching (Up to 5%)
- Education assistance
- Company sponsored events
- Growing department and team
- ...Welder II - 1st ShiftMagnaflow is a leading manufacturer and supplier based in Oceanside, CA of premium products to the automotive aftermarket industry such as catalytic converters, performance exhaust and replacement exhaust. Through the Camburg division in Huntington...Suggested
$30 - $35 per hour
...Critical Facilities Technician II Guided by our organizational values Take Ownership | Innovate Boldly | Win Together we collaborate closely with world-class surgeons and other partners to improve people's quality of life. At Orthofix, we want team members who build...SuggestedHourly payFor contractorsLocal areaShift workWeekend work$21 - $22 per hour
...Assembler II PrideStaff is seeking an experienced Assembler II in Carlsbad, Ca. Interested in this position? Give us a call at (***) ***-****. Position: Assembler II Pay Rate: $21/hr-$22/hr Hours: Monday through Friday from 6am to 2:30pm Location: Carlsbad...SuggestedHourly payPermanent employmentMonday to FridayShift work- ...Maintenance Mechanic II Our client, a world leader in life sciences and biotechnology, is looking for a Maintenance Mechanic II based out of Oceanside, CA. Job Duration: Long Term Contract (Possibility Of Extension) Company Benefits: Medical, Dental, Vision, Paid Sick...SuggestedLong term contractWork at office
$20 - $25 per hour
...TIG Welder - Camp Pendleton, CA Job Description ~ This role focuses on TIG welding aluminum structures that are installed on LCAC (Landing Craft Air Cushion) vessels. You will perform precision welds primarily in overhead positions and within confined spaces...SuggestedWeekly payContract workTemporary workMonday to ThursdayShift workDay shift- Perform inspection of product run through Automated Optical Inspection equipment as it is manufactured on the SMT line. Essential Duties and Responsibilities: Adhere to all ESD requirements and Board Handling. Use of Moisture Sensitive Device (MSD) handling requirements...Temporary workWork at officeLocal areaFlexible hours
- ...GED Ability to obtain a Secret Clearance. A minimum of three to five years of applicable welding experience ASNT NDT Level II Certification, ore relevant experience. One (1) other relevant technical certification or qualification such as American Welding Society...Relocation
- ...Job Description Job Description Position Title: Maintenance Mechanic II Location: Oceanside, CA 92056 Duration: 06 Months contract Pay rate: $22.00/hr on W2 Shift: 8 AM to 4:30 PM PT M-F Schedule may include a non-rotating 4-day (10 hour shift), one...Contract workImmediate startShift workNight shiftRotating shiftWeekend workDay shiftAfternoon shift
- ...mission? To bridge the talent gap with precision—Right Talent. Right Time. Right Place. Right Price. Title- Manufacturing Technician - II Location- Oceanside California,USA,92056 Duration- 12 months contract Onsite Position - 5 days/week Job description...Contract workShift workWeekend work
- Fluor Corporation in San Marcos, California, is seeking a skilled craftsperson to handle various welding and fabrication tasks. This role involves performing complex operations like oxyfuel cutting and material handling while ensuring adherence to safety standards. The...
- CNC Machine Operator Veridiam is a strategic manufacturing partner with over 60 years of experience serving the aerospace, industrial, medical, and nuclear markets. Our roots were formed in the exacting nuclear and aerospace industries, expanded into Medical where we have...Permanent employment
$22 - $28 per hour
...Handler IIOceanside, CA 92056OverviewSalary Range $22.00 - $28.00 Hourly Position Type Full Time Job Shift 2nd ShiftMaterial Handler II - 2nd ShiftWho are we:Magnaflow is a leading manufacturer and supplier based in Oceanside, CA of premium products to the automotive aftermarket...Hourly payFull timeShift workAfternoon shift- ...Summary The Field Service Technician II is responsible for performing basic to advanced maintenance functions, procedures, activities, and responsibilities associated with working on gas compression packages. Duties include learning from and assisting other technicians...Full timeTraineeshipWork at officeLocal areaWorldwideVisa sponsorshipNight shift
$18 - $19 per hour
Company Description Who is Steico Industries? STEICO has made its name manufacturing precision tube and duct assemblies to the world's major airframe manufacturers. We manufacture tube and duct assemblies. We work with a wide variety of materials including aluminum...Permanent employmentTemporary workFor contractorsImmediate startWorldwideFlexible hoursShift work- STEICO has made its name manufacturing precision tube and duct assemblies to the world's major airframe manufacturers. We manufacture tube and duct assemblies. We work with a wide variety of materials including aluminum, steel, titanium, and other alloys and produce parts...Permanent employmentTemporary workFor contractorsImmediate startWorldwideFlexible hoursShift work
$24.04 - $31.24 per hour
...organizations to seamlessly communicate and exchange data across different systems and devices. Summary: The Warehouse Specialist II will receive, unload, inspect, identify, store, stage, issue, package, label, and ship material. Responsibilities Essential Job...Hourly payContract workRelocation- Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and...Relocation
- ...forward is currently seeking a highly motivated Maintenance Mechanic opportunity in Oceanside, CA. Job Title: Maintenance Mechanic II Location: Oceanside, CA Duration: Contract - 7 months Rate: $50 to $55/hr on W2 Anticipated Start Date: ASAP...Full timeContract workTemporary workImmediate startShift workNight shiftRotating shiftWeekend workDay shiftAfternoon shift
- ...Summary You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$25 - $35 per hour
...layoff, recall, transfer, leave of absence, compensation, and training. Description ARMADA INC. POSITION DESCRIPTION TITLE: Welder REPORTS TO: Superintendent FLSA STATUS: Non-Exempt PAY RANGE: $25.00-$35.00 per hour DOE FT / PT STATUS: Full Time...Hourly payDaily paidFull timeFor contractorsLocal area$40.86 per hour
...pass full penetration joint details, for all joint and material thickness configurations May instruct and mentor less-skilled welders, as assigned Works with a sense of urgency, efficiency and productive out put Maintains safe work practices and adheres to safety...Hourly payContract workTemporary workApprenticeshipLocal areaFlexible hoursShift work- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$23 per hour
Job Description Job Description Handyperson, Light Maintenance Join a fast-paced, growing, and exciting company full of great opportunities! Kellermeyer Bergensons Services (KBS) has immediate full-time, permanent openings for a Handyperson. If you enjoy working...Hourly payPermanent employmentFull timePart timeLocal areaImmediate startShift work$23 per hour
Job Description Job Description Manitas, Mantenimiento Ligero – Servicios Exteriores ¡Únase a una empresa en rápido crecimiento, emocionante y llena de grandes oportunidades! Kellermeyer Bergensons Services (KBS) tiene vacantes inmediatas de tiempo completo y permanentes...Hourly payLocal area$24 - $29 per hour
...Job Description Job Description job Summary: The Structural Steel Labor assists fabricators, welders, and fitters in the daily operations of a structural steel fabrication shop. This position supports the preparation, assembly, and finishing of steel components,...Monday to Friday- Job Description Job Description JOB RESPONSIBILITIES: Perform all aspects of property maintenance, including preventative, corrective, deferred, and emergency maintenance under the supervision of the Maintenance Supervisor or Community Manager. General maintenance...Full timeFlexible hoursShift work
$28 - $31.78 per hour
Job Description Job Description We are a national staffing firm and are currently seeking a Manufacturing Technician for a prominent client of ours. This position is located in Oceanside, CA, 92056. Details of the position are as follows: Job Description...Contract workMonday to FridayDay shift- Job Description Job Description Onsite Position - 5 days/week 1st start date: 11/16 2nd start date: 12/15 Duration: 1 year Execute manufacturing processes on the floor under supervision, while rigorously following batch records, standard operating procedures...Shift workWeekend work
- ...knowledge of the trade and to have the basic hand and power tools needed for work. THIS IS A CONSTRUCTION JOB. SO EXTENSIVE CONSTRUCTION JOB SITE EXPERIENCE IS REQUIRED. YOU MUST BE A FABRICATOR. NOT JUST A WELDER. WAREHOUSE MANUFACTURING EXPERIENCE DOES NOT QUALIFY....
- Repair and Tool TechnicianPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder II. Be the first to apply!



